CalendarCalendar   Photos  * FAQ
It is currently Fri Oct 31, 2014 8:55 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: 3 inch UNPRIMED 12 gauge hulls
PostPosted: Tue Jan 18, 2011 11:38 am 
Clays Expert
Clays Expert

Joined: Mon Oct 11, 2010 4:24 pm
Posts: 16
Would anyone know a source for 3 inch UNPRIMED 12 gauge hulls for roll crimping ? The few sources I have tapped offer only primed hulls, and it is difficult to get these for International shipments.

Thanks




Top
 Profile  
 
 Post subject: Re: 3 inch UNPRIMED 12 gauge hulls
PostPosted: Tue Jan 18, 2011 1:08 pm 
Diamond Grade

Joined: Mon Nov 03, 2008 9:38 am
Posts: 1259
Location: Iselin, N J
Search for BPI and then look for un primed 3 inch hulls.
Ajay Madan
www.PreciousVideoMemories.com


Top
 Profile  
 
 Post subject: Re: 3 inch UNPRIMED 12 gauge hulls
PostPosted: Tue Jan 18, 2011 1:19 pm 
Diamond Grade

Joined: Mon Nov 03, 2008 9:38 am
Posts: 1259
Location: Iselin, N J
Here is a quick link to un primed 2 3/4 hulls
http://www.ballisticproducts.com/Cheddi ... 1391225UP/
I did not see any 3 inch un primed hulls.
Ajay Madan
www.PreciousVideoMemories.com


Top
 Profile  
 
 Post subject: Re: 3 inch UNPRIMED 12 gauge hulls
PostPosted: Wed Jan 19, 2011 12:18 am 
Clays Expert
Clays Expert

Joined: Mon Oct 11, 2010 4:24 pm
Posts: 16
Thank you, Ajay. I am in touch with BPI, but they cannot offer any 3 inch unprimed 12 gauge hulls.

I have to find some other source.

Thanks again.


Top
 Profile  
 
 Post subject: Re: 3 inch UNPRIMED 12 gauge hulls
PostPosted: Wed Jan 19, 2011 8:50 am 
Field Grade

Joined: Thu Dec 23, 2010 8:08 am
Posts: 99
I haven't seen any unprimed Multi-Ched hulls available. Been looking at these hulls because I have 100 12 ga. 3 in. that I've been looking for a buckshot load for them.

I assume that your out of the U.S.A. if you can't get primed hulls delivered.

I read that Cheddites are manufactured in France. Maybe you can look them up and go right to the source for unprimed hulls.

If your desperate and have money I could shoot out the primers on mine and send them to you. :)




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 230rn, 242Napa, 66L, 737pilot2004, Afzaal, barndg00, bgouker, Bing [Bot], BOB_HARWELL, bravastar1, Brian Johnson, bulabula, casonet, CCskeetr, chowellacsbd, crucker, CSDC, dc73nova, Evan1996, flop2river, Google [Bot], Google Adsense [Bot], Google Feedfetcher, grade6man, green chile*, hlj3, HogRider357, HymieP, Irish1969, Jager1, jeepin_85, jharrington, jmshunts, JNW, Joe Hunter, JonnyRocket, kjs, mcdlogs, mpolans, neohio25, NJCowles, njsfirearms, openspaces, oregunner, pedro bernal, PJDiesel, quail-chaser, Randy S, rebcussion, rfedele, rich franzer, RudyN, Sandor27, savageman101, Scout Master 54, shellback, SmoothboreHunter, snuf, sszz4, StevenZ, Thatguy6891, tradewinds, Trapperjohn01, Vette Jockey, Will Fennell, Woodson, wyobirds, wyvern65, Yahoo [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group     -  DMCA Notice