MEC progressive owners, a lifetime supply of index balls?

Sinjin1952 · **Posted:** Mon Oct 19, 2009 10:23 pm

I have retired but am still able to keep this offer going. Mailing address has changed and the price has increased. I can't believe this has been going on this long.

Please read below for updated info.

Regards to all!

Hello Fellow Mec Progressive Owners:

Every time we spill shot or powder, the machine must be taken apart to clear everything and the easiest part to lose is the index ball.

The Mec part is No. 515D and their cost is $ 1.33 each.

I buy steel balls in bulk for a product we manufacture.

As I was speaking to my “Ball Guy” the other day, I asked him to send me some .125 balls equivalent to the MEC part.

I purchased a quantity of .125 balls; C/S Chrome Steel, 52100, Chrome Alloy Tool Steel, both for myself and to offer to my Friends on the forum.

If anyone would like a lifetime supply of these balls to have on hand, send me:

A self addressed stamped envelope; that is, an envelope with your address and a postage stamp on it, and two, one dollar bills.

I will send you 20 balls in your envelope.

Mail to:

RLTKFT
5001 Dorrell Lane
Las Vegas, NV 89115

Best Regards,

regularjoeinga · **Posted:** Mon Oct 19, 2009 11:32 pm

You know, I could use some balls....

Muley · **Joined:** Sun Nov 18, 2007 8:10 pm **Posts:** 162

Hey Sinjin,
You gotta lot a balls--------- in that there spoon. I wonder how well they would load and shoot.

Goodluck,
Muley

Sinjin1952 · **Posted:** Tue Oct 20, 2009 9:56 am

Thanks Muley:

That spoon is just a small sample, I do have a lot of balls.

That's what I figured, if no one wants them, I could always load and shoot them!

But I will keep a few taped to my Grabbers!

Best Regards,

maggs01 · **Posted:** Tue Oct 20, 2009 10:10 am

Reminds me...

The other day, I asked my wife to stop at the Stihl chainsaw dealer and ask for Norm at the service counter...he knows what parts I need. I just talked to him.

She did just ask as I asked...

Hi Norm, my husband just called you... He needs the two nuts that hold the bar on our saw???

Yeahhh....NUTS for the bar. I should have just given her the part number.

Maggs...

Sinjin1952 · **Posted:** Sat Oct 24, 2009 9:24 pm

Hello All:

I've received several orders and all that were received by Friday were shipped Friday afternoon. You should receive them soon.

Thanks & Regards,

deckart · **Posted:** Mon Oct 26, 2009 9:09 am

Are you still filling orders? May be interested. deckart

Sinjin1952 · **Posted:** Mon Oct 26, 2009 11:06 am

Deck asked:

Quote:

Are you still filling orders?

You bet, it's an open ended offer until I run out, if ever. You see, I have a lot of balls.

Regards,

theq1994 · **Joined:** Fri May 22, 2009 9:08 pm **Posts:** 369

Do all Mec Progressives have this? I don't see a spot to put one on mine...

Curly N · **Posted:** Mon Oct 26, 2009 7:44 pm

theq1994 wrote:

Do all Mec Progressives have this? I don't see a spot to put one on mine...

What Mec do you have? That will help.

Mike-n-CA · **Posted:** Mon Oct 26, 2009 7:55 pm

Sinjin1952 wrote:

You bet, it's an open ended offer until I run out, if ever. You see, I have a lot of balls.
Regards,

One buck and a self addressed envelope sent today
Mike

theq1994 · **Joined:** Fri May 22, 2009 9:08 pm **Posts:** 369

I have a Mec 9000G.

Curly N · **Posted:** Mon Oct 26, 2009 10:25 pm

theq1994 wrote:

I have a Mec 9000G.

Yes you do have one, or you used to. That ball is on the back of the Column, under that little Ber. copper finger that likes to break off and that you have a spare of, You do have a spare don't you? Raise the column spring about an inch to see the whole copper looking finger thingy.

fuzzy-one · **Posted:** Tue Oct 27, 2009 1:47 am

Sinjin1952 wrote:

Deck asked:

Quote:

Are you still filling orders?

You bet, it's an open ended offer until I run out, if ever. You see, I have a lot of balls.

Regards,

I too have mailed a buck and a SASE today!!!

Thank You

Sinjin1952 · **Posted:** Wed Oct 28, 2009 4:32 pm

Fuzzy , Mike-N and other orders that arrived by today, mail this afternoon.

Thanks,

I would appreciate a comment or two of condition on arrival of the envelopes. I think I am packaging adequately for what I am shipping but I'd like to be sure.

Regards,

Sinjin1952 · **Posted:** Thu Oct 29, 2009 8:37 pm

A small point:

If you send me a self addressed stamped envelope for the balls, it is only necessary to put one stamp on it.

One stamp is sufficient to mail 1 oz. 1 oz.= 437.5 grains

20 balls = 40.5 grains, the rest is the envelope, the poly bag for the balls and some packing.

So one stamp is completely adequate.

Best Regards,

fuzzy-one · **Posted:** Fri Oct 30, 2009 11:34 pm

Sinjin1952 wrote:

Fuzzy , Mike-N and other orders that arrived by today, mail this afternoon.

Thanks,

I would appreciate a comment or two of condition on arrival of the envelopes. I think I am packaging adequately for what I am shipping but I'd like to be sure.

Regards,

Sinjin, Mine arrived today and the package was in perfect condition. Thank you for sharing with the forum.

fuzzy

ducman998 · **Posted:** Sun Nov 01, 2009 1:04 am

$1 sent for some balls

smokestake · **Posted:** Sun Nov 01, 2009 6:00 pm

sinjin,

$1 sent for some index balls. Thanks for the offer!

Paul

batex · **Posted:** Sun Nov 01, 2009 10:40 pm

This is a most generous offer. You are to be commended. I sincerely appreciate it and thank you. My envelope and a $1 is on the way!

MEC progressive owners, a lifetime supply of index balls?

Who is online