 
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
michstorm1
|
Post subject: Affinity 3 compatibility with Benelli M2 parts  Posted: Tue Dec 15, 2020 9:30 am |
|
Joined: Tue Dec 15, 2020 9:27 am
Posts: 3
|
Hello can anyone confirm whether the Taran Tactical extended carrier, hammer spring, and trigger spring that is advertised for the Benelli M2 will work in an Affinity 3 without modification? I have tried reaching out to Taran Tactical, but the do not answer phones or emails. Thanks in advance
|
|
| Top |
|
 |
|
T-Pee
|
Post subject: Re: Affinity 3 compatibility with Benelli M2 parts Posted: Wed Dec 16, 2020 11:24 pm |
|
| Presentation Grade |
 |
Joined: Sat Aug 01, 2020 11:50 pm
Posts: 592
Location: The wilds of rural central California
|
|
Yes they do. Most M2 parts interchange with the Affinity 3.
I've installed the TTI M2 lifter in two Affinitys and they work great. Ten minute job.
tp
_________________
RM, NRA/USCCA RSO, NSSF, and a bunch of other acronyms.
12/30" Browning Citori CX White
12/28" 1978 Browning BSS
12/26" Franchi Affinity 3
12/26" ATI Cavalry (waiting >3 months now for a frikkin' firing pin)
|
|
| Top |
|
|
|
michstorm1
|
Post subject: Re: Affinity 3 compatibility with Benelli M2 parts Posted: Thu Dec 17, 2020 7:37 am |
|
Joined: Tue Dec 15, 2020 9:27 am
Posts: 3
|
T-Pee wrote: Yes they do. Most M2 parts interchange with the Affinity 3.
I've installed the TTI M2 lifter in two Affinitys and they work great. Ten minute job.
tp awesome thank you. have you used the TTI hammer and trigger springs in an Affinity 3?
|
|
| Top |
|
|
|
T-Pee
|
Post subject: Re: Affinity 3 compatibility with Benelli M2 parts Posted: Thu Dec 17, 2020 11:31 am |
|
| Presentation Grade |
|
Joined: Sat Aug 01, 2020 11:50 pm
Posts: 592
Location: The wilds of rural central California
|
|
No. Didn't feel like the gun needed them for any reason. The lifter? Absolutely.
tp
_________________
RM, NRA/USCCA RSO, NSSF, and a bunch of other acronyms.
12/30" Browning Citori CX White
12/28" 1978 Browning BSS
12/26" Franchi Affinity 3
12/26" ATI Cavalry (waiting >3 months now for a frikkin' firing pin)
|
|
| Top |
|
|
|
michstorm1
|
Post subject: Re: Affinity 3 compatibility with Benelli M2 parts Posted: Thu Dec 17, 2020 2:20 pm |
|
Joined: Tue Dec 15, 2020 9:27 am
Posts: 3
|
T-Pee wrote: No. Didn't feel like the gun needed them for any reason. The lifter? Absolutely.
tp thank you sir
|
|
| Top |
|
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Login
Register
Chat [1]
Calendar
Photos
FAQ