Shotgunworld.com
https://www.shotgunworld.com:443/bbs/

A391 Ureka jammed bolt while cleaning
https://www.shotgunworld.com:443/bbs/viewtopic.php?f=61&t=525934
Page 1 of 1

Author:  Turbo t [ Mon Jan 11, 2021 12:44 am ]
Post subject:  A391 Ureka jammed bolt while cleaning

Hi,...I was cleaning my gun and must have pulled the trigger by accident and now the action is jammed all the way forward. Any suggestions on how to release it would be appreciated.

Author:  Dr Duk [ Mon Jan 11, 2021 11:04 am ]
Post subject:  Re: A391 Ureka jammed bolt while cleaning

Turbo t wrote:
Hi,...I was cleaning my gun and must have pulled the trigger by accident and now the action is jammed all the way forward. Any suggestions on how to release it would be appreciated.



This is a Benelli forum, not Beretta.
Try posting the question there.
Take the trigger out and see what the problem is!
Don’t know why pulling the trigger would lock the bolt forward.

Author:  Ulysses [ Mon Jan 11, 2021 11:32 am ]
Post subject:  Re: A391 Ureka jammed bolt while cleaning

Turbo t wrote:
Hi,...I was cleaning my gun and must have pulled the trigger by accident and now the action is jammed all the way forward. Any suggestions on how to release it would be appreciated.


Try pushing in on the carrier release button just in front of the trigger guard on the bottom of the receiver.

Or, if you've removed the barrel, you may not have it installed completely flush with the receiver.

Or, if you've had the barrel off, the connecting rod may have slipped out of the cup on the forward end of the action (recoil) spring that goes back into the buttstock.

Author:  Dr Duk [ Mon Jan 11, 2021 2:23 pm ]
Post subject:  Re: A391 Ureka jammed bolt while cleaning

Ulysses wrote:
Turbo t wrote:
Hi,...I was cleaning my gun and must have pulled the trigger by accident and now the action is jammed all the way forward. Any suggestions on how to release it would be appreciated.


Try pushing in on the carrier release button just in front of the trigger guard on the bottom of the receiver.

Or, if you've removed the barrel, you may not have it installed completely flush with the receiver.

Or, if you've had the barrel off, the connecting rod may have slipped out of the cup on the forward end of the action (recoil) spring that goes back into the buttstock.


3 excellent suggestions!

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/