It is currently Fri May 25, 2018 11:36 am

All times are UTC - 6 hours [ DST ]





Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Perazzi fixed chokes?
PostPosted: Fri Dec 01, 2017 1:32 pm 
Utility Grade

Joined: Sun Jul 12, 2015 6:24 pm
Posts: 11
Who would you trust to convert a fixed choke Perazzi into screw in chokes?




Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Fri Dec 01, 2017 1:56 pm 
Diamond Grade

Joined: Sun Sep 18, 2016 9:10 am
Posts: 1206
I recommend you add more to your post, specifically the yr, model of the P gun. Someone on the forum will likely have your answer and advise. I suspect someone will direct you to call Briley.

Good luck


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Fri Dec 01, 2017 2:20 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon Apr 15, 2013 9:40 am
Posts: 334
Location: Northern Virginia
Texas Yankee wrote:
I suspect someone will direct you to call Briley.


Yep, I'd call Briley. Have not used them for this specific task, but I've never been disappointed with any of the work they have done on my P-gun.


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Fri Dec 01, 2017 2:20 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon Apr 15, 2013 9:40 am
Posts: 334
Location: Northern Virginia
Texas Yankee wrote:
I suspect someone will direct you to call Briley.


Yep, I'd call Briley. Have not used them for this specific task, but I've never been disappointed with any of the work they have done on my P-gun.


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Fri Dec 01, 2017 2:27 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Thu Aug 20, 2009 8:20 am
Posts: 11691
Just so you'll know , BRILEY.

Many shooters order a Perazzi w/ fixed chokes , knowing in advance they want choke tubes but like the Briley version rather than the Perazzi version. This fixed choke bbls tend to be lighter.

Me--I like the Briley's due to their rounded threads and ease of putting in and taking out. By the same token , I have several Perazzi bbl sets w/ Perazzi factory choke tubes, which have an annoying tiny thread that requires a lot of twirling (yuck).

But it's only a minor point.

_________________
Nsca # 540300. Been loving this game since 01.

Our prentice Tom may now refuse
To wipe his scoundrel master's shoes
For now he's free to sing and play
O'er the hills and far away.


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Wed Dec 06, 2017 7:42 pm 
Tournament Grade
User avatar

Joined: Tue Jan 22, 2013 8:11 pm
Posts: 179
Location: Shreveport, LA
wilkinson. i enjoy mine.

_________________
Angle Port 391
Perazzi MX2000/8


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Mon Jan 15, 2018 10:03 pm 
Diamond Grade

Joined: Fri Mar 19, 2004 9:07 pm
Posts: 1910
dillonhart wrote:
wilkinson. i enjoy mine.


Dillion knows and so does the ole bad self - Wilkinson.


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Thu Jan 18, 2018 7:51 am 
Limited Edition

Joined: Sun Nov 04, 2012 6:59 pm
Posts: 374
Best I ever saw were Teagues, made and installed in England. Westley Richards now owns Teague, and for awhile Westley Richards USA had plans to send barrel sets from their USA office to get this done for US customers. That was before their move to Florida from Montana, and have no further info.

The quality of these chokes and installation was simply amazing.


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Thu Jan 18, 2018 8:11 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon Jul 20, 2009 1:54 pm
Posts: 8146
Location: Kansas
I have a set of Teagues that we’re fitted to my ASE 90 Trap barrel. I agree. The quality is amazing. The tubes are serial numbered to the gun. Test pattern results were furnished with each tube. Mine are probably 20 years old.

_________________
"We pulled the trigger, the safety went forward, both barrels fired almost together, the gun opened, ejectors kicked the fired cases over our shoulder ...the most completely automatic gun we ever fired" Elmer Keith- Shotguns by Keith


Top
 Profile  
 
 Post subject: Perazzi fixed chokes?
PostPosted: Mon May 14, 2018 8:51 pm 
Diamond Grade
User avatar

Joined: Tue Mar 08, 2011 6:29 pm
Posts: 1444
Location: Georgia
My experience has been that Perazzi fixed choke barrels (done by the factory) tend to pattern well and don’t add weight to the tip of the barrel. The best screw chokes I ever had installed were the long flush ones done by Tom Wilkinson in N. C. Expensive but pattern great! The Teagues, from England are also good but a big hassle to send barrels to them and then back again. For me, a Sporting Clay - FITASC shooter, I like the Perazzi fixed chokes.

_________________
Shoot All U Can, Life is Short


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Thu May 17, 2018 12:03 pm 
Limited Edition

Joined: Sun Feb 04, 2007 11:49 am
Posts: 423
If you have plent of money or going to keep the gun forever wilkinson otherwise briley.


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Thu May 17, 2018 3:38 pm 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 5966
Location: Colorado Springs, Co
I had Briley do mine.
100% satisfied!


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Fri May 18, 2018 10:22 pm 
Tournament Grade

Joined: Sat Nov 30, 2013 8:21 pm
Posts: 217
I trusted Briley to do mine, and they came out fine. That said, I have Teague factory replacement chokes for my MT6 and they are excellent...the only chokes I've had (other than Briley) that don't need to be periodically tightened between stations.


Top
 Profile  
 
 Post subject: Re: Perazzi fixed chokes?
PostPosted: Tue May 22, 2018 2:00 pm 
Utility Grade
User avatar

Joined: Sat Jul 18, 2015 4:57 pm
Posts: 18
Location: CA 90266
The 4th generation Perazzi factory choke tubed O/U barrels are swaged at the muzzle. Only certain thin wall chokes can made to fit in fixed choke barrels.




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: Anatidae, Bing [Bot], bluebanana, brm, browning66, Chris Ferres, clayaddiction, crazyforbrownings, Curly N, David Spear, DeanRapp, Dr Duk, dubob, EricB, Eriehunter, floridaford, Google [Bot], Google Adsense [Bot], Google Feedfetcher, griner3, hopper810, ianb1116, Jim Miller, Keperkey, lossking, mactownbob, madtrapper143, Majestic-12 [Bot], mdlott, mortum, mugsy, Mule Driver, NMGuy, Northern Skies, ohio mike, Olympian Shooter, oregunner, papillonkirby, PhotoAaron, ppd1107, rcmbronc, rickeroo, rickstanley, Schlamoo, Schnurb, sera, sikocycles, simsy9, skeetsit, Smg3, Steve Y, stevenc1311, Streetie, two shoes, Vette Jockey, WOB, Yahoo [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© 2017 Carbon Media Group Outdoors    - DMCA Notice