ShotGunWorld Shotguns

It is currently Sun Nov 29, 2020 11:38 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: SX-1 Trigger Information
PostPosted: Sat Nov 30, 2019 12:54 pm 
Utility Grade

Joined: Tue Nov 25, 2003 7:13 pm
Posts: 17
Location: Central Illinois
Looking for any information regarding this recently acquired Winchester Super-X Model 1 Stage 1 trigger group. Precisely, the type of coating that was used, what the "CO" stamp refers to and why the allen head adjustment screw was replaced with a slotted head screw. Also, the safety has been disabled. Trigger functions perfectly, just curious about the modifications. Thanks, JD




You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: SX-1 Trigger Information
PostPosted: Sat Nov 30, 2019 3:03 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon Jul 20, 2009 1:54 pm
Posts: 11445
Location: Kansas
It appears to have the Wrights modification kit installed (spring within a spring). Couldn’t say about the slotted screw or the “CC”

_________________
"We pulled the trigger, the safety went forward, both barrels fired almost together, the gun opened, ejectors kicked the fired cases over our shoulder ...the most completely automatic gun we ever fired" Elmer Keith- Shotguns by Keith


Top
 Profile  
 
 Post subject: Re: SX-1 Trigger Information
PostPosted: Sat Nov 30, 2019 3:51 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Mon Jul 20, 2009 1:54 pm
Posts: 11445
Location: Kansas
Whoops. I could be wrong about that kit. Now I believe the Wrights kit is a single spring. Yours may be the original

_________________
"We pulled the trigger, the safety went forward, both barrels fired almost together, the gun opened, ejectors kicked the fired cases over our shoulder ...the most completely automatic gun we ever fired" Elmer Keith- Shotguns by Keith


Top
 Profile  
 
 Post subject: Re: SX-1 Trigger Information
PostPosted: Sun Dec 01, 2019 12:49 pm 
Presentation Grade
User avatar

Joined: Wed Feb 09, 2011 8:12 pm
Posts: 586
Location: Oregon
Yep, the dual spring is factory original on stage 1 triggers. Later on the factory changed to a single spring with a higher rate. The Wright's spring is a higher rate than the factory spring and it raises
the pull rate by almost a pound and is not needed for a correct hammer strike. There is a better modification.
Perhaps some one lost the factory allen screw and made a replacement from a standard slotted screw.
The plating appears to be electroless nickel but would have to be seen in person to confirm.
Most likely the initials are those of the smith that worked on the trigger.

CT


Top
 Profile  
 
 Post subject: Re: SX-1 Trigger Information
PostPosted: Wed Dec 11, 2019 4:13 pm 
Utility Grade

Joined: Tue Nov 25, 2003 7:13 pm
Posts: 17
Location: Central Illinois
A bit more information, I looked at 3 other Stage 1 triggers and they were all marked with "CC" or "CO". Does not appear on the Stage 3.




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 1casual, ageduk82, bbush, bcraig, Bing [Bot], Bladeswitcher, bullseye-69, Bushmaster1313, cbradford, Galaxy Flyer, garrisonjoe, Google [Bot], Google Adsense [Bot], gr8day, Hal4son, henrims, Jaspo01, JayMc, jimbloomfield, JMBSGs, Jolly Bill, kbod, Mark Pfeifer, mark-60, mic454, Muddydogs, myshootinstinks*, oyeme, Pine Creek/Dave, Pullandmark, rabbitwhacker, Rack-N-Roy, riceducker, richg99, Rooster booster, Rudolph31, RudyN, saskbooknut, Schnurb, Shooting Dave, sneem2, StanofKansas, Steeler [Crawler], tgb18, tresamigovizslas, tschlemm, tydaws, VictorGK, WAGinVA, Westender, wickowick


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice