Roll Call: Stevens Model 335 Serial Numbers

Mikegray · **Joined:** Sat Dec 30, 2017 4:22 pm **Posts:** 1

J Stevens Arms & Tool Co. serial number 66615 model 335, 16 gauge side by side.

Robust · **Joined:** Fri Sep 14, 2018 10:39 am **Posts:** 1

Hi, Have a Stevens 12 ga. model 335 serial# 46731
Purchased at a flea market. Don't know any history of it. Hope this is helpful

Ryan1972 · **Joined:** Mon Oct 07, 2019 10:07 am **Posts:** 1

16 gauge with serial #33488- J Stevens Arms and Tool.

shot to heck · **Joined:** Sun Nov 03, 2019 10:37 am **Posts:** 2

Here is one for ya Stevens model 335 Stevens Arms Co 12 GA SXS Ser# A2010. Got it from a relative of mine in 2016. And yes that is an (A) at the front of the Ser#!

shot to heck · **Joined:** Sun Nov 03, 2019 10:37 am **Posts:** 2

If Stevens did not make any commercial guns from 1915 to 1920 why is there a copy of the 1918 Stevens sales catalog for sale on gun broker??

Researcher01 · **Posted:** Sun Nov 03, 2019 12:07 pm

FWIW I have J. Stevens Arms Co. paper dated 1917, 1919 and 1920, and a J. Stevens Arms & Tool Co. General Catalog No. 54 with a J. Stevens Arms Co. paste-over label. Also, a couple of undated catalogs which from their content might well be from that period.

JBParker · **Joined:** Tue Dec 17, 2019 5:11 pm **Posts:** 1

I own a 335, 12 gauge, serial number 35974. My dad bought it somewhere in the last 1960’s in Minnesota, had the barrels shortened, legal length, and used it primarily as a grouse and pheasant gun.

drayks · **Joined:** Tue Dec 17, 2019 12:04 pm **Posts:** 1

Hello, first post here. Inherited a Model 335 12 gauge and would like help identifying what year of manufacture. Side plates stamped "J Stevens Arms Company", "MODEL 335" on action bottom, and serial number A127XX on lower receiver. "12 GAUGE" stamped on left barrel. Black hard plastic butt plate with horizontal grooves and plastic plate on end of pistol grip. No markings as to choke type. The gun seems to have a tight lockup and I would think about shooting it with 2 3/4" shells. Any idea about shotgun vintage? drayks

Kiyas Dad · **Joined:** Mon Dec 19, 2016 3:09 pm **Posts:** 10

Found another 335 today. It's a 16 GA, serial # 533XX, marked "J. Stevens Arms & Tool" with 26" barrels, "Pat'd Mar 19, 1907". On another site it's said to have been mfg between 1912 & 1915. Pretty decent survivor. Tight, no dents, no stock wobble, barrels 50% blue turning plum, 50% color case viewable. Checkering barely viewable but no serious flaws to wood. Low brass can killer. Lots of cans around now that I'm told to stay home by the CDC. Praise God, I have acreage in the woods!

frisby.ray · **Joined:** Sat Jul 11, 2020 3:45 pm **Posts:** 1

SN on my J Stevens Model 335 is 925XX but don't know the history either. Thanks.

EuroMan · **Joined:** Sun May 17, 2009 11:43 am **Posts:** 415

Not all of these are Model 335 but maybe relevant.

Model 375, J. STEVENS ARMS & TOOL CO., 12GA #4920

Model 335, J. STEVENS ARMS & TOOL CO., 12GA #42885

Model 345, J. STEVENS ARMS & TOOL CO., 20GA #3398

Model 345, J. STEVENS ARMS & TOOL CO., 20GA #5140

John

Corbitto · **Joined:** Mon Nov 16, 2020 1:02 pm **Posts:** 1

I have the stevens arms and tool co. model 335 serial number is 31145. is this mean its 1910-15 range. hard to find info on this. its a double barrel and not sure if its 12 or 16 gauge. is the best way to measure the opening or try a 12 gauge see if it fits? it was my great gramps gun. It’s a 28” Barrel and I couldn’t fit a 12 gauge round so I assume 16? have had it in a safe for 20 years

Jhbrad1 · **Joined:** Sat Dec 12, 2020 11:41 am **Posts:** 5

Hi all - this is my first post here. I have purchased a Model 335 12 gauge from an auction then found this forum on Google. The gun was supposedly in a collection in St. Louis. It is worn and no longer blue, but an interesting mottled case hardened look. The side plates are stamped with a scrolling banner inside a flowing foliate design that says "J Stevens Arms Company" with "Chicopee Falls, Mass. U.S.A." below that in the banner. The action bottom says "MODEL 335." The serial number 9337 on the lower receiver has uneven spacing and an "A" precedes it on a small angle on a slightly lower line, so it appears hand stamped. At the rear of the mechanism under the safety tang it also has A9337 which again looks hand stamped due to it being on an uneven line. The barrels are 18 3/8" which I believe were cut down. The serial on the plate mechanism under the barrel is 90056. It has a black hard plastic butt plate that says "Stevens" in a scroll that forms an "S" with horizontal grooves. The pistol grip ends with a black plastic plate rather than the rounded butt. It seems to have a tight lockup, but the firing pins interfere with the ejector mechanism. There are two screws missing. There was a screw holding a trim piece between the barrels about 16" from the mechanism, and another missing from the right side plate. Does anyone have an assembly drawing for this mechanism?

doowit · **Joined:** Tue Jan 19, 2021 12:20 pm **Posts:** 1

picked up a nice 335 16 ga (my favorite)couple weeks ago.$275 maybe a little high,but i like it.it was flooded with polyuratrane but i stripped it off,gently recut the checkering and tru oiled.not a lot of imfo out there that i could find on this model,yours was the best.thank you.anyhow if you still want more numbers mine is 993xx.thanks again for the imfo.doow

glennmac · **Joined:** Sun Mar 28, 2021 7:24 pm **Posts:** 1

Got another 335 for ya. 12 ga. Given to me by a friend and mentor really, back in the 70's.
# 436xx. This one is in Vermont.

Roll Call: Stevens Model 335 Serial Numbers

Who is online