ShotGunWorld Shotguns

It is currently Wed Oct 21, 2020 8:05 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: .410 BROWNING BPS
PostPosted: Wed Aug 05, 2020 5:40 pm 
Utility Grade

Joined: Sun Jul 29, 2018 10:57 am
Posts: 11
Looking at a BPS . Anyone have one or shot one? PROS / CONS ?




Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Wed Aug 05, 2020 8:05 pm 
Diamond Grade

Joined: Wed May 27, 2009 6:05 pm
Posts: 1050
I have one for skeet, it’s big for a .410 which is nice. Very smooth shucker i like it a lot.


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Wed Aug 05, 2020 8:37 pm 
*Proud to be a*
*Proud to be a*

Joined: Sun Feb 18, 2007 11:22 am
Posts: 8971
Location: Rochester, NY
I have one. It's one of my favorite guns. No issues with mine, the trigger pull is on the heavy side but I'm a trigger slapper so I really can't tell when shooting.

_________________
S3 Smingler Shotgun Sports
Ian Smingler
585-613-8098
[email protected]
http://www.sminglershotgunsports.webs.com

Manufacturer of Custom Brass Barrel Weights for over/under, top single, and unsingle shotguns.


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Wed Aug 05, 2020 8:53 pm 
Field Grade

Joined: Sun Mar 16, 2014 4:22 pm
Posts: 24
Very fun gun for skeet have had mine for six years no problems. BPS is not the easiest cleaning pump gun but after you do it a few times you will get use to it.


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Thu Aug 06, 2020 9:48 am 
Limited Edition

Joined: Thu Jul 05, 2007 9:44 am
Posts: 392
Location: Murfreesboro, TN
Love my BPS Hunter. Little heavier than the Ithaca 37, but also ejects the empties at your feet for easy retrievel and smooth as butter. The bluing on my BPS is the best finish on any shotgun I own including my beloved Beretta O/U guns. The newer ones don't seem to have the nicer wood and sometimes are a matte finish. Pick one that suits your needs and rock on! Everyone needs another shotgun.

_________________
"You generally find a better grade of person around a shotgun than a golf club or other sports" - Gil Ash


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Thu Aug 06, 2020 10:07 am 
Field Grade

Joined: Tue Apr 14, 2015 11:47 pm
Posts: 91
I had one, nice gun. In my opinion it was way to heavy at 7-1/2 lbs. Sold it and bought an 870 Wingmaster. For me the Remington is not only lighter (6 lbs), but smoother and better balanced.


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Thu Aug 06, 2020 5:07 pm 
Utility Grade

Joined: Sun Jul 29, 2018 10:57 am
Posts: 11
Thanks for the help.


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Sat Aug 08, 2020 10:49 am 
Crown Grade
User avatar

Joined: Thu Apr 14, 2005 12:26 pm
Posts: 3070
Location: MO
Heavy gun, beautiful though.

_________________
The population of idiots is growing by leaps and bounds and presently they are not all able to find employment within the government. So watch out, they are everywhere!


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Tue Aug 11, 2020 2:13 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Wed Mar 31, 2010 11:22 pm
Posts: 524
Location: East central WI
I'm sure the first .410 I ever shot was a friend's pretty Browning pump on a skeet field. I hit a couple of targets from station 4 and have been enamored for at least 40 years with the gauge. Last gun I bought was a Browning 725 Sporting .410. It's almost more fun than a guy deserves to have.
Hope you're young enough to pick up those hulls. Break some targets with it and you'll want more of that. Get good shells to reload! (Win AA's) Have fun!

_________________
Stand up, step forward, do the right thing.
Work hard, play hard, have fun!


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Thu Aug 20, 2020 4:31 am 
Utility Grade

Joined: Sun Oct 25, 2009 5:02 pm
Posts: 13
Location: SE USA
LOP is fairly long on these from the factory. Mine was a very good shooter from the box and this is one I'll never sell. Weight is about perfect for my taste. The bottom ejection is good for lefthand and righthand shooters alike. It is tough to clean but there aren't that many places it can get dirty.

With my new pump guns, I like to oil the receiver/bolt area, outer magazine tube (where it comes into contact with forearm metal), and action bar(s) pretty heavily and rack them a couple hundred to one thousand times while empty and depressing bolt release. I periodically clean the dirty oil from the surfaces and re-lube during the process. The process helps to micro polish out the small manufacturing imperfections and really slicks them up before heading to the field or range. Note you will lose some finish from this procedure but that's going to happen with a pump gun in most cases anyway.

Stock up on .410 ammo when you see a deal. Decent hunting 3" ammo seems to run around $14/box in my area. AA 2-1/2" can usually be found around $10/box locally. In my opinion, anything below the quoted prices is a pretty good bargain.

It's a great gun to bring out to the Dove field or to separate good shooters from great ones on the clays course. Enjoy!


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Thu Aug 20, 2020 3:34 pm 
Diamond Grade
User avatar

Joined: Thu Oct 30, 2008 4:37 pm
Posts: 1006
Location: Colonie, NY
Nice gun but to heavy, I believe built on a 20GA receiver.

_________________
Veteran 1968-1974, NRA Life Member

"shoot what ya like, like what ya shoot".....it's that simple!


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Fri Aug 21, 2020 8:21 pm 
Utility Grade

Joined: Sun Jul 29, 2018 10:57 am
Posts: 11
Yes it is on a 20 ga. frame. Passing on it. Tristar viper g2 might be in my future.


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Sat Aug 22, 2020 8:57 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Wed Feb 27, 2013 12:58 pm
Posts: 3539
Location: Sag Harbor, New York
I have one for "Sub Gauge Pump Day" at the club. Although I am not a huge fan of loading from the bottom, I like it ejecting that way and enjoy shooting the gun. It does function smoothly.

Bob

_________________
Robert Kittine WA2YDV
New York, New York & Sag Harbor, New York


Top
 Profile  
 
 Post subject: Re: .410 BROWNING BPS
PostPosted: Sat Oct 03, 2020 10:18 am 
Tournament Grade

Joined: Tue Sep 30, 2014 8:45 am
Posts: 265
Location: Illinois
Love my BPS 410. Shells are layed at your feet for easy retrieval




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: a_mans_worth, Airmedic1, albanygun, Alleycat, amboy49, Auldthymer, BAArcher, Bing [Bot], birdhunter39, Blackdog56, Bladeswitcher, Brad_W, cafowler1000, captjsjr, ccL, chemclay, Curly N, D McMillen, Dalee100, Dbl Auto, desmobob, dmartinb, dpe2002, drcook, EricB, Ernest T, firebricker, fishrising, floridaford, geometric, goadahead, Google [Bot], Google Adsense [Bot], HenryPeter, hopper810, Irish Red & White, ithacanut, JRR2255, jwr50, Keperkey, loneranger, Lu 45, mb94, McFarmer, MeatSweats, Mike4111, misterdom, msmith, noweil, NuJudge, PKW-Indiana, psf3, rbdjr, ric1911a1, Road Man, Rooster booster, Rubberhead, shacked, Shooting Coach, southdakbearfan, SWPAMike, Tidefanatic, tomahawk, treeduck71, Ultraman, valencman, WAGinVA, wrfish, Yahoo [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice