Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

Perazzi MX2000S Trigger Group Removal
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=244&t=510714
Page 1 of 1

Author:  oldnnp [ Wed Apr 15, 2020 7:43 pm ]
Post subject:  Perazzi MX2000S Trigger Group Removal

https://youtu.be/7hjjpnrrsvI

Author:  cheecho1960 [ Wed Apr 15, 2020 7:56 pm ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

"Like"

Author:  sera [ Thu Apr 16, 2020 11:49 am ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

Oliver--you have more guts than sense. If I tried this , those little parts would have fallen on the floor and rolled under something.

How you been ???

Last year I bought an MX 2000 that came w/ a drop out trigger and coil springs. My 1st set like that. Light gun , easy to shoot.

Author:  Skeet_Man [ Thu Apr 16, 2020 11:51 am ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

That's EXCELLENT information, I had no idea the "fixed" trigger Perazzis were like this, make it much more attractive for me to purchase one down the line.

Author:  winmod21 [ Thu Apr 16, 2020 12:09 pm ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

When I see stuff like this I always marvel that a person had the smarts and creativity to design and build it. Pretty remarkable for a mechanism we tend to take for granted.

Author:  oldnnp [ Thu Apr 16, 2020 2:02 pm ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

Sera, I am doing fine. I have a MX8 with externally selective coil spring trigger group. Will not need leaf springs again! Mr. Perazzi was truly a genius when you look at the design of the MX series of guns.

Oliver

Author:  sera [ Thu Apr 16, 2020 2:09 pm ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

Yes. I have a leaf spring group that fires bottom/top , no selector. Another w/ a selector and now this coil spring gun w/ a selector...all three 12g plus plus an MX 20.

The three drop out trigger groups each fit in any of the other guns. Nice to have a "spare" group to carry around and not worry about.

Ann has a "Elle" ladies model w/ the fixed trigger group like you show in the video.

All this Italian iron and no where to shoot. Dang.

Author:  oldnnp [ Thu Apr 16, 2020 2:12 pm ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

Too much time on my hands and you see what happens! I start taking things apart!!

Oliver

Author:  mpolans [ Thu Apr 16, 2020 5:09 pm ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

Good video. Thanks!

Author:  flyway3 [ Sat May 09, 2020 2:50 am ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

thanks for sharing

Author:  BREAKEMALL [ Sat May 09, 2020 8:34 am ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

Thanks for the video.
Best,
Breakemall
Western North Carolina

Author:  castnblast2 [ Sun Nov 08, 2020 7:45 pm ]
Post subject:  Re: Perazzi MX2000S Trigger Group Removal

Thank you, I have a MX8 and TM1 with removeable triggers and just bought a HTS so your video was very interesting. The Perazzi Trigger be it removeable or fixed is truly a marvel of gunmakers engineering.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/