ShotGunWorld Shotguns

It is currently Sat Dec 05, 2020 12:50 pm

All times are UTC - 6 hours [ DST ]





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Mid-Bead to Replace Front Bead
PostPosted: Fri Aug 28, 2020 9:43 pm 
Utility Grade

Joined: Mon Jul 27, 2015 6:48 pm
Posts: 6
I am stepping up to an Invictus V and my previous Guerini I had replaced my front bead with a mid bead sized bead (about .067” in diameter) and would like to do the same with my new gun. I remember previously I had gotten the beads off of brownells but have since been unable to find a mid bead in a 3mmx.05 thread pattern. Does anyone have a lead or an idea of where I could find one that would fit? Thanks.




Top
 Profile  
 
 Post subject: Re: Mid-Bead to Replace Front Bead
PostPosted: Mon Aug 31, 2020 7:57 am 
Crown Grade

Joined: Thu Jul 31, 2008 11:12 am
Posts: 5611
http://www.marblearms.com/shotgun-beads.html

http://nebula.wsimg.com/43ff1d0e0a101d5 ... oworigin=1


Top
 Profile  
 
 Post subject: Re: Mid-Bead to Replace Front Bead
PostPosted: Tue Sep 01, 2020 6:47 pm 
Presentation Grade
User avatar

Joined: Fri Aug 09, 2013 7:56 am
Posts: 546
Location: San Antonio, Texas
VTCTGarrett - At some point about two years ago, I completely removed all beads from my guns. I haven't missed or needed them at all. To have them means you may (will!) look at them while shooting, and that is always bad. I still fight "measuring" like a crack addict fights using.

_________________
Andy "oinodam"

Caesar Guerini Summit Limited
Fabarm XLR5 LR
CZ Sporter Stnd Grade
Winchester Model 12 16 Gage
Michigan Shooting Centers
National Shooting Center


“With age comes wisdom, but sometimes age comes alone” - Oscar Wilde


Top
 Profile  
 
 Post subject: Re: Mid-Bead to Replace Front Bead
PostPosted: Wed Sep 02, 2020 6:01 pm 
*Proud to be a*
*Proud to be a*

Joined: Mon Nov 09, 2009 11:53 am
Posts: 1088
Location: Dallas, Texas
Measuring--sigh. Taking off the beads is a great idea. But if I could only find some "invisi-noleum" to coat the barrels with. MAJ

_________________
'Where is the kaboom? There was supposed to be a giant earth-shattering kaboom!" Marvin the Martian


Top
 Profile  
 
 Post subject: Re: Mid-Bead to Replace Front Bead
PostPosted: Wed Sep 02, 2020 6:48 pm 
Utility Grade

Joined: Mon Jul 27, 2015 6:48 pm
Posts: 6
oinodam- I will probably go this route if I cannot find a small mid bead sized bead to replace the snow globe at the end of the barrel. Incredibly happy with the gun and the way it handles, however the bead proved to be a big distraction. It may be the no bead life for me!




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 35, 47MolineRTU, AJ-M12, avogunner, Basstar, BerettaEd, bfre49849, Bing [Bot], Brooksy08, bullseye-69, Cfelix10, cookoff013, deadbird995, Dealman, df, EricB, fullgallon, Gadwall, Google [Bot], Google Adsense [Bot], gthudspeth, GunnerFrank, Gunsmoke1734, Husker90, icyclefar, Irish Red & White, JacksBack, Jaspo01, JJK, jski3, liveblues, Lu 45, mactownbob, Markepilot, mb94, md2020, rbdjr, Researcher01, rickeroo, searun, shotgunmanny, Skeet_Man, Steeler [Crawler], sx1 fan, Tidefanatic, tops911, torreyinreno, trackerboy, Tvbh40a, VdoMemorie, VTHokiesDuckHunter, Wchadw, Win50, winmod21, wjonessc, Xftrplt, YevetS, zxcvbnm


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice