ShotGunWorld Shotguns

It is currently Thu Oct 01, 2020 3:13 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: barrel diameter of the M2000
PostPosted: Sat Dec 27, 2008 9:25 am 
Field Grade

Joined: Sat Dec 06, 2008 6:10 pm
Posts: 25
Location: Southern Ill
Does anyone know the barrel diameter of the M2000. Im looking at patterning my new gun and have to get some chokes first.




Top
 Profile  
 
 Post subject: re: barrel diameter of the M2000
PostPosted: Sat Dec 27, 2008 9:58 am 
*Proud to be a*
*Proud to be a*

Joined: Thu Mar 15, 2007 7:47 pm
Posts: 11248
Location: Coastal NC
I find the factory chokes to be satisfactory. The extended turkey choke furnished with the gun is very tight. In all, there were 5 chokes in the box with the gun.

Call or write:

Stoeger Industries, 17603 Indian Head Highway, Suite 200, Accokeek, MD 20607-2501. (301) 283-6981 or (800) 264-4962

or a set of factory chokes. Or send George Trulock an email for his chokes.

Benelli chokes are very expensive and will fit. I think Stoeger will send you a set of Stoeger chokes for a minimum fee, maybe even without charge. Call them during business hours.

_________________
Evan

The two most common elements in the
universe are hydrogen and stupidity.”


Top
 Profile  
 
 Post subject: re: barrel diameter of the M2000
PostPosted: Sat Dec 27, 2008 10:07 am 
Field Grade

Joined: Sat Dec 06, 2008 6:10 pm
Posts: 25
Location: Southern Ill
I will try calling them. I was just trying to get an idea of how much constriction the choke are putting on the barrel.


Top
 Profile  
 
 Post subject: re: barrel diameter of the M2000
PostPosted: Sat Dec 27, 2008 10:15 am 
Utility Grade

Joined: Tue Dec 23, 2008 9:25 pm
Posts: 12
You may find this article may be helpful in regards to chokes.


http://www.wildfowlmag.com/tips_strateg ... un_062304/


Top
 Profile  
 
 Post subject: re: barrel diameter of the M2000
PostPosted: Tue Dec 30, 2008 6:12 am 
Field Grade

Joined: Sat Dec 06, 2008 6:10 pm
Posts: 25
Location: Southern Ill
yes that helps thank you. What Im looking for is a number of the inside diameter on the barrel.


Top
 Profile  
 
 Post subject: re: barrel diameter of the M2000
PostPosted: Tue Dec 30, 2008 6:12 pm 
Field Grade

Joined: Sat Dec 06, 2008 6:10 pm
Posts: 25
Location: Southern Ill
Just so everyone else knows the Stoeger m2000 barrel is .724
That comes from benelli customer service.




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: Bing [Bot], cookoff013, faridsf, Google [Bot], Google Adsense [Bot], HusqvarnaSweden, Kannoncocker, komatsu, Majestic-12 [Bot], skeetsit, StephenK, strut64


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice