ShotGunWorld Shotguns

It is currently Thu May 06, 2021 7:53 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Affinity 3 compatibility with Benelli M2 parts
PostPosted: Tue Dec 15, 2020 9:30 am 
Utility Grade

Joined: Tue Dec 15, 2020 9:27 am
Posts: 3
Hello can anyone confirm whether the Taran Tactical extended carrier, hammer spring, and trigger spring that is advertised for the Benelli M2 will work in an Affinity 3 without modification? I have tried reaching out to Taran Tactical, but the do not answer phones or emails.
Thanks in advance




Top
 Profile  
 
 Post subject: Re: Affinity 3 compatibility with Benelli M2 parts
PostPosted: Wed Dec 16, 2020 11:24 pm 
Presentation Grade
User avatar

Joined: Sat Aug 01, 2020 11:50 pm
Posts: 595
Location: The wilds of rural central California
Yes they do. Most M2 parts interchange with the Affinity 3.
I've installed the TTI M2 lifter in two Affinitys and they work great. Ten minute job.

tp

_________________
RM, NRA/USCCA RSO, NSSF, and a bunch of other acronyms.
12/30" Browning Citori CX White
12/28" 1978 Browning BSS
12/26" Franchi Affinity 3
12/26" ATI Cavalry (finally got firing pin after seven months)


Top
 Profile  
 
 Post subject: Re: Affinity 3 compatibility with Benelli M2 parts
PostPosted: Thu Dec 17, 2020 7:37 am 
Utility Grade

Joined: Tue Dec 15, 2020 9:27 am
Posts: 3
T-Pee wrote:
Yes they do. Most M2 parts interchange with the Affinity 3.
I've installed the TTI M2 lifter in two Affinitys and they work great. Ten minute job.

tp



awesome thank you. have you used the TTI hammer and trigger springs in an Affinity 3?


Top
 Profile  
 
 Post subject: Re: Affinity 3 compatibility with Benelli M2 parts
PostPosted: Thu Dec 17, 2020 11:31 am 
Presentation Grade
User avatar

Joined: Sat Aug 01, 2020 11:50 pm
Posts: 595
Location: The wilds of rural central California
No. Didn't feel like the gun needed them for any reason. The lifter? Absolutely.

tp

_________________
RM, NRA/USCCA RSO, NSSF, and a bunch of other acronyms.
12/30" Browning Citori CX White
12/28" 1978 Browning BSS
12/26" Franchi Affinity 3
12/26" ATI Cavalry (finally got firing pin after seven months)


Top
 Profile  
 
 Post subject: Re: Affinity 3 compatibility with Benelli M2 parts
PostPosted: Thu Dec 17, 2020 2:20 pm 
Utility Grade

Joined: Tue Dec 15, 2020 9:27 am
Posts: 3
T-Pee wrote:
No. Didn't feel like the gun needed them for any reason. The lifter? Absolutely.

tp



thank you sir




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 525 sporting, 870Slugger, AJ-M12, albanygun, battuedave, Bill M., Bing [Bot], birdhunter39, brdslayr, bullseye-69, Cfelix10, DanG, Diddle, double20, dpe2002, dubob, DUKFVR, EricB, federal, Flyingtargets!, garym52, Gone shootin, goodemachine, Google [Bot], Google Adsense [Bot], Hal4son, hardcast, Hollywood22, hopper810, icyclefar, Jason Johnson, jfon, LG, lossking, Major146, maltzahn, manfrommaryville, Milkmaster, MNNavy, mpolans, newstart2k, oldthompson, oneounceload, papillonkirby, paulaner, pete blakeley, pitandremington, Rack-N-Roy, Ravenanme, rbeckwith, Road Man, Rockett0, Safetyfast, Saltydog055, saludamc, shacked, Shadowdog500, shootandfish2, Snotrub, soupsandwich, strut64, Supermoose, SWPAMike, tbergstedt, Tidefanatic, valencman, Vette Jockey2, Warden, Wchadw, Wheelspin


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice