ShotGunWorld Shotguns

It is currently Sat Jun 12, 2021 6:29 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Benelli inertia feed
PostPosted: Mon Apr 26, 2021 6:45 am 
Limited Edition

Joined: Wed Aug 31, 2005 1:26 pm
Posts: 475
Location: Hicksville N.Y.
Guys, looking for a Benelli autoloader for skeet 20ga, 28" any suggestions? Interested in Model 10655 if the recoil is not bad. Thanks Joe



_________________
Being second isn't always a bad thing! Hey, it's the second mouse that gets the cheese!!!!!!


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Mon Apr 26, 2021 2:02 pm 
Limited Edition

Joined: Wed Aug 31, 2005 1:26 pm
Posts: 475
Location: Hicksville N.Y.
Hello!!! Is anybody there at Shotgunworld land?????

_________________
Being second isn't always a bad thing! Hey, it's the second mouse that gets the cheese!!!!!!


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Tue Apr 27, 2021 8:41 am 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8629
Location: Colorado Springs, Co
seacilian wrote:
Guys, looking for a Benelli autoloader for skeet 20ga, 28" any suggestions? Interested in Model 10655 if the recoil is not bad. Thanks Joe


It’s inertia operated. It will have MORE recoil than a gas gun.
I’ve never seen a Benelli 20 ga in competition.
Beretta, Remington 1100, etc.


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Tue Apr 27, 2021 9:14 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Tue Sep 28, 2004 10:10 pm
Posts: 1496
Location: New Hampshire, USA
But then again, nobody said anything about using it for competition. My primary clays gun is a Sport ll I've been using since 2006, and I don't find the recoil to be much different than my other gas operated guns. The real benefit comes to cleaning it, or not having to. :-) YMMV


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Tue Apr 27, 2021 9:36 am 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8629
Location: Colorado Springs, Co
RUT wrote:
But then again, nobody said anything about using it for competition. My primary clays gun is a Sport ll I've been using since 2006, and I don't find the recoil to be much different than my other gas operated guns. The real benefit comes to cleaning it, or not having to. :-) YMMV


Just using competition for an example.
If it were a great gun, more people would use it in competition.
I find a significant difference between gas and inertia guns.


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Tue Apr 27, 2021 10:36 am 
Shotgun Expert
Shotgun Expert
User avatar

Joined: Sat Sep 09, 2006 11:02 am
Posts: 27504
Location: Plainfield, IL
seacilian wrote:
Hello!!! Is anybody there at Shotgunworld land?????


You can do better than a SS for skeet: you have many other options.

_________________
--Randy

http://randywakeman.com/


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Tue Apr 27, 2021 5:29 pm 
Limited Edition

Joined: Wed Aug 31, 2005 1:26 pm
Posts: 475
Location: Hicksville N.Y.
I really want an inertia feed gun no more gas guns too much cleaning for the amount of shots I do. Thanks

_________________
Being second isn't always a bad thing! Hey, it's the second mouse that gets the cheese!!!!!!


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Tue Apr 27, 2021 6:12 pm 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Tue Sep 28, 2004 10:10 pm
Posts: 1496
Location: New Hampshire, USA
seacilian wrote:
I really want an inertia feed gun no more gas guns too much cleaning for the amount of shots I do. Thanks


Then don't be dissuaded by the naysayers, and get what you feel comfortable with. :wink:


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Thu Apr 29, 2021 8:30 pm 
Tournament Grade

Joined: Wed Apr 28, 2021 5:03 pm
Posts: 144
RUT wrote:
But then again, nobody said anything about using it for competition. My primary clays gun is a Sport ll I've been using since 2006, and I don't find the recoil to be much different than my other gas operated guns. The real benefit comes to cleaning it, or not having to. :-) YMMV


This:. I shot a Supersport for almost a decade. I'd shoot it in my skeet league now but bending over to pick up empties sucks so I switched to an O/U.


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Fri Apr 30, 2021 5:41 am 
*Proud to be a*
*Proud to be a*
User avatar

Joined: Tue Sep 28, 2004 10:10 pm
Posts: 1496
Location: New Hampshire, USA
>>but bending over to pick up empties sucks so I switched to an O/U<<

And that's why they invented long handled magnetic hull picker-uppers. I don't go anywhere without mine. :-)


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Fri Apr 30, 2021 9:00 pm 
Crown Grade

Joined: Wed Jan 08, 2014 10:27 am
Posts: 3132
Location: North Central West Virginia
Although Randy had (or maybe still has) an M2 that he used to shoot a lot of pheasants, he mostly bad mouths Benelli. I shoot a 12 gauge Montefeltro Sporting for clays, and my brother and nephews use SuperSports, and really, the recoil thing is all in somebody's mind. I see no difference in recoil, and the inertia guns are so much easier to clean and run like tanks.

We were shooting in a sporting clays outing yesterday and the team in front of us had 2 of the blue Beretta Smurf guns. Both of them had jams (one had multiple jams) during the round. And it wasn't the ammo, because we were all using the same Fiocchi ammo supplied by the shoot. Our Benellis ran like tanks.


