ShotGunWorld Shotguns

It is currently Thu May 13, 2021 1:00 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Installing B fast weights in 694
PostPosted: Mon May 03, 2021 7:51 pm 
Tournament Grade

Joined: Sat Feb 12, 2005 6:01 pm
Posts: 164
Location: long island n.y.
Just got a 694 and want to add some weight in stock the gun has a set of weights

Before I take off the recoil pad and poke around I'd like to have some idea how these washer type weights get installed

Thanks




Top
 Profile  
 
 Post subject: Re: Installing B fast weights in 694
PostPosted: Mon May 03, 2021 8:51 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Fri Feb 15, 2008 5:22 pm
Posts: 11188
Location: Athens,TX.
Image

Easy peasy :)

_________________
Jerry

TSRA LIFE MEMBER
NSCA #610xxx

Rose City Clays - Tyler TX
5H Shooting Sports Frankston TX ( Formally the Chicken Ranch)


Top
 Profile  
 
 Post subject: Re: Installing B fast weights in 694
PostPosted: Mon May 03, 2021 8:57 pm 
Tournament Grade

Joined: Sat Feb 12, 2005 6:01 pm
Posts: 164
Location: long island n.y.
Thanks , pretty straight forward ... is there a threaded nut in stock to receive the machine screw


Top
 Profile  
 
 Post subject: Re: Installing B fast weights in 694
PostPosted: Mon May 03, 2021 9:07 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Fri Feb 15, 2008 5:22 pm
Posts: 11188
Location: Athens,TX.
No just screws into the wood of the stock,and should be a longer screw if needed depending on what you add to it. I played around a bit with my stock and Bbl weights and after just a couple of outings put it back like it came from the factory.

_________________
Jerry

TSRA LIFE MEMBER
NSCA #610xxx

Rose City Clays - Tyler TX
5H Shooting Sports Frankston TX ( Formally the Chicken Ranch)


Top
 Profile  
 
 Post subject: Re: Installing B fast weights in 694
PostPosted: Mon May 03, 2021 9:13 pm 
Tournament Grade

Joined: Sat Feb 12, 2005 6:01 pm
Posts: 164
Location: long island n.y.
I've been trying to loosen the action . Open - close etc etc. damn thing is tight !!

I have a 686 and had put a Graco mercury recoil in stock , then added 4oz wt on barrel end
Like the balance and the weight helps with recoil

694 feels heavier to begin with but that could be the 32"s 30's on the 686


Top
 Profile  
 
 Post subject: Re: Installing B fast weights in 694
PostPosted: Tue May 04, 2021 4:46 am 
Limited Edition
User avatar

Joined: Tue Nov 27, 2007 7:03 pm
Posts: 394
mfm22 wrote:
694 feels heavier to begin with but that could be the 32"s 30's on the 686

My 694 is slightly heavier than my DT11, likely due to the 694 having an adjustable comb and the DT being a one piece stock.

Congrats on yours. It is a great shotgun.


Top
 Profile  
 
 Post subject: Re: Installing B fast weights in 694
PostPosted: Tue May 04, 2021 7:33 am 
Utility Grade

Joined: Mon Jul 10, 2006 7:57 am
Posts: 12
The weights do not just screw into the wood. There is a plate attached to the stock with wood screws. The plate has a threaded hole that secures the weights. There are 4 weights in the set.


Top
 Profile  
 
 Post subject: Re: Installing B fast weights in 694
PostPosted: Tue May 04, 2021 8:22 pm 
Tournament Grade

Joined: Sat Feb 12, 2005 6:01 pm
Posts: 164
Location: long island n.y.
Just finished installing 3 of the weights just shy of 4oz. Gun is now balanced at the hinge pin .
Adjusted comb a bit and loosened up action some ...ready to shoot !




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 98052, Bing [Bot], cheecho1960, cole1, fiver, Google [Bot], Google Adsense [Bot], Google Feedfetcher, John Henry, Kevin250, Life of Riley, Majestic-12 [Bot], Pine Creek/Dave, pjmx, polla1983, scrugneysgundogs, slowshooter, stubshaft, Terrapin, thelaserman, tschlemm


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice