It is currently Fri Mar 24, 2017 7:03 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 81 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Fri Aug 20, 2010 4:31 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon Jan 25, 2010 7:23 pm
Posts: 111
Location: AK.
101, 26" bbls IC & Mod, w/ejectors I believe, receiver is of a 'shiny material" aluminum? engraved, stk is checkered.
S/N K300638 I'm of the belief it is of a later build. They want $850 for it. I would like to know its production date and whether this O/U is worth the money being asked for it. It does not have the red W on the bottom of the grip cap. the previous owner put sling swivels on it which tend to cheapen it. They can be removed.
thx in adv
Joe



_________________
Joe


Ducks Unlimited


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Tue Oct 12, 2010 3:04 pm 
Tournament Grade

Joined: Tue Oct 27, 2009 4:38 pm
Posts: 123
I am looking for the manufacture year for a Winchester 1300. Serial number L2557629.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Sat Oct 30, 2010 11:06 am 
Utility Grade

Joined: Sat Oct 30, 2010 10:40 am
Posts: 10
Location: The Great Lake State
Greetings,

I would like to know the Build Date of my SX1 serial # m37994

Thanks - Stan


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Thu Nov 11, 2010 10:26 pm 
Field Grade

Joined: Thu Nov 11, 2010 5:16 pm
Posts: 34
Location: SE Michigan
Here's mine: it was listed as "new" and in its original box. But according to your website, it has been discontinued for several years.

Winchester 1300 pump, 28" vented rib barrel, with three chokes. It is fully camo'd and has a serial number of L3554277.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Sat Dec 04, 2010 6:35 pm 
Field Grade

Joined: Fri Jan 01, 2010 10:46 pm
Posts: 45
I would like to know the age of this gun. My neighbor gave me his Winchester Ranger Model 120 12 Ga 2 3/4 & 3" MOD, no vent Rib, non checkered, Hardwood, SN: L1387786


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Wed Dec 29, 2010 10:26 pm 
Field Grade

Joined: Fri May 21, 2010 12:48 pm
Posts: 59
Hi there,

I am looking to buy a 1953 (I think) Winchester Model 12 Heavy Duck. But I noticed that it has a butt plate not a pink recoil pad. I want to confirm that this is indeed a Heavy Duck. Its serial number is 1344___. Can you tell me if this is a Heavy Duck gun or a regular 2.75" Model 12.

Thanks,


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Fri Dec 31, 2010 1:43 pm 
Tournament Grade

Joined: Fri Sep 18, 2009 6:14 pm
Posts: 288
Hi There,

Winchester Model 21 12 gauge 28" barrels w/ 13 3/4 LOP and a recoil on the butt. Serial #1546. Metal has original blueing and is in good condition although it is showing some wear. Wood is good, some dings, but nothing deep and the butt stock is a nice piece of wood. Forend is splinter in very good condition. The bore is beautiful and shinny. Double triggers. Any help is appreciated. Thanks,

John


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Mon Jan 31, 2011 4:23 pm 
Field Grade

Joined: Thu Jan 13, 2011 2:01 pm
Posts: 21
Winchester Super X-Model 1, 12ga. 28" bbl. VR with modified fixed choke in 98% condition. This is a Field gun. Recoil pad is not original. Buttstock and forend are near perfect. SN= M2160.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Tue Feb 01, 2011 1:23 am 
*Proud to be a*
*Proud to be a*

Joined: Thu Oct 04, 2007 6:35 pm
Posts: 97
Location: Texas
Need only date of manufacture - Win M12 serial number 16679XX.

Thanks


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Tue Feb 08, 2011 2:49 pm 
Utility Grade

Joined: Sat Oct 23, 2010 10:53 pm
Posts: 19
md_beatt wrote:
Value and/or date of mfg help us help you, will need:
Model #, barrel(s) length, choke(s), plain, solid rib, vent rib, stlye of stocks, plain walnut, checkered, to date it will need the S/N like this 654xxx or 1566xxx you get the idea.
Note: dating a Post 64 gun is not as easy as the pre 64 guns. Not much has been published.
Regards Dave


Winchester Super X Model 1, 30" VR barrel, scroll on receiver, checkered walnut, full trap, SN: M 57849.

Thanks!


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Tue Feb 15, 2011 3:32 pm 
Limited Edition

Joined: Fri May 28, 2010 8:05 pm
Posts: 481
Winchester SX1 (came with both 26"ICVR and 30"FVR barrels and a montecarlo stock, Im not sure if these are original) with a gold trigger and plain reciever. The stock is a nice grade of walnut. the SN is M706XX.

