Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

Mossberg 28 Gauge
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=58&t=517810
Page 1 of 1

Author:  shrike [ Tue Aug 25, 2020 8:44 pm ]
Post subject:  Mossberg 28 Gauge

Surprised to see that Mossberg does the 12, 20 and .410 in their model 500, but not the 28 Gauge. A limited run of 28 and why not.........do some 16. Both can be done on 20 gauge frames.

Author:  Bladeswitcher [ Tue Aug 25, 2020 8:54 pm ]
Post subject:  Re: Mossberg 28 Gauge

shrike wrote:
Surprised to see that Mossberg does the 12, 20 and .410 in their model 500, but not the 28 Gauge. A limited run of 28 and why not.........do some 16. Both can be done on 20 gauge frames.



Mossberg made a 500B (16 gauge) in the past. They've never made a 500D (28 gauge). And bite your tongue about combining frames. IIRC, Mossbergs always had gauge specific frame.

I own a 28 gauge Wingmaster, but I'd sure like to see Mossberg make a 28. I think that would be cool. I wouldn't hold my breath, though.

Author:  Vette Jockey2 [ Tue Aug 25, 2020 9:45 pm ]
Post subject:  Re: Mossberg 28 Gauge

The slickest 28 gauge pump, in my opinion, is the Browning model 12.

Author:  bearman49709 [ Sat Aug 29, 2020 7:26 am ]
Post subject:  Re: Mossberg 28 Gauge

Bladeswitcher wrote:
shrike wrote:
Surprised to see that Mossberg does the 12, 20 and .410 in their model 500, but not the 28 Gauge. A limited run of 28 and why not.........do some 16. Both can be done on 20 gauge frames.



Mossberg made a 500B (16 gauge) in the past. They've never made a 500D (28 gauge). And bite your tongue about combining frames. IIRC, Mossbergs always had gauge specific frame.


The 500B was built on the 500A frame.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/