For the past two years I have been involved in developing long range-dense center cone patterns for 3" 12 ga. mag. shotshells. I would like to hear your recipes and results. <p></p><i></i>

I haven't worked on any turkey loads as of yet, however I'm always interested in new recipes. <br><br>The duplex 4x6 factory loads that I use have patterned well and more importantly the turkeys show they work fine. I'm not a distance shooter with turkeys, but in some of the public areas or with limited time to hunt a peice of property it is always good to be able to take what's presented. <br><br>I use 2.75 gold medal hulls for waterfowl and would look at the 3" cheddite hulls to start as I have them on hand. <p>There is a fine line between hobby and insanity.</p><i></i>

Excellent.....I prefer the Fiocchi 12 ga. 3" "Brown"...They are unskived for roll crimps...16mm brass and 7mm base wad. I have also developed Styro filler wads. I have also found that the shotcups sprayed with Ms.Moly or dusted with Motor Mica helps on tight uniform patterns. I will be happy to discuss methods and loads with any one interested. Best Regards, James <p></p><i></i>