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Fri Apr 30, 2021 10:18 pm 
Tournament Grade

Joined: Sat Jan 09, 2021 11:04 am
Posts: 120
Been shooting inertia for over twenty five years, no recoil to speak of and never a jam. Surprised anyone shoots gas guns anymore, thing of the past. I shoot with a couple buddies ,one has a new Browning Maxus gasser and the other a CZ inertia. Never a jam with the CZ , Browning might go four boxes at most before jamming. But to each his own, just my .002


Last edited by Moffett on Sat May 08, 2021 4:50 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sat May 01, 2021 7:52 am 
*Proud to be a*
*Proud to be a*

Joined: Sat Feb 19, 2005 7:25 pm
Posts: 9720
Location: Louisiana
Moffett wrote:
Been shooting inertia for over twenty five years, no recoil to speak of and never a jam. Surprised anyone shoots gas guns anymore, thing of the past. I shoot with a couple buddies ,one has a new Browning Maxus gasser and the other a Tristar low dollar inertia. Never a jam with the Tristar , Browning might go four boxes at most before jamming. But to each his own, just my .002


:lol: :lol: :lol:


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sat May 01, 2021 8:56 am 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8629
Location: Colorado Springs, Co
I have a SS and several Beretta SAs.
HUGH difference in felt recoil to me


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sat May 01, 2021 9:11 am 
Crown Grade

Joined: Thu Dec 05, 2013 7:11 am
Posts: 4781
Location: Western Tampa, FL
Dr Duk wrote:
I have a SS and several Beretta SAs.
HUGH difference in felt recoil to me


As much as I hate to do it; I agree with Dr Duk on this one. :oops: :?

I too find a very big difference in felt recoil between the two. As a result, I don't own any inertia operated guns. I guess it is all about the shooter's perception so there probably is no definitive answer.


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sat May 01, 2021 10:58 am 
Crown Grade
User avatar

Joined: Fri Apr 22, 2011 10:46 am
Posts: 8629
Location: Colorado Springs, Co
oyeme wrote:
Dr Duk wrote:
I have a SS and several Beretta SAs.
HUGH difference in felt recoil to me


As much as I hate to do it; I agree with Dr Duk on this one. :oops: :?

That wasn’t so hard, was it? :lol:

I too find a very big difference in felt recoil between the two. As a result, I don't own any inertia operated guns. I guess it is all about the shooter's perception so there probably is no definitive answer.


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sun May 02, 2021 2:00 pm 
Shotgun Expert
Shotgun Expert
User avatar

Joined: Sat Sep 09, 2006 11:02 am
Posts: 27504
Location: Plainfield, IL
oyeme wrote:
Dr Duk wrote:
I have a SS and several Beretta SAs.
HUGH difference in felt recoil to me


As much as I hate to do it; I agree with Dr Duk on this one. :oops: :?

I too find a very big difference in felt recoil between the two. As a result, I don't own any inertia operated guns. I guess it is all about the shooter's perception so there probably is no definitive answer.


It is a fact: fixed breech guns have more actual recoil than gas-operated guns. Subsequent testing entailed plugging the gas vents of the 1100, thereby measuring recoil force with the 1100's gas system deactivated. The bolt movement and gas venting in the gas operated semi-automatic gun tested reduced peak recoil force by between 20% and 25% and lengthened the duration of the recoil event . . . ”

Image

_________________
--Randy

http://randywakeman.com/


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sun May 02, 2021 3:00 pm 
*Proud to be a*
*Proud to be a*

Joined: Sat Feb 19, 2005 7:25 pm
Posts: 9720
Location: Louisiana
Too bad gas guns are a thing of the past. :lol: :lol: :lol:


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sun May 02, 2021 3:26 pm 
Shotgun Expert
Shotgun Expert
User avatar

Joined: Sat Sep 09, 2006 11:02 am
Posts: 27504
Location: Plainfield, IL
seacilian wrote:
Benelli inertia feed
Hello!!! Is anybody there at Shotgunworld land?????


I'm not sure where the term 'inertia feed' comes from. What operates the shell elevator is a spring. There are dozens of split bolt recoil-operated shotguns out there: all variations of the Bruno Civolani action.

You get to decide what your own recoil sensitivity threshold is. You brought up recoil: a heavy gas operated auto invariably wins in that department.

_________________
--Randy

http://randywakeman.com/


Top
 Profile  
 
 Post subject: Re: Benelli inertia feed
PostPosted: Sat May 08, 2021 11:04 am 
Tournament Grade

Joined: Thu Oct 06, 2011 4:14 pm
Posts: 164
Location: Newark, DE
Moffett wrote:
Been shooting inertia for over twenty five years, no recoil to speak of and never a jam. Surprised anyone shoots gas guns anymore, thing of the past. I shoot with a couple buddies ,one has a new Browning Maxus gasser and the other a Tristar low dollar inertia. Never a jam with the Tristar , Browning might go four boxes at most before jamming. But to each his own, just my .002


Tristars are gas guns, not inertia!




Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: 58PERAZZI, AJ-M12, Allguns, Bamaskeetshooter, Bing [Bot], birdhunter39, Bladeswitcher, Bob_K, BobK, bowlbouondgman, clayflingythingy, Clayshooter1, dcr5468, EricB, fredvon4, Gone shootin, Google [Bot], Google Adsense [Bot], hopper810, Jim18611865, jrmev, krimmie, Majestic-12 [Bot], moorewhiskey, oldshotty, Over-the-Hill, oyeme, piano2ner, saskbooknut, SDV, Specklebelly, Steelie68, strut64, TandT, toptechX6, Twodog, Z-Freak


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group    - DMCA Notice