ShotGunWorld Shotguns

It is currently Thu May 13, 2021 1:04 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Beretta AL 391 Urika 2 bolt release assembly.
PostPosted: Tue May 04, 2021 10:09 am 
Tournament Grade

Joined: Sat Jan 24, 2015 2:03 pm
Posts: 294
Hallo to everyone,

i have the Al 391 Urika 2 for 8 years now and i like it a lot.
As i was cleaning the receiver from the inside i pushed the bolt release assembly a little and i felt that it has a " play, up-down "- the inner long part -not too much, but it sure has.
I do not know if thats normal or it is some kind of wear. Please advise.
The gun operates normal.

Thank you for your time to respond and your help.




Top
 Profile  
 
 Post subject: Re: Beretta AL 391 Urika 2 bolt release assembly.
PostPosted: Tue May 04, 2021 9:45 pm 
Presentation Grade

Joined: Fri Dec 16, 2005 9:53 am
Posts: 658
It is difficult to understand from your description....

To fully access the inside of the receiver, you must remove the rigger group and the bolt carrier assembly.

Have you removed this group and assembly totally out of the receiver?


Top
 Profile  
 
 Post subject: Re: Beretta AL 391 Urika 2 bolt release assembly.
PostPosted: Wed May 05, 2021 11:31 am 
Tournament Grade

Joined: Sat Jan 24, 2015 2:03 pm
Posts: 294
Sorry that my description was not clear enough.

My receiver is completely empty.....i have removed the trigger group and the bolt assembly.
The assembly that i am talking is the bolt release assembly that is in the receiver and has the bolt release button attached on the outside. The inner long part with the spring is the one that has the small up-down movement. Please advice on this, normal or not ?

There's one for sale on ebay https://www.ebay.com/itm/353262905402?m ... olid=10001

Hope this helps, thank you again.


Top
 Profile  
 
 Post subject: Re: Beretta AL 391 Urika 2 bolt release assembly.
PostPosted: Wed May 05, 2021 11:51 am 
Crown Grade
User avatar

Joined: Tue Jan 08, 2008 6:20 pm
Posts: 23527
If your gun functions fine with no hiccups, leave well enough alone.

_________________
The bitterness of poor quality is remembered long after the sweetness of low price has faded from memory, Aldo Gucci

Never argue with an idiot. They will only bring you down to their level and beat you with experience, George Carlin


Top
 Profile  
 
 Post subject: Re: Beretta AL 391 Urika 2 bolt release assembly.
PostPosted: Wed May 05, 2021 9:15 pm 
Presentation Grade

Joined: Fri Dec 16, 2005 9:53 am
Posts: 658
Gr shooter wrote:
Sorry that my description was not clear enough.

My receiver is completely empty.....i have removed the trigger group and the bolt assembly.
The assembly that i am talking is the bolt release assembly that is in the receiver and has the bolt release button attached on the outside. The inner long part with the spring is the one that has the small up-down movement. Please advice on this, normal or not ?

There's one for sale on ebay https://www.ebay.com/itm/353262905402?m ... olid=10001

Hope this helps, thank you again.


I believe this is the normal condition of bolt release assembly...there is no wear.

The proof is the gun functions normally, so it’s all good.
Enjoy!


Top
 Profile  
 
 Post subject: Re: Beretta AL 391 Urika 2 bolt release assembly.
PostPosted: Thu May 06, 2021 1:25 pm 
Tournament Grade

Joined: Sat Jan 24, 2015 2:03 pm
Posts: 294
Thank you for all your help.




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 98052, Bing [Bot], cheecho1960, cole1, fiver, Google [Bot], Google Adsense [Bot], Google Feedfetcher, John Henry, Kevin250, Life of Riley, Majestic-12 [Bot], Pine Creek/Dave, pjmx, polla1983, scrugneysgundogs, slowshooter, stubshaft, Terrapin, thelaserman, tschlemm


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice