ShotGunWorld Shotguns

It is currently Fri Dec 04, 2020 4:01 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 68 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 Post subject: Re: Looking for a Super X One
PostPosted: Tue Aug 25, 2020 10:51 am 
Tournament Grade

Joined: Wed Oct 01, 2014 8:49 pm
Posts: 230
searun wrote:
Jordon,

The competition guns came from the factory with chrome plated mag tubes. They were also installed with blue Locktite. If yours is not Locktited it might have been replaced or reversed at one time. I recommend that you Locktite it.
If it is a stainless tube they have a satin sheen rather than the bright chrome. A magnet will confirm what you have.
The Winchester sights are 3/56 threads. The mid bead should be available but usually need a pin vise to install them.
On my SX-1 guns I wipe a very thin film of CLP on all the gas parts before shooting and that makes clean up much easier.

CT


Thanks for the info.

I'll loctite mine in with the blue lock tite when I get home.

I'll look around for a mid bead. I know there are a lot of options out there.




Top
 Profile  
 
 Post subject: Re: Looking for a Super X One
PostPosted: Tue Aug 25, 2020 6:43 pm 
Presentation Grade
User avatar

Joined: Wed Feb 09, 2011 8:12 pm
Posts: 587
Location: Oregon
Jordan,

Nu-LIne Guns has them. Part # USR-94E.
They are nice and small.

CT


Top
 Profile  
 
 Post subject: Re: Looking for a Super X One
PostPosted: Tue Aug 25, 2020 9:07 pm 
Limited Edition

Joined: Wed Dec 28, 2005 9:38 pm
Posts: 381
Location: TEXAS U.S.A.
[/quote]This is a little off topic of Super X 1's, but what is everyone's favorite bore scrubber? Something I can use on the mag tube and in the barrel?[/quote]

Food for thought... you might find something here by diyguy, perhaps something that's less chemically harmful to the human body is the better way to go.
https://www.shotgunworld.com/bbs/viewto ... 2&t=398836


Top
 Profile  
 
 Post subject: Re: Looking for a Super X One
PostPosted: Wed Aug 26, 2020 7:24 am 
Tournament Grade

Joined: Wed Oct 01, 2014 8:49 pm
Posts: 230
searun wrote:
Jordan,

Nu-LIne Guns has them. Part # USR-94E.
They are nice and small.

CT


Thank you sir! You have all the answers lol.


Top
 Profile  
 
 Post subject: Re: Looking for a Super X One
PostPosted: Wed Aug 26, 2020 7:26 am 
Tournament Grade

Joined: Wed Oct 01, 2014 8:49 pm
Posts: 230
sx1 fan wrote:
This is a little off topic of Super X 1's, but what is everyone's favorite bore scrubber? Something I can use on the mag tube and in the barrel?[/quote]

Food for thought... you might find something here by diyguy, perhaps something that's less chemically harmful to the human body is the better way to go.
https://www.shotgunworld.com/bbs/viewto ... 2&t=398836[/quote]

I remember DIYGUY's post, they were always very informative.

Wonder what ever happened to him? I see he hasn't posted in a while....


Top
 Profile  
 
 Post subject: Re: Looking for a Super X One
PostPosted: Mon Aug 31, 2020 11:16 am 
Tournament Grade

Joined: Wed Oct 01, 2014 8:49 pm
Posts: 230
Shot the Super X 1 again this weekend. I get compliments on it every time I take it out.

Still hitting clays with the IM barrel. I get to try it at 100 rounds of sporting clays on Friday at a Charity shoot my wife is sponsoring through here work.

That will be the true test and the first time I'll have ever done a whole round of sporting clays.


Top
 Profile  
 
 Post subject: Re: Looking for a Super X One
PostPosted: Fri Sep 11, 2020 7:41 am 
Tournament Grade

Joined: Wed Oct 01, 2014 8:49 pm
Posts: 230
Thanks to this forum, I've got an IC barrel on the way.

Between the IC and IM barrel, I think I'll be covered on any game I would want to play.

Still love the gun, shot sporting clays last night, between the weight, gas actions of the SX1, and the light target loads in Winchester Super Target or AA's ( 1 & 1/8 oz at 1145 fps) I have no shoulder fatigue, I can barely tell I have shot any. That is a lot different than my model 12's!

One question, what is everyone using for a good gun case for their SX1 and going to the range?


Top
 Profile  
 
 Post subject: Re: Looking for a Super X One
PostPosted: Fri Sep 11, 2020 12:28 pm 
Presentation Grade
User avatar

Joined: Wed Feb 09, 2011 8:12 pm
Posts: 587
Location: Oregon
Jordan,

I use a Briley gun slip because there is no zipper involved that can mar the wood or metal.

CT




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 68 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 35, Anatidae, baltz526, Basstar, bbush, Bing [Bot], birdshot8'S, Bladeswitcher, Burnt Powder, cbradford, cfrobco, cookoff013, dfw_bill, Ernest T, EuroMan, F*W*F, Flyn'dutchman, friend of a friend, Gadwall, GD1656, Google [Bot], Google Adsense [Bot], Harborcat, HenryVac, IANative, jcrisp, Jeepwm69, ken325, komatsu, krimmie, leftex, liveblues, mactownbob, maggs01, Mallard Cutter, msmith, nkhrfh, outdoorbum, oyeme, painter*, Pay2Play, popcorn09, Road Man, rosiesdad, RUT, Saltydog055, shacked, strut64, Supermario, Take-5-JB, Tall Pine, Tidefanatic, torreyinreno, Troyite, VdoMemorie, Vette Jockey2, William Clunie


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice