CalendarCalendar   Photos  * FAQ
It is currently Sat Sep 20, 2014 11:04 pm

All times are UTC - 6 hours [ DST ]


Image



Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Benelli SN pistol grip
PostPosted: Tue Jan 08, 2013 1:56 pm 
Utility Grade
User avatar

Joined: Thu Sep 16, 2010 2:37 pm
Posts: 15
Location: Greece
So im trying to find a way to add a pistol grip in my supernova,
i know this modifications its not very easy when we talk for benellis..
Anyway have anybody add something like this?any ideas for how we do it?
Image

_________________
Image


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Fri Jan 11, 2013 2:59 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Wed Nov 26, 2008 11:44 pm
Posts: 2011
Location: It is the tradition that a Kentuckian never runs. He does not have to. (1931)
Image

What you need is the Benelli Supernova Tactical Collapsible Stock. I think that the stock number might be 61171. These collapsible stocks are so rare that I could not find a single one for you. Try to work with:
M.G. KIRGIAS S.A.
1ST ON THE ROAD OF NEOCHOROUDA 54500 NEOCHORUDA - THESSALONIKI Grecia
Tel: 0030.2310 78 40 83
Fax: 0030.2310 78 42 06
mgkirgias@hol.gr

I understood you to be requesting how to obtain a pistol grip only for the SuperNova. First you will remove the buttstock from the Collapsible Stock assembly. Press the lock button and move the stock back as far out as it will go. Then press the lock button using more force to remove the stock completely.

Image

The pistol grip screws onto the threads of the SuperNova adjustment rod at the receiver. You will only neeed to fabricate a short bolt to match the receiver end of the SuperNova adjustment rod.

Image

If you cannot order from Benelli Italy or M. G. Kirgias, you may need to call BenelliUSA at 1-800-264-4962 and order the Benelli Supernova Tactical Collapsible Stock (stock number might be 61171). The component assemblies are Benelli assembly 265S (the buttstock), assembly 166S (the adjustment rod), and assembly 117S (the grip). Good luck, sir.

Image

_________________
Pistol Grip Only - PGO Shotgun Technique
2 Mossberg 835's, a 7+1 Mossberg 500, & a Mossberg 500 Cruiser


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Fri Jan 11, 2013 4:34 am 
Tournament Grade

Joined: Thu Mar 17, 2011 3:31 am
Posts: 244
Location: Carolina
Assuming the SuperNova uses the same stock tube as the M1-M4 models, I think the part you need is the M3 folding stock adapter bolt.

On the standard stock tubes (which are also used as a recoil spring housing on some models), one end threads into the receiver and one end has a bolt for the stock (on the M4 this end has a threaded bushing and the bolt is in the stock).

Now imagine cutting the stock tube down to 1/2" length, leaving nothing but the receiver threads and then remounting the stock bolt directly into this.
What you now have is the M3/M4 folding stock adapter.
This:

Image

Benelli calls it the folding stock grip frame retaining bolt.....
Brownell's calls it the folding stock mounting stud.
whatever you call it, it's part number 116F in the following picture.

Image


Numrich use to sell them for about $15 bucks I think?

Again, all this assumes the SuperNova uses the same tube and thread pattern as the M1 through M4 models, which seems a reasonable assumption.


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Fri Jan 11, 2013 10:04 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Wed Nov 26, 2008 11:44 pm
Posts: 2011
Location: It is the tradition that a Kentuckian never runs. He does not have to. (1931)
Very good, Biohazard. Then bloody could try to order assembly 117S (the pistol grip only) and 116F (Benelli's folding stock grip frame retaining bolt, also known as Brownell's folding stock mounting stud). Buy the Benelli folding stock mounting stud from Brownell's, $13.99, here.

_________________
Pistol Grip Only - PGO Shotgun Technique
2 Mossberg 835's, a 7+1 Mossberg 500, & a Mossberg 500 Cruiser


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Tue Aug 06, 2013 9:12 pm 
Field Grade

Joined: Mon Nov 06, 2006 11:24 pm
Posts: 26
This is a pretty awesome and detailed explanation of the benelli collapsible stock setup. Does anyone know whether any manufacturers are making a "benelli style" collapsible stock setup for the Remington 870?

I really love Benelli autos but I'm loyal to 870s when it comes to pumps.


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Sat Apr 26, 2014 9:47 am 
Utility Grade
User avatar

Joined: Thu Sep 16, 2010 2:37 pm
Posts: 15
Location: Greece
I buy the pistol grip,with the folding stock adapter like the first pic,everything's done.
Anyway now I have find brand new collapsible stock about 200$,I think I ll buy it soon.
But there's one thing,the recoil tube in my supernova doesn't have the adjustments notches like the tube of the m4.it's a single tube without any pitch up.
I have to buy the tube from the m4,I'm in search.

_________________
Image


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Sat Apr 26, 2014 3:22 pm 
Limited Edition
User avatar

Joined: Tue Mar 12, 2013 6:20 pm
Posts: 312
Location: California
It doesn't work like that bloody, the M4 and supernova are different tubes.

_________________
M1 Super 90 / M3 Super 90 / M1014 / Supernova / Prestige / SAS-12 / M2 / M3T


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Sun Apr 27, 2014 7:43 am 
Utility Grade
User avatar

Joined: Thu Sep 16, 2010 2:37 pm
Posts: 15
Location: Greece
Vertigofirearms wrote:
It doesn't work like that bloody, the M4 and supernova are different tubes.


