Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

Re: Shotgun Barrel Service! at Wholesale Prices for Members!
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=12&t=36237
Page 16 of 17

Author:  WVbirdman [ Tue Aug 21, 2018 1:16 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

Anyone talked to him recently? Curious if he's gotten out of the weeds yet. Have some barrel work I need done by first week of October, but I'm afraid to commit to sending it until he's squared away.

Author:  Bladeswitcher [ Sun Aug 26, 2018 7:27 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

My theory is that every time you call, your barrel goes to the back of the line . . . :wink:

I'm kidding, of course. I honestly don't understand this situation as it is so contrary with my experience with Mike O. I've sent Mike at least a half dozen barrels and probably closer to a dozen. In every case save one, I've had my barrels back in hand within 10 days. Typically, turnaround, including shipping, runs right at a week.

I hope he's OK.

Author:  rbertalotto [ Thu Aug 30, 2018 4:31 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

I emailed him last week and had a back and forth email conversation about putting chokes in my Ithaca 37. Sent the barrel off this morning......Hope it doesn't take 8 months! I need it for January......

Author:  Curly N [ Fri Aug 31, 2018 9:47 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

DallasCMT wrote:
nhithaca wrote:
About 115 miles and 2 hours one way.

That's not exactly close! I figured you meant it was about 1/2 hour away.


Close is a relative thing, he is a lot closer than you are. This whole saga is very interesting to me and I hope to get the full story. I am sure that it must be fairly complicated!

Author:  johnny0 [ Wed Sep 05, 2018 8:35 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

Sept 5th 2018 9:30 am Spoke to Mike, he's still recovering and doing his rehab exercises, working when he can....... so things are still moving slow, but moving!

Author:  nhithaca [ Wed Sep 05, 2018 12:46 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

RoyB
If you don't mind me asking, when did you send your barrel in?

Author:  johnny0 [ Wed Oct 31, 2018 5:09 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

10-31-2018

My barrel arrived repaired like "New" today.........Thank you!

Beautiful job!!........ you would never know one of the barrels had a bulge

Author:  eaglefreehb [ Mon Jan 21, 2019 9:52 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

I have a Mossberg 930 with an 18 1/2" open cylinder barrel. I would like to be able to add choke tubes to it. The tubes I need to be able to add are IC and IM extended choke tubes. I was wonder what it would cost. Thanks in advance for responses.

Author:  lossking [ Thu Jan 24, 2019 11:21 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

Here's the price list, and he gives a 20% discount to ShotgunWorld.com members.

Image

Author:  arkrunner [ Fri Jan 25, 2019 2:36 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

Big thanks to mike for a great job with fast turnaround. Had barrels threaded an back to me in 10 days

Author:  johnny0 [ Mon Mar 11, 2019 7:25 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

3-11-2019

Hi Mike......... My thought of the day

If my lower barrel isn't going to work out with a screw in choke system, what about a "Fixed" choke??

If the lower barrel was a fixed "IC" or "LM" ( .715 / .710 range) choke and I have the upper as a adjustable screw in, that would work just fine for Sporting Clays, which is my intent with that shotgun........

Let me know

johnO

Author:  Skeet_Man [ Sun Mar 17, 2019 12:24 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

Is this the most current price list?

Image

Author:  huntinghudson [ Wed Mar 20, 2019 2:07 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

I think there is a newer list but it got lost above. Lossking, do you still have it?

Author:  lossking [ Thu Mar 21, 2019 7:28 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

huntinghudson wrote:
I think there is a newer list but it got lost above. Lossking, do you still have it?


The one I posted was dated 2/1/12. The 2013 prices are the same, except return shipping and insurance went up from $15 to $20.

Author:  huntinghudson [ Fri Mar 22, 2019 10:46 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

Image

Author:  lossking [ Fri Mar 22, 2019 11:04 am ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

Good job, hudson. Where'd you find it?

Author:  huntinghudson [ Fri Mar 22, 2019 4:40 pm ]
Post subject:  Re: Barrel Service & Stockbending - 20% discount for SW Memb

A friend sent it to me from a recent transaction. I spoke to Mike today as well and sent two barrels. This is the latest. It would be good to place it back on page 1.

Author:  lossking [ Sat Mar 23, 2019 10:29 am ]
Post subject:  Re: Shotgun Barrel Service! at Wholesale Prices for Members!

Good to know his new and still reasonable fees. Thanks for posting them.

Author:  jcowie [ Mon Mar 25, 2019 11:27 am ]
Post subject:  Re: Shotgun Barrel Service! at Wholesale Prices for Members!

I have an older Franchi Falconet over under that’s has full chokes. Wondering if I can send it down to Mike from Canada to have chokes out in?
Thanks

Author:  bobman [ Fri Mar 29, 2019 8:31 am ]
Post subject:  Re: Re: Shotgun Barrel Service! at Wholesale Prices for Memb

Can I ask how do you pay him?

postal money order? check? wad of cash in box with barrel?

Please advise thanks

Bob

Page 16 of 17 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/