It is currently Wed May 23, 2018 9:23 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Fiocchi 2.5" 410 with 300MP?
PostPosted: Sat Feb 10, 2018 7:19 pm 
Diamond Grade

Joined: Wed Jun 05, 2013 12:52 pm
Posts: 1200
Location: Grayling, MI
Looking for load data for Fiocchi 410 1/2 ounce with 300MP. I have SP410 and AA410HS wads. Would need Fiocchi primers that fit. These are the same length as the AA410HS hulls I load and could work. Feds did, I use up 100 I was given. Same here with fiocchi hulls. Could use up a lbs of 410 powder too.

If I have to get wads too I will toss them out.




Top
 Profile  
 
 Post subject: Re: Fiocchi 2.5" 410 with 300MP?
PostPosted: Sat Feb 10, 2018 7:32 pm 
Moderator
Moderator
User avatar

Joined: Fri Nov 04, 2005 11:15 am
Posts: 21488
Location: Knoxville, Tn area Nyuck, Nyuck
I myself would have no trouble using data listed for the WWAAHS hulls for the Fiocchi hull. You could load up 10 of them with a recipe and send them off for testing

_________________
Let us endeavor so to live so that when we come to die even the undertaker will be sorry.
Mark Twain


Top
 Profile  
 
 Post subject: Re: Fiocchi 2.5" 410 with 300MP?
PostPosted: Mon Feb 12, 2018 10:07 pm 
Diamond Grade

Joined: Wed Jun 05, 2013 12:52 pm
Posts: 1200
Location: Grayling, MI
With the federals I just checked there loading data with the components I had and it was midrange a 1250 fps load. I had 50 hulls loaded them 2 times and they were done. I have 80 of these Fiocchi's will the SP410 fit these hulls? 616 on par or cooler than the win209?


Top
 Profile  
 
 Post subject: Re: Fiocchi 2.5" 410 with 300MP?
PostPosted: Tue Feb 13, 2018 8:45 am 
Field Grade

Joined: Fri Nov 27, 2009 5:50 pm
Posts: 73
I've been reloading Fio 2 1/2" 410's for some time That's what they sell at my club and find quite a few once fired. I use same recipe as AAHS: 300-MP and CB 5050-410HS but use Fio 616 instead of Win 209. Get at least 2-3 reloads. Only issue is you have to resize them each time and my Mec 600 jr ring resizer does not work well as it tends to expand the rim diameters so I use a super sizer instead it works well.
All the comparison 12 ga published data I seen of Win 209 vs Fio 616 give nearly identical pressures/velocities
SOAG


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 391TODT11, 737Mech, amg, B.L.E., barrelsquared, Big Midwest, bigalt, Bing [Bot], Blazerf3, captjsjr, Cass, CLuttrell, cptnball, D McMillen, David Spear, deadbird995, ded&ded, dfw_bill, DLC1951, DLeeTucson, drawdc, DrtRdr, eaglerjs, Eddie D, Google [Bot], Google Adsense [Bot], GP100man, GunCat, jml, Joe Hunter, jsand70, jtw, jwr50, kjs, kopper13, labloverva, mactownbob, Majestic-12 [Bot], Malcolm7, marist89, May, mdlott, Millertime875, mpolans, mryoung, Nicoli7153, NMGuy, Oldman1949, papillonkirby, perazzimx8l, Pettifogger1, razir66, reyper, riceducker, riflegunbuilder, righttoown, Roger Gascoigne, Rudolph31, sabcon, SG4343SG, Shaker, Slanski62, snooky, Tidefanatic, TimNichols, tjh12glen, Toolmaker777, trdjohn, Turpentine1, Vette Jockey, ysr_racer


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© 2017 Carbon Media Group Outdoors    - DMCA Notice