CalendarCalendar   Photos  * FAQ
It is currently Thu Dec 18, 2014 11:21 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: 1100 remington piston seal installation.
PostPosted: Sun Jul 24, 2011 9:19 pm 
Tournament Grade

Joined: Sat Jan 31, 2004 9:23 am
Posts: 248
Location: Dubuque IA
What size for 20ga & for 28ga Viton O-Rings ? Thanks for the info on the 12ga




Top
 Profile  
 
 Post subject: Re: 1100 remington piston seal installation.
PostPosted: Mon Jul 25, 2011 12:01 am 
*Proud to be a*
*Proud to be a*

Joined: Wed Dec 29, 2010 12:54 pm
Posts: 384
McMaster-Carr also sells them in Viton and Teflon (Fluoropolymer). The Teflon ones are stiffer but seal as well with the advantage of lasting for years and wipe clean. I have a lifetime supply.


Top
 Profile  
 
 Post subject: Re: 1100 remington piston seal installation.
PostPosted: Mon Jul 25, 2011 5:53 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon May 19, 2008 8:20 pm
Posts: 10678
Location: Evangeline, Louisiana
Get four for $6 delivered off eBay and save the gas. 4 is a lifetime supply anyway unless you are incredibly ham handed. Nice to see an 8 year old thread revived.

_________________
What could have happened... did.
I do not trust Remington's dating service accuracy. If they were Match.com, you could end up with Nancy Pelosi.


Top
 Profile  
 
 Post subject: Re: 1100 remington piston seal installation.
PostPosted: Mon Jul 25, 2011 8:25 am 
*Proud to be a*
*Proud to be a*

Joined: Wed Dec 29, 2010 12:54 pm
Posts: 384
1100 Remington Man wrote:
What size for 20ga & for 28ga Viton O-Rings ? Thanks for the info on the 12ga

20 gauge is #19 Viton.
Don't get fleeced on antigun suckerBay. Pack of 6 for $1.44, 24 cents each, far less than suckerBay,
here:
http://www.professorfoam.com/servlet/th ... Categories
OR packages of 25 or 50 Viton or PTFE at McMaster-Carr
50 ETP fluoroelastomer 9464K73 $7.16 (14 cents each)
25 hard PTFE 9559K114 $10.96 (44 cents each)
http://www.mcmaster.com/#o-rings/=dbv0cc

I don't know the size of the 28 gauge but you can get a pack of six here for $1.44 (24 cent each):
http://www.mcmaster.com/#o-rings/=dbv0cc

Sell the surplus at your club or to friends. You'll cover shipping and they'll get a bargain, too!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page Previous  1, 2

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 1100 Remington Man, 31 Pump, 35, albanygun, Aldermanbj, baltz526, BGF, big pattern, BigPuffnTX, Bing [Bot], BOB_HARWELL, BobK, brad c, budrock56, Bug Doc, cannon cocker, Cheoah, DC-hunter, Don T, double20, Drew Hause, duckqwacker, Google [Bot], Google Adsense [Bot], Google Feedfetcher, GradeIII, gundogg, gunut 1, HazMat Ed, heelerman, HymieP, Icemon, IheartShotguns, ithacanut, JacksBack, jaguarxk120, jbrooster, jbuchanan24, KRIEGHOFFK80, LilBoog, llc, lossking, Marcduper, marsingbob, mykal19, NCMikeR, neangler, Old_Diabetic_100, oldthompson, oregunner, Pipeman, railroad, rfedele, s cobb, SDV, sera, shortgrub, shotgunhawk, sprickVT, SteveVio, Trapperjohn01, twistedoak, wfedwar, wildflights


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group     -  DMCA Notice