ShotGunWorld Shotguns

It is currently Sun Sep 27, 2020 8:40 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: 11-48 28 gauge recoil tube
PostPosted: Fri Jan 31, 2020 8:41 am 
Field Grade

Joined: Mon Sep 07, 2015 7:13 pm
Posts: 30
Fellows, I have a 11-48 in 28 ga. that has a recoil spring tube that the spring has worn completely through and will not function correctly anymore. Has anyone ever run into this problem and what is the fix? Thanks, Marcus




Top
 Profile  
 
 Post subject: Re: 11-48 28 gauge recoil tube
PostPosted: Sun Feb 02, 2020 10:31 pm 
*Proud to be a*
*Proud to be a*

Joined: Tue Mar 30, 2004 10:25 pm
Posts: 2393
Location: NW, CT
Could you be more specific. What is "worn completely through", the magazine tube or the action tube in the stock?

Jim


Top
 Profile  
 
 Post subject: Re: 11-48 28 gauge recoil tube
PostPosted: Mon Feb 03, 2020 1:09 am 
*Proud to be a*
*Proud to be a*

Joined: Sun Feb 18, 2007 11:22 am
Posts: 8927
Location: Rochester, NY
Spare tubes are long gone.

Both the stock and mag tube are different than their 1100 counterparts, you might be able to adapt either to work but it'd probably be easier just to fabricate one at that point.

If it's the stock tube, you should be able to remove one from a 12 or 16 gun, which would be cheaper to buy, if it's the mag tube you're in a bad spot and one will need to be fabricated.

Both are brazed in place, so this is not a DIY job, and you'll need to weigh the cost of aquiring/fabricating the parts and subsequent gunsmithing and rebluing against the value of the gun.

_________________
S3 Smingler Shotgun Sports
Ian Smingler
585-613-8098
[email protected]
http://www.sminglershotgunsports.webs.com

Manufacturer of Custom Brass Barrel Weights for over/under, top single, and unsingle shotguns.


Top
 Profile  
 
 Post subject: Re: 11-48 28 gauge recoil tube
PostPosted: Mon Feb 03, 2020 1:11 am 
*Proud to be a*
*Proud to be a*

Joined: Sun Feb 18, 2007 11:22 am
Posts: 8927
Location: Rochester, NY
Here's a stripped action I found that you could potentially rob the stock tube off of:

https://www.gunbroker.com/item/855309327

_________________
S3 Smingler Shotgun Sports
Ian Smingler
585-613-8098
[email protected]
http://www.sminglershotgunsports.webs.com

Manufacturer of Custom Brass Barrel Weights for over/under, top single, and unsingle shotguns.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 20grouse, 92dawg, a_mans_worth, Big Midwest, BigDeeeeeeee, BillJ61, Bing [Bot], Bird Guide, Bladeswitcher, BrandonShaver, bullseye-69, casonet, cbradford, Cccollin545, ccL, ChrisLunker, Cooper4141, Curly N, DanG, DblXX, dcr5468, dickgtax, dmartinb, dogdstr69, doppelflinten, EricB, Ezra Smack, FL-Shooter, FlashTX*, FTRPILOT, Gadwall, Google [Bot], Google Adsense [Bot], H2OFowler247, hass28, hehunts, jaguarxk120, JimJsa, Jta5er, Kentuckycook, Keperkey, Kingwoodsman, Magnett, Majestic-12 [Bot], Mark Pfeifer, McFarmer, ohio mike, oldshotty, oldtechshooter, oneounceload, pitandremington, POINT3R, Rebel_Ray, rickeroo, Road Rat, Rockett0, Rooster booster, SAMHERN569, saskbooknut, Schnurb, shootandfish2, smkilcz59, soupsandwich, Southernfried, stubblejumper, Tex68W, Thomas60, Tidefanatic, TimNichols, torybird, trdjohn, TrentJAX640, trevijazz, treys22, wjonessc, zxcvbnm


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice