ShotGunWorld Shotguns

It is currently Wed Nov 25, 2020 9:41 am

All times are UTC - 6 hours [ DST ]


Image



Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Anyone out there reload the Rio blue steel super magnum 3.5
PostPosted: Sun Jul 26, 2020 8:05 am 
Utility Grade

Joined: Sun Jul 26, 2020 7:39 am
Posts: 5
Anyone out there reload the Rio blue steel super magnum 3 1/2inch hulls? At the price these seem to be the cheapest I can get in 3.5 loads. But I'd feel bad trashing the hulls when im done. But load data seems to no where to find. I even emailed ballistic products who told me they don't have data as Rio doesn't make 3.5 hulls. With other Rio loads on this forum some say use same as data like fed?




Top
 Profile  
 
 Post subject: Re: Anyone out there reload the Rio blue steel super magnum
PostPosted: Sun Jul 26, 2020 9:27 am 
Presentation Grade

Joined: Sat Apr 20, 2013 7:43 am
Posts: 642
Not sure Rio makes their 3 1/2" hulls , I would guess Cheddite maybe does for them also , like
other brands ( Kent ,Fed, Gamebore ) these should load the same .


Top
 Profile  
 
 Post subject: Re: Anyone out there reload the Rio blue steel super magnum
PostPosted: Mon Jul 27, 2020 12:20 pm 
Tournament Grade

Joined: Fri Dec 27, 2019 7:22 pm
Posts: 283
Location: NE South Dakota
They are a UEEE hull, close but not a cheddite hull.


Top
 Profile  
 
 Post subject: Re: Anyone out there reload the Rio blue steel super magnum
PostPosted: Mon Jul 27, 2020 12:37 pm 
Presentation Grade

Joined: Sat Apr 20, 2013 7:43 am
Posts: 642
southdakbearfan wrote:
They are a UEEE hull, close but not a cheddite hull.


Then they're made by the Hull Co. , a Straight Walled hull , the only difference being the
Base wad height for a good stack height . In my opinion any load smaller than 1 3/8 oz
belongs in a 3" hull but My opinion means nothing as I only load and shoot 2 3/4" loads .


Top
 Profile  
 
 Post subject: Re: Anyone out there reload the Rio blue steel super magnum
PostPosted: Thu Jul 30, 2020 6:55 am 
Utility Grade

Joined: Sun Jul 26, 2020 7:39 am
Posts: 5
Thank you il have to look in to the UEEE hulls. If I can find some ideas I'd even send some in to precitionreloading to be tested. I should be able to find something about them in this forum!




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: .45colt, 58PERAZZI, albanygun, att, Bakerloo, bigeejakes, Bing [Bot], Bladeswitcher, brnzbk, casonet, cookoff013, DEG, doug_andrea, Drew Hause, dubob, ebcjr, ecampo, EricB, Gadwall, geometric, Google [Bot], Google Adsense [Bot], gordonhurst, grade6man, harleyd1911, hoosierhawk95, hoytshooter, JacksBack, JayMc, JPRICE, justice12, Kannoncocker, kcmetman, KRIEGHOFFK80, kuffs06, leftex, lt0026, Lu 45, maltzahn, Maser, McFarmer, mikeydio, msmith, myshootinstinks, nesto, nhithaca, oldshotty, perdizman, railroad, randyflycaster, raymond525, Riflemeister, Road Man, RUT, SDV, shacked, slotracer577, smitka1, TEH, Tex68W, The Happy Kaboomer, tschlemm, ysr_racer


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice