ShotGunWorld Shotguns

It is currently Sat Apr 17, 2021 9:32 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Cynergy CX not firing second barrel after live first shot
PostPosted: Wed Apr 07, 2021 8:31 pm 
Utility Grade

Joined: Mon Nov 04, 2019 5:54 am
Posts: 15
I think I have read some issues with a Cynergys"shooting open" if the Over barrel is fired first....making the Under barrel trigger pull....feel as if the sear was no longer engaged. Unfortunately, I am asking this question because I had an issue this weekend that seemed odd. I switched my selector from U to O and shot a longer bird of an incoming pair (IC in the O barrel and SK in the U barrel). After I missed the first bird horribly and began salivating to shoot the close one....the gun didn't fire. As a matter of fact, the trigger was as if the pin had already dropped...but the primer was untouched. I tried an additional pair...and same results, except I hit the first bird. Removed both shells from the gun...empty hull and loaded round and both barrels dry fired fine. Switched the selector to U and both barrlels functioned perfectly. I am new to Browning and this is a used gun, but it seems to be in good shape. I have shot a round of .410 with it....with companion tubes...and it worked flawlessly...but I shot U/O exclusively. Does anyone have any suggestions? I desperately do not want to send it back to Browning...as I attempted to have them replace the Duratouch inserts in the composite stock because they were sticky...and they called me and said they weren't sticky to them. So I now have a sticky gun that won't fire the second barrel...and I don't trust the company to fix the issue....and if they do, it will be after the sporting clays summer is over....and this is the gun that my 11 and 14 year old shoot 28 gauge and 410 with (one set of sidekicks and one set of companion tubes). So, any help with a recommendation of a decent gunsmith who doesn't mind working on these would be appreciated. If this issue has been addressed before, I couldn't find it quickly and would be happy to read that solution so that noone would have to go back through it all... And I have removed the stock and cleaned the trigger mechanism to the point that there is absolutely no specks of dirt/powder/dust anywhere.... Thanks. Tad




Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Thu Apr 08, 2021 8:17 am 
Tournament Grade

Joined: Sun Oct 31, 2010 6:51 pm
Posts: 204
PM sent to you.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Thu Apr 08, 2021 1:21 pm 
Utility Grade

Joined: Mon Nov 04, 2019 5:54 am
Posts: 15
Didnt get a PM......☹️


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Thu Apr 08, 2021 5:50 pm 
Tournament Grade

Joined: Sun Oct 31, 2010 6:51 pm
Posts: 204
PM sent again.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Sat Apr 10, 2021 6:57 pm 
Tournament Grade

Joined: Mon Jan 23, 2017 9:27 pm
Posts: 175
Sorry to hear about your trouble. My CX and my friend's CX dont have any problems.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Sun Apr 11, 2021 8:22 pm 
Utility Grade

Joined: Mon Nov 04, 2019 5:54 am
Posts: 15
UPDATE....
After talking to another SW member who had similar problems, I took the sticky, 1 shot Cynergy back out today to try to replicate the problem...and take notice to the top lever position against the serial number (under the top lever). The gun did not disappoint. First pair fired as U/O, everything worked fine. Second pair with O/U.....was U only....with “floppy”, fired feeling, trigger on U barrel.....but I noticed the top lever had shifted way to the right. I opened the action, closed the action, selected “U”, and it fired. So it would seem that something is causing the gun to “open” after firing the Top (Over) barrel. Someone mentioned possibly a weak top lever spring.....Seems it wouldnt be my luck to have such an easy fix....

Or, I could have my boys shoot it only with companion tubes in sub gauges....and maybe the recoil wont be enough to open it on the “O” barrel. Thoughts???


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Tue Apr 13, 2021 12:24 pm 
Tournament Grade

Joined: Sun Oct 31, 2010 6:51 pm
Posts: 204
Tad -- The next time it fails to fire the second barrel, do this.
Do not open the action after it fails to fire the second barrel.
Instead, move the barrel selector switch to the other barrel.
There is a good chance that the second barrel will now fire.

Try this and please report back what happens.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Tue Apr 13, 2021 8:09 pm 
Utility Grade

Joined: Mon Nov 04, 2019 5:54 am
Posts: 15
I actually did try that...and it did not fire. That's when I remembered you telling me to look at where the top lever indexed over the serial number. On the subsequent firing of the top barrel, I looked at the lever and it was significantly to the right.....and the action was able to be opened without moving the lever much at all.....


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Tue Apr 13, 2021 8:37 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Sun Jul 27, 2003 3:37 pm
Posts: 19595
Tadman1 wrote:
I actually did try that...and it did not fire. That's when I remembered you telling me to look at where the top lever indexed over the serial number. On the subsequent firing of the top barrel, I looked at the lever and it was significantly to the right.....and the action was able to be opened without moving the lever much at all.....


Sounds like it may need a new top lever spring, but it could be something else. I'm not that familiar with the Cynergy, but if it's like the Citori, the locking bolt is near the bottom of the standing breech.

