3 bullet drill

JacksBack · **Posted:** Mon Feb 25, 2019 1:02 pm

There's about 4 feet between the two target dots -- but to be clear there's no math or logic to that one, it was just a way for me to practice mounting "stupid in front" of a target.

Gil Ash · **Joined:** Mon Aug 31, 2009 9:26 am **Posts:** 2140

Learn the sight picture

Watch the clay Kill Shot Reviews in Knowledge Vault

Preload the video you want your brain to execute before you close and call pull.

Predict
Execute
Repeat

Predict
Execute
Repeat.

Galaxy Flyer · **Posted:** Sun Jan 03, 2021 1:59 pm

JacksBack wrote:

Gil Ash wrote:

Jack can I pledgurize this post?

Of course LOL -- it all started with your concept!

PS: FTR, mine isn't quite as pretty as Jerry's -- I just stuck my dots on the inside of my garage door which happens to be 7 yards from my gun safe (

) And didn't bother with every hour, instead doing the 45-degree angles in-between at 1:30, 4:30, 7:30 and 10:30.

PS: I also added what I call my "long crosser" targets way out to the left and right -- I use them to practice mounting way in front in anticipation of letting big targets come to the gun -- note that I usually mount to the 9 or 3 o'clock-dots while I'm looking at these targets. Not sure this latter does anything to really help, but I do tend kill a pretty goodly portion of big, long crossers

The inside of my garage door for posterity:

Maybe I misunderstood something, but what is the radius of the circle of circles from center target? On your door, it looks larger than 12”.

JacksBack · **Posted:** Mon Jan 04, 2021 6:54 pm

Galaxy Flyer wrote:

Maybe I misunderstood something, but what is the radius of the circle of circles from center target? On your door, it looks larger than 12”.

Nope, that's a 12" radius -- measuring from center orange dot to the black outer dots, so total diameter of the circle inscribed by the black dots is about 2 feet. Hope that helps.

Galaxy Flyer · **Posted:** Wed Jan 06, 2021 10:22 pm

Yes, it does. I went out and measured by garage door, saw how the dots worked. I’ve marked up the back of a patterning sheet to use. Thanks much.

Gil Ash · **Joined:** Mon Aug 31, 2009 9:26 am **Posts:** 2140

galaxy Flyer.......

anything to report?

3 bullet drill

Who is online