ShotGunWorld Shotguns

It is currently Fri Jul 03, 2020 3:12 pm

All times are UTC - 6 hours [ DST ]


Image



Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: MEC 9000 problem
PostPosted: Fri Jun 26, 2020 9:48 am 
*Proud to be a*
*Proud to be a*

Joined: Sat Oct 13, 2012 8:04 pm
Posts: 2228
The machine was working fine until a piece of pvc pipe I had on the workbench hit the loader. Now the shell popping out of the collet gets pinched and won't advance. I am not sure if it is:
Adjustment for the shell carrier release or,
Adjustment for travel of slide bracket

These adjustments are on pgs 30 and 31 of the MEC manual,its not clear to me which adjustment is correct so I thought I would ask before I start. Thanks




Top
 Profile  
 
 Post subject: Re: MEC 9000 problem
PostPosted: Fri Jun 26, 2020 10:49 am 
Diamond Grade
User avatar

Joined: Sun Jun 24, 2018 2:51 pm
Posts: 1357
Location: S.E. Wisconsin
Lets start with page 31 and the shell carrier release, turn that nut down far enough so your shell carrier stops advancing, then go back up until it does, add a 1/4 turn.

As far as the slide bracket is concerned, it is very important to get/have the "over travel" they refer to or the issue you are talking about will occur even with the carrier release set where you now have it.
Forward travel is adjusted with the eccentric nut in Fig. 62.

Steve

_________________
The More Times You Pull The Trigger The More Fun You Are Having.
I repair MEC presses. PM me.
Used to be Steve Y


Top
 Profile  
 
 Post subject: Re: MEC 9000 problem
PostPosted: Fri Jun 26, 2020 2:56 pm 
*Proud to be a*
*Proud to be a*

Joined: Sat Oct 13, 2012 8:04 pm
Posts: 2228
Steve, thanks I will give it a try.


Top
 Profile  
 
 Post subject: Re: MEC 9000 problem
PostPosted: Sat Jun 27, 2020 10:17 pm 
*Proud to be a*
*Proud to be a*

Joined: Sat Oct 13, 2012 8:04 pm
Posts: 2228
Steve , you repair Mec reloaders? What is your e-mail, I have some questions.
Thanks ,Wayne


Top
 Profile  
 
 Post subject: Re: MEC 9000 problem
PostPosted: Sun Jun 28, 2020 6:08 am 
Diamond Grade
User avatar

Joined: Sun Jun 24, 2018 2:51 pm
Posts: 1357
Location: S.E. Wisconsin
wrfish wrote:
Steve , you repair Mec reloaders? What is your e-mail, I have some questions.
Thanks ,Wayne


Its in the PM I sent you.

Steve



_________________
The More Times You Pull The Trigger The More Fun You Are Having.
I repair MEC presses. PM me.
Used to be Steve Y


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: albanygun, bigeejakes, Bing [Bot], Blackdog56, BriderLV, cbradford, Coopdog, Cubby, David Spear, Denver1911, dfw_bill, DooFighter, Drew Hause, ebcjr, EricB, F3Horn, Fasttalker27, federal, Galaxy Flyer, Google [Bot], Google Adsense [Bot], Gunning Bird, HenryPeter, HenryVac, HusqvarnaSweden, Jason Johnson, Jaspo01, Joeracer44, kelias3479, LG, Litespeed, lt0026, Major146, Maser, mooseontheloose1, MRIDOC1, NTxAg, Okinawa, oneounceload, PALongbow, petsakias, Pettifogger1, pitandremington, popcorn09, Rcflyer12, rdmiller380, rpenmanparker, Rudolph31, Saltydog055, sam50bmg357, scott12v, shacked, southdakbearfan, strut64, Thskeer, toptechX6, TPerk92, trevijazz, twohigh, Yahoo [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
© 2017 Carbon Media Group Outdoors    - DMCA Notice