It is currently Fri Apr 20, 2018 3:38 am

All times are UTC - 6 hours [ DST ]

Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: replacement stocks & forearms
PostPosted: Sat Apr 15, 2006 8:10 am 
Utility Grade

Joined: Sun Feb 13, 2005 1:58 pm
Posts: 8
Location: Cincinnati, Ohio
I am looking for information regarding replacement stocks & forearms for H&R and NEF single-shot shotguns. I haven't had any luck searching this site for info, and H&R1871 doesn't reference it on their site so I am starting a "new" thread. Can anyone help?

Looking for Stevens Model 066 "Buckhorn" .22 rifle.
<A HREF="" TARGET="_blank"><B><I>C.U.T.E.--->Technical Firearm Information</B></I></A>

 Post subject: Re: replacement stocks & forearms
PostPosted: Sun Apr 16, 2006 2:41 pm 
Tournament Grade
User avatar

Joined: Fri Apr 01, 2005 10:56 am
Posts: 168
Location: Southeast Michigan
H&R has a new website up and running.
It took a liitle while to find it but the info your looking for is under the
"Barrel Accessory Program" about halfway down the page sub-labeled "Handi-Rifle Stocks"

They don't list the fore-ends nor some of their laminate versions.
They are available though through H&R.
Just call the customer service number for prices.
You'll find those folks very helpful.

NEF Sidekick ML (50 cal.)
H&R Ultra Slug Hunter (12 ga.)
Remington 870 Express (12 ga.)
Stevens 311-H SxS (20 ga.)
CZ 452 American (.22lr)

 Post subject: re: replacement stocks & forearms
PostPosted: Thu Jan 11, 2007 4:11 pm 
Utility Grade

Joined: Thu Jan 11, 2007 2:56 pm
Posts: 5
Location: northland, minnesota
this brand makes very nice stocks for H&R/NEF rifles and shotguns the stocks are built so well that they made some stocks for H&R/NEF like the survivor ... uctCode=33

 Post subject: re: replacement stocks & forearms
PostPosted: Mon Jan 15, 2007 11:50 am 
Utility Grade

Joined: Mon Jan 15, 2007 11:24 am
Posts: 4
Location: Lima Ohio
As far as ( Tupperwear ) Choate makes all the stocks for H&R / NEF , they also have some nice laminates and a Mossy Oak camo that you can get from the factory , you will need to call their CS as to what they have in stock + pricing .

# 5 has their phone number .


 Post subject: re: replacement stocks & forearms
PostPosted: Wed Mar 28, 2007 11:44 am 
Utility Grade

Joined: Sun Mar 25, 2007 10:07 pm
Posts: 13
For what it's worth, I put a ATI pistol grip with collapsible stock on my 20g Pardner. I just wanted it to be a little shorter while it was sitting next to the bed. I'm still undecided whether or not I like the stock though. It feels good, but the supplied bolt for the buttstock uses a flathead screw to hold it on. It's a PITA to install and tighten. The stock kept loosening up when I shot it because I couldn't get it tight enough. I took it off to shoot clays until I get another shotgun. When I reinstall the stock I'm going to get a regular bolt and a little thread locker for it and see if that helps.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]

Who is online

Registered users: Alexa [Bot], Bing [Bot], cbradford, Diddle, floridaford, Google [Bot], Google Adsense [Bot], Google Feedfetcher, john391, streamrocks, SuperXOne, trdjohn

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© 2017 Carbon Media Group Outdoors    - DMCA Notice