want to ditch the dull silver bead on my new 870,do it just unscrew or what?looking for something brighter,polishing didn't help at all.It's mounted on a low base.thanks!!
I think Express models are just pressed in. Grab it with a pair of pliers and yank it out. Wingmasters and the other nicer finished guns are threaded in. I think if you look close, you'll see a small hex or flats to grip it by and unscrew it. Maybe ask the guys in the Gunsmithing forum to be sure. A couple of them know what they are talking about. Mention if its an Express, Wingmaster, etc.
My 870 Express was press-fit. It had to be cut off, drilled out and tapped for a screw-in Truglo. It's not an easy job because you can drill through the barrel and marr the rib up if you're not careful. If you have the 870 Express I recommend taking it to a competent gunsmith for this work.
The problem with truglo and any sight for the remington 870 is the pillar....no matter what if you replace the bead ( except for the XS) you are going to have to drill and tap...making it a bear to do on your own unless you have the proper tools.
Yup, my local gun shop sells the little jars of sight paint. There's a glow in the dark paint, as well.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Shotgun Forum
4.3M posts
143.1K members
Since 2000
A forum community dedicated to Shotgun owners and enthusiasts including the Remington, Beretta, and Mossberg shotguns brands. Come join the discussion about optics, hunting, gunsmithing, styles, reviews, accessories, classifieds, and more!