CalendarCalendar   Photos  * FAQ
It is currently Fri Nov 28, 2014 1:54 am

All times are UTC - 6 hours [ DST ]


Image



Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Remington 870 18 and bayonet
PostPosted: Sat Aug 20, 2011 10:09 pm 
Utility Grade

Joined: Sat Aug 20, 2011 9:45 pm
Posts: 7
I have Remington 870 18 inches. I want buy NATO bayonet. I know i need magazine enlarger and bayonet lug. I have heat shild on my barrel and i think i must remove it before bayonet because heat shild ang lug is in same place.

?Is it right? ?How i might make work common?

Image




Last edited by PabloES on Thu Apr 12, 2012 12:41 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Sun Aug 21, 2011 1:00 pm 
Field Grade
User avatar

Joined: Fri Aug 12, 2011 9:17 am
Posts: 40
Curosity got to me as why do you want a bayonet on a shotgun??


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Sun Aug 21, 2011 1:33 pm 
Utility Grade

Joined: Sat Aug 20, 2011 9:45 pm
Posts: 7
I think it is cool


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Mon Aug 22, 2011 3:25 pm 
Field Grade

Joined: Thu Jul 29, 2010 5:48 pm
Posts: 78
Been playing many video games lately. Bayonet - LOL....


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Mon Aug 22, 2011 4:18 pm 
Field Grade

Joined: Tue Dec 30, 2008 11:29 pm
Posts: 72
Location: NJ/PA
No two ways about it, without laborious modification to the current mag-extension you'll have to buy one made specifically for acceptance of a bayonet.

Most of the time, the lug-clamp is sold as a kit which includes the tube, so you're better off just picking up the new parts.

You also might have to dump the heatshield. I know a lot of people think they look cool, but it doesn't do much accept make it harder to take apart the gun to clean it.


As for WHY anyone wants a bayonet on a shotgun, who cares? IMHO, "Because I can!" is more than enough reason to personalize a gun as one sees fit.
There's plenty of sillier, more gimmicky gun accessories to complain about. Like the Picatinny bottle-opener. :P


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Wed Aug 24, 2011 12:20 am 
Utility Grade

Joined: Sat Aug 20, 2011 9:45 pm
Posts: 7
I know fastening method. I want know how make work common bayonet and heat shild in 18 inches Remington.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Wed Aug 24, 2011 6:15 am 
Field Grade

Joined: Tue Dec 30, 2008 11:29 pm
Posts: 72
Location: NJ/PA
PabloES wrote:
I know fastening method. I want know how make work common bayonet and heat shild in 18 inches Remington.



Sorry, buddy, but I've got NO idea what you're trying to say.

If you're asking how to make the heatshield AND bayonet fit at the same time, well they just might not work together. Period.

Sometimes you can't have everything. Pick the ONE pointless accessory you'd like more. :P


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Wed Aug 24, 2011 6:17 pm 
Tournament Grade

Joined: Sat Mar 12, 2011 7:55 pm
Posts: 199
Location: Taxifornistan
Use all your skills, ingenuity (and $$$) to make this fit:

http://www.gunpartscorp.com/catalog/Det ... 20&catid=0

_________________
Lead - Copper - Brass ...the new precious metals. Invest wisely.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Wed Aug 24, 2011 10:48 pm 
Utility Grade

Joined: Sat Aug 20, 2011 9:45 pm
Posts: 7
It is for long Winchester.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Wed Aug 24, 2011 11:16 pm 
Field Grade

Joined: Sat Apr 05, 2008 2:43 am
Posts: 74
BadBoyBeeson has the part you need. PM him.

Not cheap.

http://sjhardware.com/store/modules.php ... th=107_122

http://sjhardware.com/store/modules.php ... th=107_121


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Wed Aug 24, 2011 11:42 pm 
Tournament Grade

Joined: Sat Mar 12, 2011 7:55 pm
Posts: 199
Location: Taxifornistan
PabloES wrote:
It is for long Winchester.


The Win 97 had a 5 round mag and an 18" barrel. Its my understanding that the Numrich is a replica of that bayo mount/heat shield.

