ShotGunWorld Shotguns

It is currently Fri Jul 03, 2020 3:42 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sat Jun 13, 2020 9:07 pm 
Utility Grade

Joined: Thu May 28, 2020 11:14 pm
Posts: 11
RandyWakeman wrote:
Polaris49 wrote:
I Just purchased a beautiful Browning Citori 725 Trap Combo with 32" and 34" barrels. The former owner tells me the gun does not like Federal shells in the lower barrel and will often fail to fire them. The problem reportedly is not present in the upper barrel which shoots Federals just fine.


It isn't rational to compare Wally World promo loads to AA's. Federal makes more shotshell loads than any ammo manufacturer in the world. Have you tried any Gold Medal Grand loads? That's a more reasonable comparison-- and you won't have any problems.



I haven't tried any Gold Medal Grand loads but will check them out. I took the gun out today and gave it a good workout and it shot flawlessly with everything I put in it. Thanks




Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sat Jun 13, 2020 9:26 pm 
Utility Grade

Joined: Thu May 28, 2020 11:14 pm
Posts: 11
captjsjr wrote:
I’ve never had this “ light primer strike “ issue on any of my Brownings and Have used countless manufacturers shells. So are the shells really the problem ?



I don't really know. I just bought the gun and the previous owner told me the lower barrel would FTF sometimes with Federals. I haven't been able to reproduce the problem with any factory loads, (including Federals) but did have a light primer strike once with a reload which was likely my fault.
I shot about 4 boxes of shells today (Federals, AA's Fiocci & Estate) with no problem at all. Like yourself, I've never had problems my other Brownings. I'll just keep shooting it and see what happens. Thanks


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sun Jun 14, 2020 8:09 am 
Limited Edition
User avatar

Joined: Tue Apr 17, 2018 2:24 pm
Posts: 378
Location: South Central Pennsylvania
Polaris, get a good magnifying glass and check the pins, then check from time to time to see if anything is developing...I know, seems like overkill, but then you know if you do or do not have any problems.
I had issues with Rio primers and worked my way through my stock of shells that way; swapped out the beat up stock pins for J&P, then kept an eye on them.

_________________
Citori 725 Skeet 12/28"


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sun Jun 21, 2020 9:44 pm 
Utility Grade

Joined: Thu May 28, 2020 11:14 pm
Posts: 11
28ga. wrote:
Polaris, get a good magnifying glass and check the pins, then check from time to time to see if anything is developing...I know, seems like overkill, but then you know if you do or do not have any problems.
I had issues with Rio primers and worked my way through my stock of shells that way; swapped out the beat up stock pins for J&P, then kept an eye on them.



Thanks 28ga., I'll do that. Checked them out after my last outing and they looked to be in good shape. I've also ordered a spare set of firing pins from J&P so I'll be ready in case something does develop.


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Mon Jun 22, 2020 6:23 am 
Tournament Grade

Joined: Sun Aug 18, 2019 8:21 pm
Posts: 118
Location: NJ
I have tried J&P pins/spring kit, nice put together kit but $58


Browning Pins and springs very inexpensive from Browning -lower pin from Browning $6.50, return spring $2.50 upper pin $5.50, retaining pins $2.25 and they match Browning spec.

J&P also has a pin kit, Fire Pin kit same stuff except you dont get retaining pins $48.00

Best just to avoid shells that have the harder primers, Estates, Fiocchi, and some others, check your primers and look for burn through's, they take there toll on the pin. no burn through no problem.

There is another post in here that has fire pin specs that protrude past breech, its a large spec, Im currently experimenting with the length, the spec for a 725 was 40 to 55 thousands, thats a large spec, I currently have it at 48 thousands and been having no problems so far, more updates in future

_________________
Browning 725 HR Adjustable 32"12ga
Benelli SuperSport 32"12ga
Remington 1187SP 32"12ga
Winchester Model 59 Winlite 30"full 12ga
Ithaca Goose Gun Bolt action 36"12ga
Pride of Spain DB 10ga
Mossberg 410 ga
NRA Life Member since 2000


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sat Jun 27, 2020 6:46 pm 
Field Grade

Joined: Sun Oct 08, 2017 6:26 am
Posts: 22
We rented a 725 on the clays course today. Too many ftf on the bottom barrel. We were using Federal Top Gun. Off center pin strike and drag.


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sat Jun 27, 2020 7:51 pm 
Tournament Grade

Joined: Thu Oct 11, 2018 4:26 pm
Posts: 119
Location: NC
Interesting; I had not heard of this. I purchased a lightly used 725 in December from a shooting buddy. I keep a spreadsheet of every round fired out of my clays guns. I now have 700 rounds through this one - Rem Gun Clubs, Winchester Xtra lite target, Rem Clay & Field, Herters, and Federal. No issues so far.


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sun Jun 28, 2020 5:21 am 
Presentation Grade

Joined: Sat Feb 13, 2016 6:28 pm
Posts: 900
Location: Skeet and Trap Fields
sturley187 wrote:
We rented a 725 on the clays course today. Too many ftf on the bottom barrel. We were using Federal Top Gun. Off center pin strike and drag.


Did you inspect it for damage to the pin? Past use of hard, brittle primers very likely had already damaged the firing pins, shortening them. Never heard of pin drag complaint before. The bottom pin has a rebound spring to retract the pin. Maybe that was damaged or missing. With range guns you have no idea how they have been maintained, used or abused.


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sun Jun 28, 2020 5:43 am 
Field Grade

Joined: Sun Oct 08, 2017 6:26 am
Posts: 22
We didn't spend any time diagnosing it since it was a rental. We just used the Beretta 694 and let the range manager know.


Top
 Profile  
 
 Post subject: Re: BROWNING CITORI 725 AND FEDERAL SHELLS
PostPosted: Sun Jun 28, 2020 7:11 am 
Tournament Grade

Joined: Sun Aug 18, 2019 8:21 pm
Posts: 118
Location: NJ
Top guns shells are NOT the problem, The fire pin on lower barrel probably eroded/pitted away from previously shooting other brands, and having a burn through condition, 2 every 100 shots. once the pin has been eroded its not going to grow back, It will fire some shells and others give you light strikes, the problem occurred with different shells, possibly Estates, Winchester Universal any shells that use Hard Primers, (possibly Cheddite primers)?



_________________
Browning 725 HR Adjustable 32"12ga
Benelli SuperSport 32"12ga
Remington 1187SP 32"12ga
Winchester Model 59 Winlite 30"full 12ga
Ithaca Goose Gun Bolt action 36"12ga
Pride of Spain DB 10ga
Mossberg 410 ga
NRA Life Member since 2000


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 870Slugger, apexclays, Banshee, Bing [Bot], Bird Guide, Blackdog56, brdslayr, BriderLV, Cubby, dolphin717, Drew Hause, EricB, Ga. Skeet, Galaxy Flyer, goodemachine, Google [Bot], Google Adsense [Bot], Google Feedfetcher, greengael, Gunsite Guy, harvard, HenryVac, hopper810, I like pie, Jason Johnson, jdwithsc, krimmie, Litespeed, lossking, maggs01, Major146, mddan, mikecolorado, Modi, Okinawa, petsakias, Rcflyer12, Riflemeister, rmiddlemas, Saltydog055, Scardog7, scott12v, sturley187, Tidefanatic, TPerk92, twohigh, Wheelspin, YevetS


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
© 2017 Carbon Media Group Outdoors    - DMCA Notice