 
|
Page 1 of 1
|
[ 6 posts ] |
|
| Author |
Message |
|
boboy
|
Post subject: Can a 12 ga model 21 stock be fitted to 20 ga  Posted: Tue Nov 26, 2019 9:31 am |
|
Joined: Sat Mar 13, 2004 6:49 pm
Posts: 220
Location: Georgia
|
Can a 12 gauge model 21 stock be fitted to a 20 gauge model 21 thanks Bobby
|
|
| Top |
|
 |
|
P.Muerrle
|
Post subject: Re: Can a 12 ga model 21 stock be fitted to 20 ga Posted: Tue Nov 26, 2019 6:17 pm |
|
Joined: Sun Mar 07, 2010 2:02 pm
Posts: 1388
Location: Ct.
|
|
| Top |
|
|
|
boboy
|
Post subject: Re: Can a 12 ga model 21 stock be fitted to 20 ga Posted: Thu Nov 28, 2019 4:04 pm |
|
Joined: Sat Mar 13, 2004 6:49 pm
Posts: 220
Location: Georgia
|
|
I was told by a collector that inletting is same but head of stock would have to be worked down to smaller size. Thanks BB
|
|
| Top |
|
|
|
M12Gunboy
|
Post subject: Re: Can a 12 ga model 21 stock be fitted to 20 ga Posted: Fri Nov 29, 2019 9:44 am |
|
Joined: Tue Jun 15, 2010 5:07 pm
Posts: 1976
Location: Augusta, GA
|
|
Guess it depends upon your definition of "fitted". A 4"x4" post could be used too, but I wouldn't call that "fitted". Fitted normally implies very minimal wood work or wood removal.
|
|
| Top |
|
|
|
2lo8s
|
Post subject: Re: Can a 12 ga model 21 stock be fitted to 20 ga Posted: Fri Nov 29, 2019 10:18 am |
|
Joined: Tue Aug 28, 2007 10:29 pm
Posts: 1073
Location: Left Coast
|
|
Can a 20 gauge stock be used on a 16 gauge?
_________________
"A gun no matter how fine, serves its destiny only if it is shot."
|
|
| Top |
|
|
|
Dr Duk
|
Post subject: Re: Can a 12 ga model 21 stock be fitted to 20 ga Posted: Fri Nov 29, 2019 2:33 pm |
|
| Crown Grade |
 |
Joined: Fri Apr 22, 2011 10:46 am
Posts: 8420
Location: Colorado Springs, Co
|
Is a double trigger stock the same as a single trigger stock?
|
|
| Top |
|
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Login
Register
Chat [1]
Calendar
Photos
FAQ