Didn't knew that,anyway thank you,I ask for custom tube and it's cheap,about 20€,with the notches I want,but I'm not sure if I really want to put the collapsible stock.the m4 and the sn tactical have the same tube?I ask cause my sn it's not the edition with the ghost rings sights.
Maybe it's time to buy m4 :)

_________________
Image


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Sun Apr 27, 2014 11:39 am 
Limited Edition
User avatar

Joined: Tue Mar 12, 2013 6:20 pm
Posts: 312
Location: California
Image
Image

Now all Benelli Shotguns use M21 X 1 - 6g THREADS, I made my own stud to make a short Supernova or M3. I just have not got around to removing it yet.

_________________
M1 Super 90 / M3 Super 90 / M1014 / Supernova / Prestige / SAS-12 / M2 / M3T


Top
 Profile  
 
 Post subject: Re: Απ: Benelli SN pistol grip
PostPosted: Sun May 25, 2014 7:03 am 
Utility Grade

Joined: Tue May 21, 2013 2:32 am
Posts: 19
Location: Athens Greece
bloody wrote:
Vertigofirearms wrote:
It doesn't work like that bloody, the M4 and supernova are different tubes.


Didn't knew that,anyway thank you,I ask for custom tube and it's cheap,about 20€,with the notches I want,but I'm not sure if I really want to put the collapsible stock.the m4 and the sn tactical have the same tube?I ask cause my sn it's not the edition with the ghost rings sights.
Maybe it's time to buy m4 :)


Collapsible stock is illegal in Greece ....
You have to be careful


Top
 Profile  
 
 Post subject: Re: Απ: Benelli SN pistol grip
PostPosted: Wed May 28, 2014 2:57 pm 
Utility Grade
User avatar

Joined: Thu Sep 16, 2010 2:37 pm
Posts: 15
Location: Greece
denick wrote:
bloody wrote:
Vertigofirearms wrote:
It doesn't work like that bloody, the M4 and supernova are different tubes.


Didn't knew that,anyway thank you,I ask for custom tube and it's cheap,about 20€,with the notches I want,but I'm not sure if I really want to put the collapsible stock.the m4 and the sn tactical have the same tube?I ask cause my sn it's not the edition with the ghost rings sights.
Maybe it's time to buy m4 :)


Collapsible stock is illegal in Greece ....
You have to be careful


I know my friend.. ^o^ Anyway I put of the pistol grip and for now,I'm on factory buttstock

_________________
Image


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Sun Aug 17, 2014 11:22 am 
Utility Grade

Joined: Sat Aug 16, 2014 4:55 pm
Posts: 9
I fit the benelli m4 collapsible stock to my supernova tactical. I'll post pictures once I'm able to.

Image


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Tue Aug 19, 2014 8:34 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Wed Nov 26, 2008 11:44 pm
Posts: 2011
Location: It is the tradition that a Kentuckian never runs. He does not have to. (1931)
I think that is a combination that I will not forget very soon: a $375 stock on a $450 shotgun.

:mrgreen:

_________________
Pistol Grip Only - PGO Shotgun Technique
2 Mossberg 835's, a 7+1 Mossberg 500, & a Mossberg 500 Cruiser


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Wed Aug 20, 2014 12:51 pm 
Utility Grade

Joined: Sat Aug 16, 2014 4:55 pm
Posts: 9
I tried every other stock out there and I just wasnt happy with the look and feel. Then I decide that I was going to put a m1014 stock on, I don't like the look of the factory supernova c-stock. I've always loved and dreamed about the m4 but I wanted to shoot 3.5in shells and I'd just rather have a pump, semi autos are cool just not my thing(yet). I put a custom lop notch so it fits me perfect. I couldn't be happier with my setup.


Top
 Profile  
 
 Post subject: Re: Benelli SN pistol grip
PostPosted: Thu Aug 21, 2014 12:44 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Wed Nov 26, 2008 11:44 pm
Posts: 2011
Location: It is the tradition that a Kentuckian never runs. He does not have to. (1931)
Makes perfect sense. You have a very nice shotgun, sir. Good luck.

_________________
Pistol Grip Only - PGO Shotgun Technique
2 Mossberg 835's, a 7+1 Mossberg 500, & a Mossberg 500 Cruiser


Top
 Profile  
 
 Post subject: Re: Απ: Benelli SN pistol grip
PostPosted: Sun Aug 24, 2014 2:39 am 
Utility Grade

Joined: Tue May 21, 2013 2:32 am
Posts: 19
Location: Athens Greece
Are these rails under the forend ?


Top
 Profile  
 
 Post subject: Re: Απ: Benelli SN pistol grip
PostPosted: Sun Aug 24, 2014 12:14 pm 
Utility Grade

Joined: Sat Aug 16, 2014 4:55 pm
Posts: 9
denick wrote:
Are these rails under the forend ?


If your asking me, yes installed rails on my forend on my supernova for a hand stop and a flash light.
I bought magpul moe rails, measured the thickness of the forend where the rails were going and milled those areas flat, then taper ground the rail to get the correct angle and to have them mount as close to the forend as possible .


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 4tenman, Baron23, benellishooter3, Bing [Bot], Bob_79, Bubzola, budrock56, Curly-Nohair, DallasCMT, dbuffington, doran4x, Glenn Kelley, goldduster, GoldGuy, Google [Bot], Google Adsense [Bot], Google Feedfetcher, gthudspeth, Hunt24x7, Jager1, Jaspo01, jbrentd, jtwtucson47, kateskeet, kgpcr, KRIEGHOFFK80, Maser, MASTERBLASTER 1, Mike in Reedley, mikeydio, mwpslp, Odie-wan, oregunner, Panhead57, pitted bore, quail-chaser, QuarterChoke, RacknRoll, ranch23, RAR71, roknjs, SCOOTR425, seaark18, Shootin25, Skeet_Man, StormRhydr, SuperXOne, tonyclark, Vette Jockey, Wing_Shoot, Yahoo [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group     -  DMCA Notice