ShotGunWorld Shotguns

It is currently Mon Jul 26, 2021 12:58 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Wed Jul 21, 2021 4:37 am 
Utility Grade

Joined: Sat Apr 03, 2021 5:00 am
Posts: 8
I bought the auto lifter from J Kenny and Co for my A400, COMPLETE and ABSOLUTE DISASTER, the whole process from buying, shipping, communication….etc is a JOKE.

To cut the story short, after 1001 problems and alterations the lifter doesn’t work properly, I’ve reached a point where the lifter lifts the shells up but the shells get stuck on the extractor, I believe it’s because the lifter is rubbing against the shell catcher, I could be wrong though. Any advice would be greatly appreciated before I start fighting for a refund.




Top
 Profile  
 
 Post subject: Re: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Wed Jul 21, 2021 8:32 am 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8705
Location: Colorado Springs, Co
Mgewaily wrote:
I bought the auto lifter from J Kenny and Co for my A400, COMPLETE and ABSOLUTE DISASTER, the whole process from buying, shipping, communication….etc is a JOKE.

To cut the story short, after 1001 problems and alterations the lifter doesn’t work properly, I’ve reached a point where the lifter lifts the shells up but the shells get stuck on the extractor, I believe it’s because the lifter is rubbing against the shell catcher, I could be wrong though. Any advice would be greatly appreciated before I start fighting for a refund.


What was wrong with the original part?


Top
 Profile  
 
 Post subject: Re: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Thu Jul 22, 2021 1:59 am 
Utility Grade

Joined: Sat Apr 03, 2021 5:00 am
Posts: 8
Dr Duk wrote:
Mgewaily wrote:
I bought the auto lifter from J Kenny and Co for my A400, COMPLETE and ABSOLUTE DISASTER, the whole process from buying, shipping, communication….etc is a JOKE.

To cut the story short, after 1001 problems and alterations the lifter doesn’t work properly, I’ve reached a point where the lifter lifts the shells up but the shells get stuck on the extractor, I believe it’s because the lifter is rubbing against the shell catcher, I could be wrong though. Any advice would be greatly appreciated before I start fighting for a refund.


What was wrong with the original part?


Top
 Profile  
 
 Post subject: Re: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Thu Jul 22, 2021 8:42 am 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8705
Location: Colorado Springs, Co
Mgewaily wrote:
I bought the auto lifter from J Kenny and Co for my A400, COMPLETE and ABSOLUTE DISASTER, the whole process from buying, shipping, communication….etc is a JOKE.

To cut the story short, after 1001 problems and alterations the lifter doesn’t work properly, I’ve reached a point where the lifter lifts the shells up but the shells get stuck on the extractor, I believe it’s because the lifter is rubbing against the shell catcher, I could be wrong though. Any advice would be greatly appreciated before I start fighting for a refund.


So the problem is with the NEW shell lifter?? Or the original??


Top
 Profile  
 
 Post subject: Re: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Thu Jul 22, 2021 11:36 am 
Utility Grade

Joined: Sat Apr 03, 2021 5:00 am
Posts: 8
The problem is with the J Kenny and Co lifter, the original works flawlessly


Top
 Profile  
 
 Post subject: Re: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Thu Jul 22, 2021 11:43 am 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8705
Location: Colorado Springs, Co
Mgewaily wrote:
The problem is with the J Kenny and Co lifter, the original works flawlessly


So why did you change?


Top
 Profile  
 
 Post subject: Re: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Thu Jul 22, 2021 12:59 pm 
Utility Grade

Joined: Sat Apr 03, 2021 5:00 am
Posts: 8
The J Kenny and Co is an auto lifter. I wanted it cuz I needed it, that’s why I changed, but now I’m changing back to the original but was wondering if anyone know anything about it that can help me fix it


Top
 Profile  
 
 Post subject: Re: J Kenny and Co lifter PROBLEMS with A400 Xtreme
PostPosted: Thu Jul 22, 2021 1:38 pm 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8705
Location: Colorado Springs, Co
Mgewaily wrote:
The J Kenny and Co is an auto lifter. I wanted it cuz I needed it, that’s why I changed, but now I’m changing back to the original but was wondering if anyone know anything about it that can help me fix it


If it ain’t broke




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: .45colt, AJ-M12, Bing [Bot], Bladeswitcher, bullseye-69, casonet, DEG, dickgtax, DogDay, DUKFVR, F*W*F, gold40, Google [Bot], Google Adsense [Bot], Google Feedfetcher, harvard, Jim Tyner, Joe Hunter, JoeEddie, kyskeet, Lacyb, longshanx, Major146, mark-60, MarkHodson, McFarmer, muskyjack, newstart2k, noweil, Old No7, oyeme, pitandremington, pjmx, RAT 3323, rhodesengr, Rockett0, Rubberhead, Scott in TX, SD angler, sera, Skeet_Man, soupsandwich, SuperXOne, T-Pee, TazManiac, templetk333, Troutwards, Troyite, Vette Jockey2, Wchadw, Winch66, woodsltc, Woodymac, ysr_racer


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice