Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

Remington 3200..What are the chances
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=55&t=519302
Page 1 of 1

Author:  BillJ61 [ Mon Sep 21, 2020 6:56 am ]
Post subject:  Remington 3200..What are the chances

I just bought a new..never shot..3200 trap. What are the chances
Of finding a skeet barrel for it...I shoot both.. Gun now has 50 shells thru it.

Secondly, all I've heard is..you can't find parts from folks at range..What fails on this gun,commonly ?

Author:  toptechX6 [ Mon Sep 21, 2020 7:18 am ]
Post subject:  Re: Remington 3200..What are the chances

See this link, one item looks close to what you want, good luck! {hs#

http://www.schaefershooting.com/3ae3ab49-ca/remington-3200.htm

Author:  jjas [ Mon Sep 21, 2020 10:10 am ]
Post subject:  Re: Remington 3200..What are the chances

This place is showing some parts in stock...

https://www.gunpartscorp.com/gun-manufacturer/remington/shotguns-rem/3200

As far as problems go...

Google remington 3200 problems and quite a few posts show up.

Author:  Skeet_Man [ Mon Sep 21, 2020 2:19 pm ]
Post subject:  Re: Remington 3200..What are the chances

Loose 3200 barrels are fairly uncommon. You will likely wait multiple years before you find the barrel you want.

Contact Laibs, they are pretty much the sole remaining source for Remington 3200 parts in the country, and one of the last handful of gunsmiths who can or will work on a 3200.

Author:  JoeCool [ Mon Sep 28, 2020 5:09 am ]
Post subject:  Re: Remington 3200..What are the chances

The most often broken part is the hammer plungers.
It is best to buy them as hammer plunger assemblies, because they can be difficult to put to put together, although they fall apart easily when the hammer plunger breaks.
Laib's made up a bunch of them at some point and is the only supplier I know of.
These parts are the ones identified as part 49 and 50 on
this link: https://www.gunpartscorp.com/gun-manufa ... s-rem/3200
..

Author:  strut64 [ Tue Sep 29, 2020 5:10 pm ]
Post subject:  Re: Remington 3200..What are the chances

i owned 2 3200's at one time, skeet and trap. The barrels would not interchange it seems to mono blocks were closely fitted to the receiver. One block was too wide and the other too narrow. Finding another barrel set won't guarantee that it will fit your receiver.

Author:  foggbird [ Tue Nov 03, 2020 3:20 pm ]
Post subject:  Re: Remington 3200..What are the chances

I have an extra set of 3200 barrels. Check your PM for more info. BTW 32" M&F Field

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/