Hello Everyone -

I'm new to the forum.

I'm looking for some parts for an old WesternField XNH-560-8A that my Grandpa gave to me a LONG time ago.

There was one part in particular that I cannot find and was thinking the experts here might be able to help me locate it. The part I am looking for is the LIFTER PAWL SPRING Product #: 10390A on the NUMRICH gun parts website.

Would anyone here know where I might be able to locate one of these ?

.

Welcome to SGW ! !

Western Field, for one, didn't make guns - established large manufacturers do, and used to furnish their guns to chain stores, marked with however the chain store wanted.

You should determine what factory actually made your store-branded gun, then search for the part you need.

I suspect you have a long-discontinued Noble Model 60 or 66 - but a few good pics may help you to get assistance.

Hello CriscoKid and thank you for the warm welcome !!!!

You are correct, I should have posted more details in my original post along with some PICS so my apologies for that.

From what I can tell NOBLE made the gun for distribution to Montgomery Ward way back in the day.

Mine appears to be a model 60, attached are some PICS of the gun along with a couple of PICS of the part that "I think" I'm looking for.

.

I would suggest you go to the Numrich home page and enter "noble lifter Spring" into the search window at the top of the page.

Then you can sift through the 120 pics of Noble lifter springs to try to match what you want (regardless of the gun's model# )

https://www.gunpartscorp.com/search#que ... er%20sprig

.

Have you got the old one? Even broken it will serve as a pattern.
Spring wire stock from your local hobby store, a vise and a piece of pipe to wind it around. Second or third attempt at spring making usually works in my shop.

I’ll try searching their page again that way and see what I come up with.

I don’t have the original part to pattern off of.