Shotgun Forum banner

1187 Light Contour barrels

1757 Views 1 Reply 2 Participants Last post by  RON KONTOWSKY
I have a new Premier and I was told by a few people that their LC barrels patterned worse than the SP barrels and that it is dangerous to sand or smooth out the chambers and forcing cones on the Light Contour barrels. I don't have an SP to test out the theory. Any experience out there?

1 - 2 of 2 Posts
As long as your just polishing out the chamber there is plenty of meat in there, and it depends what length you plan on tapering your cone to before there is a safty issue. pLAY IT SAFE AND STAY AROUND 2.5" AND YOU WILL BE FINE.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.