_________________
Lead - Copper - Brass ...the new precious metals. Invest wisely.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Thu Aug 25, 2011 4:47 am 
Crown Grade
User avatar

Joined: Fri Oct 21, 2005 11:06 pm
Posts: 4701
Location: The Lost State of Franklin
RacknRoll wrote:
PabloES wrote:
It is for long Winchester.


The Win 97 had a 5 round mag and an 18" barrel. Its my understanding that the Numrich is a replica of that bayo mount/heat shield.


The Winchester 97 Trench gun has a 20 inch barrel. A Winchester trench gun bayonet adapter and heat shield can be fitted to the 870, but the barrel will require a straight section turned for the adapter to fit. I'm not sure if a spacer sleeve would be needed or not. I don't remember what the od of the M97 barrel is.The bayonet that fits it is the M1917 and is a little on the expensive side.

The easiest way is to find a Remington magazine extension that has the end made for a bayonet and use the adapter that BadBoyBeeson sells. I have a modified one on my 1300 Winchester and it work fine

as posted above

http://sjhardware.com/store/modules.php ... th=107_121

or the complete kit

http://sjhardware.com/store/modules.php ... th=107_122

_________________
Weather forecast for tonight: dark.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Thu Aug 25, 2011 6:54 am 
Utility Grade

Joined: Sat Aug 20, 2011 9:45 pm
Posts: 7
I have Rem 870 18 inches and heat shild and +3 enlarger. I can buy NATO bayonet like on foto and +2 or +3 enlarger for bayonet from this internet shop.
+3 and heatshild and bayonet fix OK. But I don't want long enlarger
+2 and heatshild and bayonet fix in common place and interference. But +2 is good enlarger.
I try make common work bayonet and heatshild in +2 enlarger.

Sorry for my english.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Thu Aug 25, 2011 6:56 am 
Utility Grade

Joined: Sat Aug 20, 2011 9:45 pm
Posts: 7
I see another bayonet lug but it is impossible find it not in USA.

Image
Image


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Thu Aug 25, 2011 11:54 am 
Tournament Grade

Joined: Sat Mar 12, 2011 7:55 pm
Posts: 199
Location: Taxifornistan
Banshee, I used http://www.olive-drab.com/od_other_fire ... un_m97.php (under description) as a refrence to the 18" barrel length. That source is evidently incorrect.

_________________
Lead - Copper - Brass ...the new precious metals. Invest wisely.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Thu Aug 25, 2011 3:29 pm 
Crown Grade
User avatar

Joined: Fri Oct 21, 2005 11:06 pm
Posts: 4701
Location: The Lost State of Franklin
RacknRoll wrote:
Banshee, I used http://www.olive-drab.com/od_other_fire ... un_m97.php (under description) as a refrence to the 18" barrel length. That source is evidently incorrect.


Olive-Drab.com is a good site, odd they missed that.

This is from the Winchester collectors, plus I have owned a couple.

http://www.winchestercollector.org/guns/1897shot.shtml

_________________
Weather forecast for tonight: dark.


Top
 Profile  
 
 Post subject: Re: Remington 870 18 and bayonet
PostPosted: Thu Sep 01, 2011 11:34 am 
Field Grade

Joined: Fri Oct 14, 2005 3:32 pm
Posts: 76
Location: Chandler, AZ
[quote="PabloES"]I see another bayonet lug but it is impossible find it not in USA.
[quote]

That is a US Marine Corps bayonet mount. It is difficult to find as well as expensive ($250-350). I have the US Air Force version which has a bead sight instead of rifle sights. I was lucky and found a guy selling 2 of them. I sold off one and kept the one pictured below. A guy did ask me for detailed pictures as he was thinking of manufacturing a clone, but I never heard back.

Image

Image




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 16penny, AdsBot [Google], bahlzar, bigjedd, Bing [Bot], Boehler, bthunter019, DallasCMT, FORFUN, Golfswithwolves, Google [Bot], Google Adsense [Bot], HMM36319, John H, Majestic-12 [Bot], Plain, slohuntr, wjonessc


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group     -  DMCA Notice