ShotGunWorld Shotguns

It is currently Sun Jan 17, 2021 8:06 pm

All times are UTC - 6 hours [ DST ]


Image



Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Remington Mod Choke in mystery gauge. How to ID choke gauge
PostPosted: Thu Dec 31, 2020 2:28 am 
Utility Grade

Joined: Thu Apr 30, 2020 4:38 pm
Posts: 14
Hi, all.

I have this Remington Mod screw in choke whose gauge I want to identify

measurements:

internal diameter measurement at threaded end = .733"
internal diameter measurement at choke wrench end = .695"

external diameter measurement at threads = .811"
external diameter measurement at choke wrench end = .819"
external diameter below threads = .769

Hope someone wiser can help!

kind regards




Top
 Profile  
 
 Post subject: Re: Remington Mod Choke in mystery gauge. How to ID choke ga
PostPosted: Thu Dec 31, 2020 2:31 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Sun Aug 21, 2005 8:42 pm
Posts: 28884
Location: Missouri
That’s a 12 gauge full choke Remchoke.

If it’s .695 at the muzzle, with .733 bore.

_________________
I have never considered a difference of opinion in politics, in religion, in philosophy, as a reason for withdrawing from a friend. Thomas Jefferson


Top
 Profile  
 
 Post subject: Re: Remington Mod Choke in mystery gauge. How to ID choke ga
PostPosted: Wed Jan 13, 2021 8:16 am 
Utility Grade

Joined: Thu Apr 30, 2020 4:38 pm
Posts: 14
SuperXOne wrote:
That’s a 12 gauge full choke Remchoke.

If it’s .695 at the muzzle, with .733 bore.


Thank you much.


Top
 Profile  
 
 Post subject: Re: Remington Mod Choke in mystery gauge. How to ID choke ga
PostPosted: Wed Jan 13, 2021 1:27 pm 
Crown Grade

Joined: Sun Mar 03, 2013 11:01 am
Posts: 6299
Location: Newton Kansas
If it were a 10-gauge choke, the "bigger end", would I.D. between 0.775" and 0.795".

A 12-gauge, the "bigger (bore) end, would ID somewhere between 0.725" and 0.745"
Yours is a 0.733".

16 gauge: 0.665" to 0.685"

20-gauge: 0.615" to 0.635"

The "bigger end" the Bore End, should be somewhere of a size within the tolerance range of the gauge it is for.
The Constriction end, is then whatever it is, relative to it's bore diameter, but is not of particular use to determine "what bore the choke is for".
The bore end says What Barrel This Fits.
The constriction end says How Much Choke.

_________________
I don't always venture out into the sub-freezing darkness, but when I do, it is hunting season, and I carry a Browning. Stay hungry my friends.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 47MolineRTU, Bad English, Bakerloo, bani, Bar Nuthin, BENFISH, BG1187, Bing [Bot], Bladeswitcher, Bobcat Welding, BWilson, Byron Whitlock, CapHillSkt, claysman steve, cleboje, Cooper4141, ctlawyer, Curly N, dallen749, dannyd93140, Dbl Auto, Denver1911, dhb66, dpe2002, drawdc, EricB, Ernest T, fishrising, Fitasc2, Google [Bot], Google Adsense [Bot], gthudspeth, Husker90, JacksBack, JerseyJim, jims, jml, johnnie g, Kentuckycook, kjs, kyskeet, Lam101, LT67, Mark Pfeifer, Maser, MAX & TOBY, Mike McAlpine, misterdom, msmith, mwike, noweil, Old No7, Oldfarmer2, OldStufferA5#1911, oneeyednine1029, osunut, oyeme, painter*, PeterAVanTassell, pitandremington, Remduck1, rickeroo, Riflemeister, rjm0430, Road Man, Rooster booster, ruggedsportsmen, Saltydog055, shacked, shaynec, shootandfish2, Shotguncockersp, Skeet_Man, Solid Hit, Starstorm, Steeler [Crawler], swampcreek, The Drake, Tidefanatic, TMWilsoniv, Tonybart55, Upland Quest, Vette Jockey2, Westender, Wild Skies, xpert16, zxcvbnm


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice