 
|
Page 1 of 1
|
[ 6 posts ] |
|
| Author |
Message |
|
luberhill
|
Post subject: 1100 scope saddle mount ?  Posted: Sat Dec 19, 2020 11:14 am |
|
Joined: Mon Oct 02, 2017 7:13 pm
Posts: 58
|
I have an 1100 20 gage standard frame Also have an LT 20 I want to take the saddle type scope mount off the 1100 standard frame (12 gage frame) and put it on the Lt 1) will this work 2) any experience with this mount, it seems solid 3) I have a rifled barrel for my 1187, do I have to use special slugs ? Thank you
|
|
| Top |
|
 |
|
noweil
|
Post subject: Re: 1100 scope saddle mount ? Posted: Sat Dec 19, 2020 12:54 pm |
|
Joined: Sun Feb 21, 2016 5:47 pm
Posts: 410
Location: N. IL
|
|
A saddle mount for an older 1100 20 ga built on a 12 ga frame will not work on a LT 20 ga 1100. Measure the width of the receiver.
An 1187 with a rifled barrel is made to shoot sabots. You can shoot cheaper rifled slugs but they were not designed for a rifled barrel.
_________________
Hunters don't have to make excuses for shooting at birds that are too close.
|
|
| Top |
|
|
|
Virginian
|
Post subject: Re: 1100 scope saddle mount ? Posted: Sat Dec 19, 2020 1:10 pm |
|
| *Proud to be a* |
 |
 |
Joined: Mon May 19, 2008 8:20 pm
Posts: 14360
Location: Williamsburg, Virginia
|
luberhill wrote: I have an 1100 20 gage standard frame
Also have an LT 20
I want to take the saddle type scope mount off the 1100 standard frame (12 gage frame) and put it on the Lt
1) will this work - if you put spacers under the mount on both sides and then do not overtighten. Will look like crap, but will work.
2) any experience with this mount, it seems solid - put tape under it on both sides if you do not want to mess up your bluing.
3) I have a rifled barrel for my 1187, do I have to use special slugs ? It is designed to be used sabot slugs.
Thank you
_________________
What could have happened... did.
I do not trust Remington's dating service accuracy. If they were Match.com, you could end up with Nancy Pelosi.
|
|
| Top |
|
|
|
luberhill
|
Post subject: Re: 1100 scope saddle mount ? Posted: Sat Dec 19, 2020 1:14 pm |
|
Joined: Mon Oct 02, 2017 7:13 pm
Posts: 58
|
Virginian wrote: luberhill wrote: I have an 1100 20 gage standard frame
Also have an LT 20
I want to take the saddle type scope mount off the 1100 standard frame (12 gage frame) and put it on the Lt
1) will this work - if you put spacers under the mount on both sides and then do not overtighten. Will look like crap, but will work.
2) any experience with this mount, it seems solid - put tape under it on both sides if you do not want to mess up your bluing.
3) I have a rifled barrel for my 1187, do I have to use special slugs ? It is designed to be used sabot slugs.
Thank you So do they make one for the LT 20
|
|
| Top |
|
|
|
Virginian
|
Post subject: Re: 1100 scope saddle mount ? Posted: Sat Dec 19, 2020 3:31 pm |
|
| *Proud to be a* |
|
|
Joined: Mon May 19, 2008 8:20 pm
Posts: 14360
Location: Williamsburg, Virginia
|
luberhill wrote: So do they make one for the LT 20 Yes, Aimtech does for one.
_________________
What could have happened... did.
I do not trust Remington's dating service accuracy. If they were Match.com, you could end up with Nancy Pelosi.
|
|
| Top |
|
|
|
luberhill
|
Post subject: Re: 1100 scope saddle mount ? Posted: Sat Dec 19, 2020 7:43 pm |
|
Joined: Mon Oct 02, 2017 7:13 pm
Posts: 58
|
Virginian wrote: luberhill wrote: So do they make one for the LT 20 Yes, Aimtech does for one. Is that without shims ?
|
|
| Top |
|
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Login
Register
Chat [1]
Calendar
Photos
FAQ