ShotGunWorld Shotguns

It is currently Thu Dec 03, 2020 2:31 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: MEC .410 parts
PostPosted: Sat Jun 20, 2020 3:14 pm 
Presentation Grade

Joined: Tue Sep 21, 2004 3:19 pm
Posts: 791
Location: near Dallas
1x 50212 charge bar
2x 453P410 wad fingers
3x 20520 drop tubes 1 metal, 2 plastic
3x 721CA410 cam crimp assemblies
1x 8543 shell stripper for a single stage
Charge bar is used remainder are new.
$ 48.00 shipped
Image




Last edited by leftex on Sun Jun 21, 2020 10:52 am, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: MEC .410 parts
PostPosted: Sat Jun 20, 2020 4:44 pm 
Diamond Grade
User avatar

Joined: Sun Jun 24, 2018 2:51 pm
Posts: 1843
Location: S.E. Wisconsin
The "1x mystery part" is a shell stripper for a single stage. You lift the re-primer "cup" up a little and slide it under, strips the hull from the re-prime post.

Steve

_________________
The More Times You Pull The Trigger The More Fun You Are Having.
I repair MEC presses. PM me.
Used to be Steve Y


Top
 Profile  
 
 Post subject: Re: MEC .410 parts
PostPosted: Sat Jun 20, 2020 4:53 pm 
Presentation Grade

Joined: Tue Sep 21, 2004 3:19 pm
Posts: 791
Location: near Dallas
Thanks Steve, I knew what it was for but couldn't find a part number.


Top
 Profile  
 
 Post subject: Re: MEC .410 parts
PostPosted: Wed Oct 28, 2020 11:17 am 
Presentation Grade

Joined: Tue Sep 21, 2004 3:19 pm
Posts: 791
Location: near Dallas
^^


Top
 Profile  
 
 Post subject: Re: MEC .410 parts
PostPosted: Thu Oct 29, 2020 7:30 pm 
Shooting Instructor
Shooting Instructor

Joined: Wed Apr 14, 2004 12:11 pm
Posts: 3547
Location: Afton, VA
YevetS wrote:
The "1x mystery part" is a shell stripper for a single stage. You lift the re-primer "cup" up a little and slide it under, strips the hull from the re-prime post.

Steve


Actually the lower edge of the stripper goes beneath the frame, otherwise a stuck hull would simply lift the primer cup too.

_________________
Doubled Distinguished
NRA Benefactor Member
NSSA Life Member
NAHC Life Member
VA State Shooting Association Life Member
NSSA Referee
NSSA Level I Instructor


Top
 Profile  
 
 Post subject: Re: MEC .410 parts
PostPosted: Thu Oct 29, 2020 8:11 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon Jul 20, 2009 1:54 pm
Posts: 11457
Location: Kansas
I use one on my Sizemaster. You are supposed to slip it in over the primer seater station. Trouble is that it makes it a little difficult to insert and remove a hull with it installed. When I get a stuck hull I just slip it over the hull without installing it and then raise the handle and the hull comes free from the ram. Remingtons are the worst, next are Winchester’s and never had a Federal hull stick, but they have other problems. It’s a handy gadget



_________________
"We pulled the trigger, the safety went forward, both barrels fired almost together, the gun opened, ejectors kicked the fired cases over our shoulder ...the most completely automatic gun we ever fired" Elmer Keith- Shotguns by Keith


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: Bing [Bot], DavidRamey, Doc090107, Google [Bot], Google Adsense [Bot], Majestic-12 [Bot], misterdom, Steeler [Crawler], Supertex1978, T-Pee, Tommyskeet


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice