ShotGunWorld Shotguns

It is currently Wed Feb 24, 2021 5:57 pm

All times are UTC - 6 hours [ DST ]


Image



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Load For Fiocchi 2 1/2" 410 Hull
PostPosted: Fri Feb 19, 2021 4:10 pm 
Presentation Grade

Joined: Mon Feb 09, 2004 6:09 pm
Posts: 965
Does anyone have a load useing :
Fiocchi 2 1/2" 410 hull
Fiocchi Primer
Alliant 410 powder
Claybuster #CB 5050-410HS wad
1/2 oz shot - 1200 - 1300 fps .

Was given appox 1000 of these hulls . Would like to use them for skeet loads , load once and toss .




Top
 Profile  
 
 Post subject: Re: Load For Fiocchi 2 1/2" 410 Hull
PostPosted: Fri Feb 19, 2021 5:18 pm 
Shooting Instructor
Shooting Instructor

Joined: Wed Apr 14, 2004 12:11 pm
Posts: 3580
Location: Afton, VA
Unless someone had a load tested you won't find any recipes for that combination. Alliant does not test European hulls, and the only non-USA primers I've seen Alliant loads for is the Cheddite primer.

_________________
Doubled Distinguished
NRA Benefactor Member
NSSA Life Member
NAHC Life Member
VA State Shooting Association Life Member
NSSA Referee
NSSA Level I Instructor


Top
 Profile  
 
 Post subject: Re: Load For Fiocchi 2 1/2" 410 Hull
PostPosted: Fri Feb 19, 2021 5:27 pm 
Tournament Grade

Joined: Thu Oct 04, 2018 4:22 am
Posts: 112
If you're not in a hurry, you could load I think 6 using the Alliant recipe for Federal hulls and Federal primers. Send them out for testing. A couple of testing labs have been listed on this forum. -Ed


Top
 Profile  
 
 Post subject: Re: Load For Fiocchi 2 1/2" 410 Hull
PostPosted: Fri Feb 19, 2021 5:35 pm 
Shooting Instructor
Shooting Instructor

Joined: Wed Apr 14, 2004 12:11 pm
Posts: 3580
Location: Afton, VA
I would suggest the Winchester HS hull recipe, substituting the Fiocchi hull and Fiocchi primer. Load six and send them to Precision Reloading for testing.

_________________
Doubled Distinguished
NRA Benefactor Member
NSSA Life Member
NAHC Life Member
VA State Shooting Association Life Member
NSSA Referee
NSSA Level I Instructor


Top
 Profile  
 
 Post subject: Re: Load For Fiocchi 2 1/2" 410 Hull
PostPosted: Sat Feb 20, 2021 9:47 am 
Tournament Grade

Joined: Wed Sep 23, 2020 2:45 pm
Posts: 113
Location: Ozarks in Arkansas
In my BPI small bore data manual.

Fiocchi 2.5 hull
Fiocchi 616 primer
410 powder loads with
12 g fps 1200
13 g fps 1210
13.2 g fps 1235
[Wad stump BPI wad only] (No Clay wad data)
Shot 8


Top
 Profile  
 
 Post subject: Re: Load For Fiocchi 2 1/2" 410 Hull
PostPosted: Sat Feb 20, 2021 10:07 am 
Crown Grade
User avatar

Joined: Sun Aug 24, 2003 3:31 pm
Posts: 17923
Location: Kearney NE
Pretend they are Federals and have at it.
Woops, did I say that?

BP



_________________
You lie to the Government, it's a Felony, they lie to you, it's Politics!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 2LegsBetter, badabing11, Bing [Bot], birdhunter39, Blakesblakey, Bobcat Welding, camhabib, casonet, cbradford, DavidRamey, Denver1911, dukman22, Ernest T, fishrising, Fluke, Google [Bot], Google Adsense [Bot], Google Feedfetcher, Halwg, Hwcn, JJPinOhio, John H, johnnie g, jtf650, kgwolo, McFarmer, mi-fordson, mmlj, oneounceload, phishbum, Pine Creek/Dave, pow1, raptor347, RFlyer, Riflemeister, Road Man, sandcountyalmanac, senoiaslim, sera, sgc, shacked, ShooterBurke, shootingcajun, Sigpro, Smitch3806, sneem2, Stk218, strut64, SuperXOne, tastycake, Triggw, tsavery1, twfran, txlefty, winmod21, wjonessc, wkirk


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice