Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

Beretta Info
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=57&t=31150
Page 2 of 2

Author:  ohio phil [ Thu Apr 09, 2009 5:10 am ]
Post subject:  Re: Beretta Info

Johnjohn
I have a new to me DT10 was told 1 of 30 came out at the grand Vandalia do you think this is a 1999 ?
model AFO122B, thanks I sure like the gun new to trap & skeet it is a combo 30" and 34"

Thank you Phil

Author:  duckmart [ Wed Jun 24, 2009 11:11 pm ]
Post subject:  Re: Beretta Info

So I take it the xtrema2 can NOT use the optima choke? Only the optima plus! Thanks

Author:  berettaclayshooter [ Sun Dec 27, 2009 1:17 pm ]
Post subject:  Re: Beretta Info

The 12 Ga. 391 urika came with mobil chokes, it was when they came out with the urika2 that they switched to the optima bore. Guns dating prior to 2003 came with the mobil choke system spec. @ .722-.723 nominal, optima are spec @ .732-.733 or .010 overbore from the mobil.

-Berettaclayshooter

Author:  davandron [ Mon Aug 30, 2010 10:26 pm ]
Post subject:  Beretta Website Serial Number Decoder

The Beretta support website has a limited serial number decoder for all their firearm products. It's divided into four separate searches based on manufacture year.

Beretta Firearm Technical Data Search Form

The quality of information it returns varies based on unknown factors, but it has typically returned the specific model number, options (such as gauge, barrel length, chamber), and year of manufacture/registration.

Edited to update the link

Author:  Prohunter2 [ Sun Nov 14, 2010 9:18 am ]
Post subject:  Re: Beretta Info

Had a question that might have already been answered but over looked it..

I just bought a extrema 2 and do a lot of duck hunting.. What's the best choke to use??

Also is it ok to use the full choke now out of this gun??

Thanks for help!!

Author:  Redcobra [ Tue Sep 13, 2011 1:57 pm ]
Post subject:  Re: Beretta Info

Just bought a Silver Pigeon 1 and a AL391 Urika 2 Parallel Trap.
The SP1 came with Optima Flush tibe chokes and the U2 came with Optima extended chokes.
The SP1 also came with oiled walnut furniture and not gloss and I am told that is newas well as using the Optima Chokes.

Author:  bob572 [ Wed Oct 05, 2011 11:44 am ]
Post subject:  Re: Beretta Info

what about the a400 that use optima choke hp ... and are the dofference betwenn the optima and the optima plus .... on beretta website they never wrote optima choke plus only optima choke and optima choke hp....???

Author:  sandiegocaguy [ Wed Feb 01, 2012 9:14 pm ]
Post subject:  Re: Beretta Info

Are the beretta chokes any good and do I need to buy any other like the comp N chokes or briley ones?
Thanks

Author:  Milkmaster [ Tue Feb 21, 2012 9:14 pm ]
Post subject:  Re: Beretta Info

This thread is old, but there still seems to be some confusion about the White Onyx Sporting. I sure enjoy mine and the value I found in it. It has the back bored barrels with Optima chokes.

From the Beretta website...

Quote:
Designed to fulfill everything shooters look for in a competition shotgun, the Beretta 686 White Onyx Sporting over-and-under proves that you can still get brilliant results on a reasonable budget.

It features a receiver machined with the Beretta distinctive Dura-Jewel pattern and a nickel-alloy finish contrasting with the satin side panels and the gold-plated trigger.

The Optima-BoreĀ® barrels reduce felt recoil and the OptimachokeĀ® tubes guarantee a perfect shot pattern and a regular distribution of pellets.

Author:  klobbr [ Mon Dec 23, 2013 11:10 am ]
Post subject:  Re: Beretta Info

Update to this thread...I know its a little dusty.

2013 build date Beretta SV10 Prevail I Sporting. I have one with 30" Optima Bore HP barrels that was factory fit with Optima Bore HP steel chokes. There are no other Beretta chokes that will work with the HP designated barrels.

Best,
Bob

Author:  aBrowningfan [ Mon Jun 08, 2015 2:10 am ]
Post subject:  2 Qs regarding SV10 Perennia III in 20 gauge

Can anyone help me understand the Beretta SV10 Perennia website (URL: http://www.sv10perennia.com/index.aspx?m=53&did=3067 )? Two questions:

1. Drop is listed as 1.5"/2.36" or 1.38"/2.17". Is this for both 12 and 20 gauge, and the difference is based on shim position? Or?

2. What is the receiver height (total height, including rib)?

Thanks in advance.

Page 2 of 2 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/