_________________
People in glass houses shouldn't sink ships

.45ACP is......(mind wandering)


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Wed Mar 02, 2011 2:40 pm 
Field Grade

Joined: Tue Feb 07, 2006 7:30 pm
Posts: 28
I was just gifted a Winchester 1400 Ranger shotgun/accessories. I have looked around and haven't turned up too much info on these, but the big questions I can't seem to find are approx. how old the gun is and what a reasonable value is for it...here are the specs.:

• Winchester 1400 Ranger (Serial No. N1129xxx)
•12 ga. 2 3/4" Chamber
•28" Vent Rib Barrel (WinChoke)
•Blued Barrel & Receiver
•Checkered Walnut Stock/Forend
•Complete with OEM Imp., Mod, Full WinChokes (knurled that extend <1/4" out of barrel with a tube wrench that looks like Win OEM) and 1 aftermarket flush fit Skeet Choke (no labeling/mfg)
•Overall 98% Condition with only minor handling marks.

Thanks for any assistance you all might be able to offer.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Sat Mar 12, 2011 9:44 pm 
Tournament Grade

Joined: Sat Mar 12, 2011 7:55 pm
Posts: 200
Location: Taxifornistan
Please date my Winchester 1300 pg Defender. Serial # L1815890

Thanks

_________________
Lead - Copper - Brass ...the new precious metals. Invest wisely.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Mon Mar 21, 2011 1:45 am 
Utility Grade
User avatar

Joined: Sun Mar 20, 2011 11:44 pm
Posts: 9
Location: East Tennessee
Looking for the date of production of my Winchester 1300 Defender. Composite stock/foream, 18" barrel, 7+1, serial number L35245xx.

_________________
NRA Benefactor Life Member
Μολὼν λαβέ


Last edited by 10P8TRIOT on Fri Dec 30, 2011 4:09 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Mon May 02, 2011 8:33 pm 
Field Grade

Joined: Fri Apr 16, 2010 3:46 pm
Posts: 52
Just bought my first SX1. Ser# m74707. When was it made?


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Wed May 11, 2011 8:12 am 
Utility Grade

Joined: Tue May 10, 2011 9:39 pm
Posts: 1
I just got a Winchester shotgun from my father in law. It appears to be a 1897 model with a 28-30 inch barrel. It is marked with a "12 F" o the barrel which I assume means 12 gauge, full choke. Wood appears to be walnut in very good condition with no checkering and it does have a rounded semi pistol grip. Serial # is 71984 with C over the 9 in the number. I am in the dark about these guns and would like an estimated value and date of manufacture for insurance purposes.
Thanks for your help.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Thu May 26, 2011 8:37 pm 
Tournament Grade

Joined: Wed Nov 04, 2009 8:46 pm
Posts: 280
Do you have dates for Model 97s? A friend just found one in her closet and has no idea how it got there. It has nice wood, and an English grip. I can get serial number.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Fri Jul 29, 2011 12:52 am 
Field Grade
User avatar

Joined: Tue Jul 12, 2011 1:29 pm
Posts: 80
Location: Beirut
Winchester 6500 trap, 30 inch barrels, chokes F, XF, adjustable comb s/n K544407E


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Fri Oct 28, 2011 12:18 pm 
Tournament Grade

Joined: Mon Jul 12, 2004 4:22 pm
Posts: 167
Location: Willamette Valley, Oregon
Winchester model 12 20 gauge. #430xxx. full choke, 26?" barrel

Winchester Model 12 20 gauge #MT0681 Imp. cyl.


Top
 Profile  
 
 Post subject: Re: If you want to know Value and date of mfg
PostPosted: Mon Dec 05, 2011 9:17 pm 
Utility Grade
User avatar

Joined: Mon Dec 05, 2011 10:34 am
Posts: 10
md_beatt wrote:
Value and/or date of mfg help us help you, will need:
Model #, barrel(s) length, choke(s), plain, solid rib, vent rib, stlye of stocks, plain walnut, checkered, to date it will need the S/N like this 654xxx or 1566xxx you get the idea.
Note: dating a Post 64 gun is not as easy as the pre 64 guns. Not much has been published.
Regards Dave


I have a model 1200 in 12ga with an 18" barrel. Barrel says modified but a hunch tells me the barrel was cut down. Plain barrel, walnut with full checkering and Ser. # 1714189



_________________
My job is to give my kids things to discuss with their therapist


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 81 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: aabradley82, Bing [Bot], BobK, BrainAdamson75, Browning90va, Ches, CLuttrell, dcblvsh2, dpe2002, Google [Bot], Google Adsense [Bot], Google Feedfetcher, Herb S., hopper810, jaguarxk120, Jason Johnson, jerneedog, Jim Miller, JST, Kannoncocker, Klaus81, kxrider235, Lefty Wilson, mactownbob, Majestic-12 [Bot], MSNbot Media, mtchamber, Nsiro, painter*, Saltydog055, SDV, vern faulkner, Virginian, Winchester 1912, Woody, xglide06


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice