CalendarCalendar   Photos  * FAQ
It is currently Sat Aug 30, 2014 5:11 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Benelli Combs
PostPosted: Wed Aug 21, 2013 3:23 pm 
Limited Edition
User avatar

Joined: Mon Aug 14, 2006 11:31 am
Posts: 401
Location: Missouri
So I have a SBE II right now and I really like it except the comb is still low to me. When I put my head on the stock I can only see the top quarter of the front bead. I know benelli makes differant height combs and I was wondering if anyone has any experiance with them. How drastically do they change fit and POI? are they hard to install? Thanks for the info {hs#

_________________
Image


Top
 Profile  
 
 Post subject: Re: Benelli Combs
PostPosted: Wed Aug 21, 2013 3:54 pm 
Crown Grade

Joined: Mon Oct 31, 2005 9:22 am
Posts: 2982
Location: East Mountains, NM
They work pretty well and don't raise your head overly much. Not hard to install but can be hard to find sometimes.


Top
 Profile  
 
 Post subject: Re: Benelli Combs
PostPosted: Wed Aug 21, 2013 4:00 pm 
Crown Grade

Joined: Fri Apr 22, 2011 10:46 am
Posts: 2438
They make a much higher one that pops into place.
I had the same problem.
It will be plenty high. You may need to adj the shims to get it dialed in correctly.
I sold my SBE II with the raised comb since I could not find the original.
I found it a few years later.


Top
 Profile  
 
 Post subject: Re: Benelli Combs
PostPosted: Thu Aug 22, 2013 4:38 pm 
Limited Edition
User avatar

Joined: Mon Aug 14, 2006 11:31 am
Posts: 401
Location: Missouri
Does anyone know the highest setting on the comfortech stock. I think I have it set at the highest but I lost my manual.

_________________
Image


Top
 Profile  
 
 Post subject: Re: Benelli Combs
PostPosted: Thu Aug 22, 2013 10:51 pm 
Field Grade

Joined: Thu Jul 22, 2010 11:09 pm
Posts: 66
Location: PA
There 3 heights. The highest is for use with a scope or rifle sights. The mid size is about the height of a trap gun's comb.

I'll check my manual and you tell which shims will raise the stock.


Top
 Profile  
 
 Post subject: Re: Benelli Combs
PostPosted: Fri Aug 23, 2013 5:03 am 
Crown Grade
User avatar

Joined: Thu Nov 09, 2006 1:46 pm
Posts: 8362
Location: New York
FWP wrote:
There 3 heights. The highest is for use with a scope or rifle sights. The mid size is about the height of a trap gun's comb.

I'll check my manual and you tell which shims will raise the stock.


I can agree with adjusting the stock with the shims to see if it works. The mid size comb pad is not just for Trap shooting. It makes the stock have a parallel fit. Some sporting clays shooter like lt. Look at the Benelli SS performance shop gun. You will see it.
Image

_________________
NRA Life Member


Top
 Profile  
 
 Post subject: Re: Benelli Combs
PostPosted: Fri Aug 23, 2013 8:25 am 
Field Grade

Joined: Tue Dec 11, 2012 11:25 am
Posts: 85
Its the most expensive piece of rubber you will ever buy. But they do work.


Top
 Profile  
 
 Post subject: Re: Benelli Combs
PostPosted: Fri Aug 23, 2013 8:43 am 
Tournament Grade

Joined: Sat Oct 08, 2011 6:21 pm
Posts: 151
Location: Long Island NY
Have a medium height one on my SS. It is a little difficult to install but works as advertised. I shoot trap and sporting with it and like it. And yes at $100 it is an expensive piece of rubber.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: Archametes, AUTIGER85, bigalt, Bing [Bot], Curly-Nohair, EdSy, Google [Bot], Google Adsense [Bot], Google Feedfetcher, haverodwilltravel, hopper810, hovbuild, Josh R, Old Shooter, pathdoc, quail-chaser, Raven2009, retiredreb, talbtimber, TBrzezicki, Yahoo [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group     -  DMCA Notice