| Shotgunworld.com https://www.shotgunworld.com:443/bbs/ |
|
| Can a 12 ga model 21 stock be fitted to 20 ga https://www.shotgunworld.com:443/bbs/viewtopic.php?f=60&t=502446 |
Page 1 of 1 |
| Author: | boboy [ Tue Nov 26, 2019 9:31 am ] |
| Post subject: | Can a 12 ga model 21 stock be fitted to 20 ga |
Can a 12 gauge model 21 stock be fitted to a 20 gauge model 21 thanks Bobby |
|
| Author: | P.Muerrle [ Tue Nov 26, 2019 6:17 pm ] |
| Post subject: | Re: Can a 12 ga model 21 stock be fitted to 20 ga |
No it can't. |
|
| Author: | boboy [ Thu Nov 28, 2019 4:04 pm ] |
| Post subject: | Re: Can a 12 ga model 21 stock be fitted to 20 ga |
I was told by a collector that inletting is same but head of stock would have to be worked down to smaller size. Thanks BB |
|
| Author: | M12Gunboy [ Fri Nov 29, 2019 9:44 am ] |
| Post subject: | Re: Can a 12 ga model 21 stock be fitted to 20 ga |
Guess it depends upon your definition of "fitted". A 4"x4" post could be used too, but I wouldn't call that "fitted". Fitted normally implies very minimal wood work or wood removal. |
|
| Author: | 2lo8s [ Fri Nov 29, 2019 10:18 am ] |
| Post subject: | Re: Can a 12 ga model 21 stock be fitted to 20 ga |
Can a 20 gauge stock be used on a 16 gauge? |
|
| Author: | Dr Duk [ Fri Nov 29, 2019 2:33 pm ] |
| Post subject: | Re: Can a 12 ga model 21 stock be fitted to 20 ga |
Is a double trigger stock the same as a single trigger stock? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|