Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

Pay it Forward?
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=13&t=263056
Page 7 of 8

Author:  p0rter2000 [ Tue May 19, 2015 1:16 pm ]
Post subject:  Re: Pay it Forward?

I would like to give them all to somebody that could use them.
If somebody had something to trade that would be fine. Otherwise if they would cover shipping that would be great.

Author:  Ronno [ Wed Jul 29, 2015 12:22 am ]
Post subject:  Re: Pay it Forward?

This thread was started as not an “I’ll trade you if you have something I need” it was “I have this to offer to anyone and the person who takes it has to have something to offer to anyone… “ It may not be the same person YOU are sending something too. It is just you take something, you then post something for someone else to take…

That is what it was meant to be and it has grown into I’ll trade you for something you have I want….

Just some FYI for all who read this thread…

Author:  PyroTekRob [ Wed Jul 29, 2015 2:38 pm ]
Post subject:  Re: Pay it Forward?

Darn, I don't have anything. Guess I'll just buy what I need to get started.

Author:  Jeffbo [ Thu Oct 08, 2015 9:10 pm ]
Post subject:  Re: Pay it Forward?

It ain't much but I have at least 225 once fired AAHS 28ga hulls

Author:  Customstox [ Thu Oct 08, 2015 10:46 pm ]
Post subject:  Re: Pay it Forward?

Jeffbo, I will take them and I have two bags of Winchester 12 gauge AA Field Wads WAA12F114 for 1 1/4 to 1 3/8 ounce loads to offer.

Author:  Jeffbo [ Fri Oct 09, 2015 12:07 pm ]
Post subject:  Re: Pay it Forward?

Customstox wrote:
Jeffbo, I will take them and I have two bags of Winchester 12 gauge AA Field Wads WAA12F114 for 1 1/4 to 1 3/8 ounce loads to offer.

PMme with your addres and I'll get 'em out tomorrow or Monday
Jeff

Author:  javelinablanco [ Fri Oct 09, 2015 4:41 pm ]
Post subject:  Re: Pay it Forward?

Hi guys,
So I found a few field hulls and picked them up, still don't have a solid supply. These are my first loads and tested and performed flawlessly. However the crimps look as though they were done by a hammer and spoon :( After further investigation it turns out that I have a 6 point spindex pre crimper on my MEC. These are Remington taper hulls and will require an 8 point. Does anyone have a spare laying around? My hulls would appreciate not looking like a 3rd grader loaded them.

Imageshells_JA by Justin A, on Flickr

Author:  only1asterisk [ Sun Feb 14, 2016 9:59 pm ]
Post subject:  Re: Pay it Forward?

I have 200 old AA hulls my son picked up at the range. Most of them have some life left if anyone wants them.

Author:  javelinablanco [ Mon Feb 29, 2016 1:21 am ]
Post subject:  Re: Pay it Forward?

only1asterisk wrote:
I have 200 old AA hulls my son picked up at the range. Most of them have some life left if anyone wants them.


Asterisk,
Just saw this. If you still have them I could use them. I have been reloading primarily Remington hulls. But since I'm just starting out these would help.

Author:  Ksprayberry [ Sat Mar 19, 2016 10:14 am ]
Post subject:  Re: Pay it Forward?

Free hulls, just pay shipping from 30064
I have the following:
34 black paper rst 16 ga 2-1/2
55 purple federal 16 ga 2-3/4
5 assorted 16 ga 2-3/4
40 red paper rst 12 gauge 2-1/2
I have them in a large flat rate box, they don't quite fill it up, so I can do two things. Fill it up with Remington gun clubs 12 gauge or I can try to fit them in a smaller box.

Sent from my iPhone

Author:  Ksprayberry [ Sat Mar 19, 2016 10:17 am ]
Post subject:  Re: Pay it Forward?

That I can tell, the above papers.. We'll all appear once fired

Author:  pbhickory [ Sat May 07, 2016 10:05 pm ]
Post subject:  Re: Pay it Forward?

JacksBack wrote:
I have 2 older MEC 600 jr presses, a 12 and a 20. Both have adjustable charge bars in them. I don't use them and would be happy to donate them to a club, school or church. The rub is I do not want to have to hassle with packing them up and shipping them since I'm giving them away, and why I'm offering them up here instead of the B&S. I am located in Silicon Valley CA, so if you are nearby and interested, PM me.


JacksBack,

Do you still have these two MECs? I have family in the area that can pick them up for me if you still are looking to give them up.

To pay it forward, I have a sample size set of some powders, including Hodgdon Universal and International, as well as a Winchester one I cannot recall the name of.

Author:  pbhickory [ Sat May 07, 2016 11:18 pm ]
Post subject:  Re: Pay it Forward?

Jeffbo,

Do you still have the AAHS 28ga once-fired shells?

Author:  tkrysl [ Mon Oct 17, 2016 7:34 pm ]
Post subject:  Re: Pay it Forward?

Sorry man. Saw some on eBay and nabbed em. Hopefully someone else can use them. Thanks!

Author:  parkerhale28 [ Sun Nov 27, 2016 12:42 pm ]
Post subject:  Re: Pay it Forward?

If you hate your gun shoot federal shells. None of them have plastic base wads as all of you probably know. I bought a brand new case, shot 100, went home to clean sxs 28. The right barrel was bulged right in the middle of the barrel. It bent into the other barrel. Don't shoot a gun like this. A gunsmith and metallurgist told me this. Also I am a retired neurologist and I know every time a weak spot is stressed on an artery it eventually becomes an aneurism. I called the man who sold them to me; he said it won't hurt a thing. Shoot it. It cost me $2,500 to replace this fine gun. Call me a chicken but I figure my head is worth a little more, at least I think so.

Author:  pjmx [ Sat Dec 17, 2016 6:04 pm ]
Post subject:  Re: Pay it Forward?

In the spirit of the holiday & because Curly would not take payment for a MEC part he sent me, I offer the following:

If there is another SGW addict in the greater Los Angeles area, (I live in Lancaster in the Antelope Vally), I would like to offer a free bag, (>425 count) of 410 wads (CB5050-410) to someone who needs these. I am willing to meet you half way when traffic is not too nasty.

Best way to contact me is thru a SGW PM.

...Pete

Author:  leftieD [ Sat Sep 01, 2018 4:06 pm ]
Post subject:  Re: Pay it Forward?

Reviving this old pay it forward thread with this offering:

Due to lack of interest - offer rescinded

Author:  MuelBin [ Thu Oct 04, 2018 7:52 pm ]
Post subject:  Re: Pay it Forward?

Nevermind, sorry.

Author:  Nhyrum [ Wed Oct 31, 2018 8:50 pm ]
Post subject:  Re: Pay it Forward?

ive got about a box(maybe two) of federal 3" 410 shells taking up space. im too much of a hoarder to throw them out.

Ive also got a handfull of oooold win AA's that are probably on their last leg. i paid i think a few pennies each and picked out the best a while ago. id prefer to send both to the same place. but i get not everyone loads 410

Author:  Nhyrum [ Thu Nov 01, 2018 6:17 pm ]
Post subject:  Re: Pay it Forward?

I've now got about 50 federal 10 gauge, 3-1/2 shells. I was in a hurry digging through the barrel at the shop and didn't pay attention. Pm me and they're yours

Page 7 of 8 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/