CalendarCalendar   Photos  * FAQ
It is currently Fri Aug 22, 2014 2:51 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Springfield Model 67E .410 pump
PostPosted: Sun May 15, 2005 10:49 pm 
Utility Grade

Joined: Sat Mar 27, 2004 8:18 pm
Posts: 16
Location: Missouri
I found a Springfield model 67 E in .410 30 inch barrel 3 inch chamber. The guy was asking $300.00 but he told me he would take $285.00. I'm not familar with these guns but it sounded a little high to me . He said it was made in the 30s and it booked for around $450.00 . Does this guy know what he's talking about? I would appreciate some input. Thanks !


Top
 Profile  
 
 Post subject: Re: Springfield Model 67E .410 pump
PostPosted: Mon May 16, 2005 7:34 am 
ID & Value Expert
ID & Value Expert

Joined: Mon Aug 23, 2004 8:10 pm
Posts: 4830
I don't think it's that old and I know it doesn't book for $450. It's a $200 gun in top condition. Are you sure about the 30" barrel, never saw one that long.. Bushrod


Top
 Profile  
 
 Post subject: Re: Springfield Model 67E .410 pump
PostPosted: Mon May 16, 2005 12:07 pm 
ID & Value Expert
ID & Value Expert
User avatar

Joined: Sat Mar 06, 2004 10:16 am
Posts: 10514
I am not sure but I believe that the M67 was made from the early 1950s until 1989. They were all 3" chambered in .410,20 and 12 gauge. Even with a vent rib and choke tubes(both options), you would be paying too much at $285,in my opinion. Better off spending a bit more and buying a nice used BPS in .410 or the same and getting a Remington M870.

_________________
CAUTION: Things may appear closer in the rear view mirror!


Top
 Profile  
 
 Post subject: Re: Springfield Model 67E .410 pump
PostPosted: Mon May 16, 2005 7:40 pm 
Presentation Grade

Joined: Thu Jul 15, 2004 1:56 pm
Posts: 558
I can't believe the gun is worth what the seller is saying. I
think it should probably go for about $150. On the other hand,
it could be something very unique, and you might want to
pay a premium to get it under certain circumstances. The
circumstances being that you are wanting a heavy 410
for some reason to play with. Since the 67 is a steel gun
and if it has a 30 inch barrel it will have quite a bit more
heft than most 410s and this may appeal to you. If you
just happen to want an inexpensive 410 pump, though then
Walmart will sell you a new model 500 410 for about $250.


Top
 Profile  
 
 Post subject: Re: Springfield Model 67E .410 pump
PostPosted: Thu May 19, 2005 6:56 pm 
Utility Grade

Joined: Sat Mar 27, 2004 8:18 pm
Posts: 16
Location: Missouri
Thanks for the info! I thought it sounded kinda high.


Top
 Profile  
 
 Post subject: Re: Springfield Model 67E .410 pump
PostPosted: Thu May 19, 2005 8:06 pm 
Moderator
Moderator
User avatar

Joined: Thu Jan 08, 2004 7:12 pm
Posts: 3797
I had one in 20 Gauge, it was the cheapest pump I had ever used. Trigger housing is made of pot metal. Pump mechanism is very tight. I would not pay over 120.00 for one. The man is most likely lying to you.

_________________
Keep the Faith


Top
 Profile  
 
 Post subject: Re: Springfield Model 67E .410 pump
PostPosted: Sat May 28, 2005 11:36 am 
Limited Edition

Joined: Sun Jan 11, 2004 6:52 pm
Posts: 369
I wouldn't pay over $120 for the gun. The seller is feeding you a line. Also, these guns were made on a 12-gauge frame, so they're very heavy and rather clumsy. If you want a nice .410 pump, pay a little more and get a used wingmaster small-frame.


Top
 Profile  
 
 Post subject: Re: Springfield Model 67E .410 pump
PostPosted: Sat May 28, 2005 11:58 am 
Limited Edition

Joined: Sun Jan 11, 2004 6:52 pm
Posts: 369
2004 Blue book lists the following values: 90%, $155; 80%, $145; 70%, $135; 60%, $125.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: Alexa [Bot], BGK, bigjedd, Bing [Bot], bojo, Galho, Google [Bot], Google Adsense [Bot], Google Feedfetcher, joecor, Majestic-12 [Bot], pete blakeley, Shooter_Newbie, smlekid, SSPYYDER, tdxm


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group     -  DMCA Notice