[neil.crocker]

Has anyone had problems depressing the right hand shell stop to remove for cleaning the bolt and slide assembly ?? Even using a small brass drift over fingertip pressure I am not able to allow the bolt/slide to move forward out of the receiver. Cheers Neil

 

[neil.crocker]

I did enter in the title box ,Remington 11-87 but it seems to have disappeared from the post ,sorry .

 

[lt0026]

Wrong Forum.

 

[neil.crocker]

Sorry , is there a Remington only forum? that I should be asking this guestion, cheers Neil

 

[oregunner]

Not normal. Something is wrong.

 

[kopper13]

Could be crud built up under shell stop, or could be loose shell stop, remove trigger assembly for closer inspection , should be an easy fix.

 

[DoublesForever]

Sorry , is there a Remington only forum? that I should be asking this guestion, cheers Neil

There is a Remington forum. It is in this section further down from the Beretta one you posted in. The section is in alphabetical order.

 

[neil.crocker]

Could be crud built up under shell stop, or could be loose shell stop, remove trigger assembly for closer inspection , should be an easy fix.

I did remove the trigger group and the shell stop moves in , but not deep enough and it appears to be clean in the area it should move into ,many thanks for the input 👍 cheers Neil

 

[neil.crocker]

2

There is a Remington forum. It is in this section further down from the Beretta one you posted in. The section is in alphabetical order.

Thankyou I will check it out ,cheers Neil