I want you to clean this locking bolt CLEAN. That means using solvent followed up by rubbing alcohol. Then I want you to CLEAN the engagement recess in the rear of the barrel monobloc in the same manner so that there is zero oil left in there.

Once you've got the locking parts CLEAN, try shooting the gun again. If that doesn't fix it, then you'll likely need a new top lever spring. And if that doesn't fix it, then you may need a new locking bolt. Generally, these guns don't need a new locking bolt until many tens of thousands of rounds have been fired through them, but since it's a used gun, you don't really know how many rounds have been fired.

My guess is that a top lever spring will fix the problem. Let us know.

_________________
Please post For Sale items in the proper Classified section.

Semi-Auto Classifieds is ONLY for Complete Semi-Auto shotguns.
Over/Under Classifieds is ONLY for Complete O/U shotguns.
Items other than a complete shotgun go in OTHER Classifieds.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Wed Apr 14, 2021 2:45 pm 
Tournament Grade

Joined: Mon Jan 23, 2017 9:27 pm
Posts: 175
Is your CX composite or wood? Mine and my buddy’s are wood and don’t have this problem.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Fri Apr 16, 2021 1:50 am 
Utility Grade

Joined: Mon Nov 04, 2019 5:54 am
Posts: 15
Ulysses,
I will try all of that. I have already ordered a spring kit from jnp but will clean the locking bolts really well first. Thanks for the reply.

Wowzer,
It is a CX...hence the “sticky” issue. I doubt it is stock related, but at this point, if changing the top lever spring and cleaning the locking bolts doesn’t work, I may consider buying a wood forearm and buttstock for it.....that would at least cure the ‘stickiness’. Browning wanted $650 to replace the stock, I believe. And that was more than I wanted to spend....for that issue. I contacted them on whether this part was warranty related and they said I could send it back to have it looked at....but otherwise I could buy the part from them and then take it to a local gunsmith. The DIY on the cynergy receiver teardown doesnt look terribly difficult. I think I will try it myself if cleaning the locking bolts doesnt work....Thanks for the reply.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Fri Apr 16, 2021 9:02 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Sun Jul 27, 2003 3:37 pm
Posts: 19595
Just one follow-up point I'd make. After doing the thorough cleaning of the locking bolt(s), be sure to then lubricate lightly with gun oil or Breakfree CLP. You don't want to leave them dry for any length of time.

I still think the problem is the top lever spring, but just for insurance, a good cleaning of the locking system wouldn't hurt anything.

_________________
Please post For Sale items in the proper Classified section.

Semi-Auto Classifieds is ONLY for Complete Semi-Auto shotguns.
Over/Under Classifieds is ONLY for Complete O/U shotguns.
Items other than a complete shotgun go in OTHER Classifieds.


Top
 Profile  
 
 Post subject: Re: Cynergy CX not firing second barrel after live first sho
PostPosted: Fri Apr 16, 2021 2:49 pm 
Moderator
Moderator
User avatar

Joined: Fri Nov 04, 2005 11:15 am
Posts: 23333
Location: Knoxville, Tn area Nyuck, Nyuck
Tadman1 wrote:
Ulysses,
I will try all of that. I have already ordered a spring kit from jnp but will clean the locking bolts really well first. Thanks for the reply.

Wowzer,
It is a CX...hence the “sticky” issue. I doubt it is stock related, but at this point, if changing the top lever spring and cleaning the locking bolts doesn’t work, I may consider buying a wood forearm and buttstock for it.....that would at least cure the ‘stickiness’. Browning wanted $650 to replace the stock, I believe. And that was more than I wanted to spend....for that issue. I contacted them on whether this part was warranty related and they said I could send it back to have it looked at....but otherwise I could buy the part from them and then take it to a local gunsmith. The DIY on the cynergy receiver teardown doesnt look terribly difficult. I think I will try it myself if cleaning the locking bolts doesn't work....Thanks for the reply.


Not sure that the action is the same for the Wood VS the Plastic stocks.
Replace the top lever spring and go shoot it before you waste any time or money fretting about anything else. I bet you will be fine.



_________________
if you love the ole USA https://youtu.be/f22JcsKmnYg If you were Military, enjoy

Let us endeavor so to live so that when we come to die even the undertaker will be sorry.
Mark Twain


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 1911-A1, 1casual, 2LegsBetter, Bill M., Bing [Bot], birdhunter39, Bobcat Welding, bucksnort06, CuriousGeorge, danjin85, elpato, EricB, F*W*F, flintsteel, Flyingtargets!, fredvon4, FTRPILOT, Google [Bot], Google Adsense [Bot], Jason Johnson, Keperkey, kyskeet, LMunsterlander, Mark Pfeifer, MarkHodson, May, McFarmer, mechtechbob, Mule Driver, OBH Gun Club, ohio mike, Oldman1949, oneounceload, pete blakeley, pintail_drake2004, railroad, randyflycaster, reo, spoonbill82, Stk218, Tennessee Cattleman, Tom Shaffer, Tommix, troybmorrison, Upland Quest, valencman, VictorGK, Wchadw, WGB, Wildwood, wttex, ysr_racer


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice