Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

Removing camo dip
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=12&t=528748
Page 1 of 1

Author:  Dr Duk [ Mon Feb 22, 2021 10:19 am ]
Post subject:  Removing camo dip

Can it be done?
Who does it?

Author:  Virginian [ Mon Feb 22, 2021 11:20 am ]
Post subject:  Re: Removing camo dip

From the metal, no problem. Either acetone or lacquer thinner. As long as you don't mind removing any other finish too, that will also work on a wood stock. Synthetic, I don't know.

Author:  MNGunner [ Tue Feb 23, 2021 8:09 am ]
Post subject:  Re: Removing camo dip

Virginian wrote:
From the metal, no problem. Either acetone or lacquer thinner. As long as you don't mind removing any other finish too, that will also work on a wood stock. Synthetic, I don't know.


I do know acetone and strong lacquer thinner will damage plastic, but as Virginian stated would be worth trying on the metal.

Author:  Dr Duk [ Tue Feb 23, 2021 9:58 am ]
Post subject:  Re: Removing camo dip

Can you place a hydro dip pattern over an existing one?

Author:  Scout80 [ Mon Mar 29, 2021 4:13 pm ]
Post subject:  Re: Removing camo dip

Might be worth contacting Rob Roberts' Shop. They say on their site they remove Dura-Touch coatings but don't list any other types specifically - https://www.robrobertsgunworks.com/camo-dipping

Author:  RandyWakeman [ Mon Mar 29, 2021 4:39 pm ]
Post subject:  Re: Removing camo dip

Dr Duk wrote:
Can it be done?
Who does it?


Yes, of course.

Question: What if there is already a finish on my part/product?

We use several different methods for prepping parts/products prior to dipping. Some items may require bead/sand blasting while others may require light sanding or scuffing. We will work with you to determine what will be the best method for your particular piece, and let you know exactly what to expect.


Lee at Black Ice is the best in the business: http://blackicecoatings.com/services/ .

Author:  CriscoKid [ Mon Mar 29, 2021 5:20 pm ]
Post subject:  Re: Removing camo dip

Dr Duk wrote:
Can you place a hydro dip pattern over an existing one?



With proper cleaning first, Yes (BT, DT - NP)

.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/