| Shotgunworld.com https://www.shotgunworld.com:443/bbs/ |
|
| Early Beretta 302 slip in choke tubes https://www.shotgunworld.com:443/bbs/viewtopic.php?f=2&t=528614 |
Page 1 of 1 |
| Author: | ABIGFOOTZ [ Sat Feb 20, 2021 11:16 am ] |
| Post subject: | Early Beretta 302 slip in choke tubes |
Acquired a early Beretta 302 barrel with slip in choke tube system with cap and no tubes so am looking for 1 or more tubes.Thanks for help here.Have contacted Tru-Lock and no luck.Jeff's and no luck.Coles with no luck. |
|
| Author: | RandyWakeman [ Sat Feb 20, 2021 2:00 pm ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
ABIGFOOTZ wrote: Acquired a early Beretta 302 barrel with slip in choke tube system with cap and no tubes so am looking for 1 or more tubes.Thanks for help here.Have contacted Tru-Lock and no luck.Jeff's and no luck.Coles with no luck. Trulock can custom make your chokes. It is not a stock item, there likely is a set-up fee . . . Conman wrote: Seamus is right. I bought a nice A302 a few years ago and I contacted George Trulock. He set me up with a nice set of chokes and the service was very rapid and the price was fair.
Good luck........... |
|
| Author: | ABIGFOOTZ [ Sat Feb 20, 2021 5:15 pm ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
Thank You for the fast reply's.If I have to go to customs will pick up another barrel with mobile style or go with a conversion to thin wall.To bad these old style are obsolete as other than being a little unsightly compared to newer style they are handy. |
|
| Author: | ABIGFOOTZ [ Tue Feb 23, 2021 6:34 pm ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
Coles had a full choke slip in tube for this early Beretta.Made my week and 15.00 + shipping.Thanks Again Cole's for Great customer service. |
|
| Author: | Mike Foley [ Tue Feb 23, 2021 7:07 pm ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
I have seen them from time to time on eBay. |
|
| Author: | woodcock1 [ Wed Feb 24, 2021 8:35 pm ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
Here is a link to a full set of 12 gauge drop in tubes. They are form Europe, but I think they ship internationally. http://www.shotgunchokes.co.uk/shop/pro ... s&id=30462 I recently sold my 12 ga. 302 with a full set of tubes, but have the 20 gauge 302 with the drop in type tubes still. |
|
| Author: | ABIGFOOTZ [ Thu Feb 25, 2021 9:57 am ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
Thank You I will check out the ones in Europe. |
|
| Author: | ChiTime [ Fri Apr 02, 2021 8:43 am ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
Another source from Europe, ok'd for steel shot too. https://store.geminichokes.com/en/produ ... e-12-gauge |
|
| Author: | ABIGFOOTZ [ Fri Apr 02, 2021 9:18 am ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
Got choke tubes from UK as woodcock1's link.Thank You for link.Good for steel shot also and work great.The one from Coles turned out to be for a 20 Ga.Put it on Ebay.Great website here and Thanks Again for all the help. |
|
| Author: | simslax [ Fri Apr 02, 2021 9:26 am ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
Europe seems to be the most likely source for those older A 302 drop in tubes. I recall the 20 gauge tubes were harder to find. |
|
| Author: | ChiTime [ Fri Apr 02, 2021 10:09 am ] |
| Post subject: | Re: Early Beretta 302 slip in choke tubes |
ABIGFOOTZ wrote: Got choke tubes from UK as woodcock1's link.Thank You for link.Good for steel shot also and work great.The one from Coles turned out to be for a 20 Ga.Put it on Ebay.Great website here and Thanks Again for all the help. That's good to know the UK ones are okay for steel - wasn't immediately clear to me from their website, so good insight - thanks! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|