Perazzi trigger

claysman steve · **Posted:** Sun Oct 25, 2020 9:22 pm

Have any of you guys experienced intermittent extremely light trigger pulls? I have an MX-8 with coil springs set to 3.5#. Recently I have been having problems with the gun firing before I am fully mounted. It just seems to go off just slightly before I am ready to fire. I thought it could be me squeezing as i finish my mount, however I do not have this problem when I shoot my ZOLI or other guns for that matter. Could the hammer just barely be engaged with the sear? It seems to be occurring more frequently. What are your thoughts? Thanks, Steve

Tvbh40a · **Joined:** Mon Dec 05, 2016 6:05 am **Posts:** 484

Have you checked your trigger pulls with a gauge to see if they are still at 3.5#?

mpolans · **Joined:** Sat Nov 30, 2013 8:21 pm **Posts:** 697

I'm guessing you have some parts that are worn and need replacing. I've heard good things about Don Rackley at http://www.donrackleygunparts.com/ .

claysman steve · **Posted:** Tue Oct 27, 2020 7:46 pm

Yes, I have checked it several times and it always comes up 3.5#. It starting to bother me a bit I will have to get in touch with Mr. Rackley. Thanks, Steve

fal777 · **Posted:** Wed Oct 28, 2020 7:50 am

Highly recommend Don Rackley
Attention to detail and results are great

Don Rackley · **Joined:** Fri Apr 26, 2019 5:57 am **Posts:** 20

Clayman,

Please call me Don.....

I would be interested to know what you trigger pulls are now, my guess is that are between 3.0 and 3.5 lbs.

I can reset then for you. Feel free to call me on 972-839-0205 and we can discuss. I am traveling to a couple of tournaments now, but I do believe I can make your trigger better.

don

claysman steve · **Posted:** Sun Nov 01, 2020 6:58 pm

Will do. Thanks Don

Perazzi trigger

Who is online